54Mbps wifi router

54Mbps wifi router
54Mbps wifi router
Product Introduction
It is a router with wireless LAN function. It’s a high integrated residential broadband access device. This device provides one ADSL2+ RJ11 port, four build-in Ethernet ports and one wireless access point. It fully complaints ADSL2+/2 standards, it can provide high performance access to Internet, downstream up to 24Mbps and upstream up to 1Mbps.The Ethernet section complaints IEEE802.3/802.3u standards and wireless LAN complaints IEEE802.11b/g standards. Once this device is connected to Internet by DSL line, the computers on the LAN side can share the Internet access by Ethernet port or wireless access point, at the same time, these local computers can communicate with each other too, sharing the resources and files. This router is usually preferred to provide high access performance applications for the individual users, the SOHO, the small enterprise and so on.

Applications

1. Shared broadband internet access
2. Higher data rate broadband sharing

3. Audio and video streaming and transfer

4. PC file and application sharing

5. Network and online gaming



Basic feature
1.Support up to 8 Permanent Virtual Circuits(PVC)
2.Industry standard and interoperable DSL interface
3.Support video: IGMP Snooping, IGMP Proxy
4.General IP:NAT/PAT,DHCP server/relay, DNS relay
5.Routing: Static routing, RIP V1 and V2
6.Security: NAT, IP filtering, Password Authentication, DOS(Denial of Service)
7.Compatible with IEEE 802.11b, IEEE802.11g, 2.4GHz Compliant Equipment

External Connectors
1 push power switch

1DC power jack

1 factory reset button

4 LAN 10/100M Auto MDI/MDIX RJ45 ports

1WAN RJ11 DSL port

Protocol Feature
Bridging/Routing
RFC1483 Bridge

IEEE802.1D transparent bridging

Bridge Filtering

RFC 1483 Router

RIP 1&2 supported

DHCP (RFC1541) Server, Relay

Network Address Translation (NAT)/Network Address Port Translation (NAPT)

DNS relay

IGMP v1 and v2
Encapsulation
RFC 1483 router/bridge

PPPoA

PPPoE

MER
ADSL Feature
Support ANSI T1.413 Issue2

Support ITU G.992.1 (G.dmt) Annex A

Support ITU G.992.2 (G.lite) Annex A

Support ITU G.992.3 ADSL2 (G.dmt.bis) Annex A, L, M

Support ITU G.992.4 ADSL2 (G.lite.bis)

Support ITU G.992.5 ADSL2 plus
Ethernet Feature
Fully compliant with IEEE802.3/802.3u auto-negotiation function

Support 10base-T, 100base-TX

Support half duplex, full duplex

Support back pressure flow control for half duplex, IEEE802.3x flow control for full duplex

Support MDI/MDIX auto cross