1. Huawei E585 Router
2.7.2M wifi mifi router
3. E585 can share a 3G connection with up to five WiFi clients
Huawei E585 Router
one-touch portable mobile Wi-Fi hotspot device
Specifications
HSPA/HSUPA/HSDPA/UMTS/3G (2100MHz)
GSM/GPRS/EDGE (850/900/1800/1900MHz)
Downlink speed: up to 7.2 Mbps
Uplink speed: up to 5.76 Mbps
Memory card supported, up to 32GB microSD
Dimensions: 86 x 46.5 x 10.5mm
Weight: 90g approximately
External Interface: USB Interface Mini USB
Battery: Lithium Ion 1500 mAh 3.7 Volt
Operation time: Up to 5 hours
Standby time: Up to 100 hours
Power Supply: AC 100 Volt 240 Volt
DC 5.3 Volt 650 mAh
Antenna: Built-in
PnP
Operating System: Windows XP / Vista,7 and Mac OS
New ‘one-touch’ MiFi
The Huawei E585 is capable of hosting a mobile Wi-Fi hotspot that accommodates up to five compatible gadgets such as notebooks, handheld gaming consoles and iPads. Apart from enabling one button start up, it offers users an enhanced OLED screen that flashes details like the browsing time, the data usage, speed of the current connection and more. The online dashboard that the Huawei E585 display is operable with any browser. Additionally, the device can be charged while it is being used.
Saturday, August 13, 2011
Huawei E585 MiFi Router
1.Huawei E585 MiFi Router 3G wireless Router
2.Portable, essy carry
3.new switch: one-touch start
Huawei E585 MiFi Router
The Huawei E585 wireless modem sends out a Wi-Fi signal to give you internet connection whenever you need it. With your own mobile Wi-Fi connection (known as Mi-Fi) so you can connect different Wi-Fi enabled devices at once and get fast internet speeds with no wires, no hassles and no need for a Wi-Fi hotspot.
Specifications
HSPA/HSUPA/HSDPA/UMTS/3G (2100MHz)
GSM/GPRS/EDGE (850/900/1800/1900MHz)
Downlink speed: up to 7.2 Mbps -Uplink speed: up to 5.76 Mbps
Memory card supported, up to 32GB microSD - Dimensions: 86 x 46.5 x 10.5mm
Battery: Lithium Ion 1500 mAh 3.7 Volt
Operation time: Up to 5 hours; Standby time: Up to 100 hours
Power Supply: AC 100 Volt 240 Volt
DC 5.3 Volt 650 mAh - Antenna: Built-in - PnP
Operating System: Windows XP / Vista,7 and Mac OS
Weight: 90g approximately
External Interface: USB Interface Mini USB
2.Portable, essy carry
3.new switch: one-touch start
Huawei E585 MiFi Router
The Huawei E585 wireless modem sends out a Wi-Fi signal to give you internet connection whenever you need it. With your own mobile Wi-Fi connection (known as Mi-Fi) so you can connect different Wi-Fi enabled devices at once and get fast internet speeds with no wires, no hassles and no need for a Wi-Fi hotspot.
Specifications
HSPA/HSUPA/HSDPA/UMTS/3G (2100MHz)
GSM/GPRS/EDGE (850/900/1800/1900MHz)
Downlink speed: up to 7.2 Mbps -Uplink speed: up to 5.76 Mbps
Memory card supported, up to 32GB microSD - Dimensions: 86 x 46.5 x 10.5mm
Battery: Lithium Ion 1500 mAh 3.7 Volt
Operation time: Up to 5 hours; Standby time: Up to 100 hours
Power Supply: AC 100 Volt 240 Volt
DC 5.3 Volt 650 mAh - Antenna: Built-in - PnP
Operating System: Windows XP / Vista,7 and Mac OS
Weight: 90g approximately
External Interface: USB Interface Mini USB
300M Wireless LAN with internet-sharing router and 4-port switch
wireless lan
it is integrated with internet-sharing router and 4-port switch.
wireless lan
It is a combined wired/wireless network connection device integrated with internet-sharing router and 4-port switch. The wireless router is 802.11b & g compatible,and based on 802.11n technology and gives you 802.11n performance up to 300Mbps at an even more affordable price. Bordering on 11n and surpassing 11G speed enables high bandwidth consuming applications like video streaming to be more fluid. You can enjoy a high quality experience when video streaming, VoIP, or online gaming wirelessly, with traditional g products was never very practical, from anywhere in your entire home. Step into the 11n age with MT-WR850N-A!
When working with IEEE802.11n devices, the router provides robust and steady connections even at far distances from the router or existing obstacles in the way where normally 11g products would be weak and unstable. Better still, it´s backward compatible with existing 802.11b/g products.
Features
•Complies with the IEEE 802.11b/g and IEEE802.11n draft 2.0 standards
•1 10/100M Auto-Negotiation RJ45 WAN port, 4 10/100M Auto-Negotiation RJ45 LAN ports, supporting Auto MDI/MDIX.
•High data rate up to 300Mbps network speed
•Supports WDS (Wireless Distributed System) repeater mode
•Supports AP client,Bridge,Gateway mode
•Supports WPS (Wi-Fi Protected Setup) function
•Supports WEP,WPA-PSK,WPA2-PSK encryption security
•Wi-Fi alliance WMM (Wi-Fi Multimedia Enhancement) support
•Supports hidden SSID function
•Obtain WAN IP by PPPoE/DHCP/static IP/PPTP
•Provides DHCP server
•VPN pass through (L2TP/IPSec/PPTP)
•Ignores Ping packets from WAN to LAN ports
•Supports Virtual Server, Special Application and DMZ host
•Supports UPnP, Dynamic DNS
•Supports Flow Statistics
•Supports system status (port connectivity) and remote log for network management
•Shares data and Internet access for users, supporting PPPoE, Dynamic IP, Static IP, PPTP Internet access
•Supports ICMP-FLOOD, UDP-FLOOD, and TCP-SYN-FLOOD filter
•Supports firmware upgrade
•Supports Web management
•Built-in firewall supporting IP address filtering, Port filtering, and MAC address filtering
•Integrated anti-DOS firewall
it is integrated with internet-sharing router and 4-port switch.
wireless lan
It is a combined wired/wireless network connection device integrated with internet-sharing router and 4-port switch. The wireless router is 802.11b & g compatible,and based on 802.11n technology and gives you 802.11n performance up to 300Mbps at an even more affordable price. Bordering on 11n and surpassing 11G speed enables high bandwidth consuming applications like video streaming to be more fluid. You can enjoy a high quality experience when video streaming, VoIP, or online gaming wirelessly, with traditional g products was never very practical, from anywhere in your entire home. Step into the 11n age with MT-WR850N-A!
When working with IEEE802.11n devices, the router provides robust and steady connections even at far distances from the router or existing obstacles in the way where normally 11g products would be weak and unstable. Better still, it´s backward compatible with existing 802.11b/g products.
Features
•Complies with the IEEE 802.11b/g and IEEE802.11n draft 2.0 standards
•1 10/100M Auto-Negotiation RJ45 WAN port, 4 10/100M Auto-Negotiation RJ45 LAN ports, supporting Auto MDI/MDIX.
•High data rate up to 300Mbps network speed
•Supports WDS (Wireless Distributed System) repeater mode
•Supports AP client,Bridge,Gateway mode
•Supports WPS (Wi-Fi Protected Setup) function
•Supports WEP,WPA-PSK,WPA2-PSK encryption security
•Wi-Fi alliance WMM (Wi-Fi Multimedia Enhancement) support
•Supports hidden SSID function
•Obtain WAN IP by PPPoE/DHCP/static IP/PPTP
•Provides DHCP server
•VPN pass through (L2TP/IPSec/PPTP)
•Ignores Ping packets from WAN to LAN ports
•Supports Virtual Server, Special Application and DMZ host
•Supports UPnP, Dynamic DNS
•Supports Flow Statistics
•Supports system status (port connectivity) and remote log for network management
•Shares data and Internet access for users, supporting PPPoE, Dynamic IP, Static IP, PPTP Internet access
•Supports ICMP-FLOOD, UDP-FLOOD, and TCP-SYN-FLOOD filter
•Supports firmware upgrade
•Supports Web management
•Built-in firewall supporting IP address filtering, Port filtering, and MAC address filtering
•Integrated anti-DOS firewall
Huawei E585 wireless Router
1.Huawei E585 wireless Router 3G Mi-Fi
2.Portable, essy carry
3.new switch: one-touch start
Huawei E585 wireless Router ( 3G Mi-Fi)
The Huawei E585 wireless modem sends out a Wi-Fi signal to give you internet connection whenever you need it. With your own mobile Wi-Fi connection (known as Mi-Fi) so you can connect different Wi-Fi enabled devices at once and get fast internet speeds with no wires, no hassles and no need for a Wi-Fi hotspot.
Specifications
HSPA/HSUPA/HSDPA/UMTS/3G (2100MHz)
GSM/GPRS/EDGE (850/900/1800/1900MHz)
Downlink speed: up to 7.2 Mbps -Uplink speed: up to 5.76 Mbps
Memory card supported, up to 32GB microSD - Dimensions: 86 x 46.5 x 10.5mm
Battery: Lithium Ion 1500 mAh 3.7 Volt
Operation time: Up to 5 hours; Standby time: Up to 100 hours
Power Supply: AC 100 Volt 240 Volt
DC 5.3 Volt 650 mAh - Antenna: Built-in - PnP
Operating System: Windows XP / Vista,7 and Mac OS
Weight: 90g approximately
External Interface: USB Interface Mini USB
2.Portable, essy carry
3.new switch: one-touch start
Huawei E585 wireless Router ( 3G Mi-Fi)
The Huawei E585 wireless modem sends out a Wi-Fi signal to give you internet connection whenever you need it. With your own mobile Wi-Fi connection (known as Mi-Fi) so you can connect different Wi-Fi enabled devices at once and get fast internet speeds with no wires, no hassles and no need for a Wi-Fi hotspot.
Specifications
HSPA/HSUPA/HSDPA/UMTS/3G (2100MHz)
GSM/GPRS/EDGE (850/900/1800/1900MHz)
Downlink speed: up to 7.2 Mbps -Uplink speed: up to 5.76 Mbps
Memory card supported, up to 32GB microSD - Dimensions: 86 x 46.5 x 10.5mm
Battery: Lithium Ion 1500 mAh 3.7 Volt
Operation time: Up to 5 hours; Standby time: Up to 100 hours
Power Supply: AC 100 Volt 240 Volt
DC 5.3 Volt 650 mAh - Antenna: Built-in - PnP
Operating System: Windows XP / Vista,7 and Mac OS
Weight: 90g approximately
External Interface: USB Interface Mini USB
Huawei E970 Router unlocked
Huawei E970 Router unlocked
1.Portable with battery powered
2.3G Wi-Fi Router Huawei E970
3.Original and brand new
Huawei E970 Router unlocked
• Dimensions (Length x Width x Height): 155mm x 115mm x 28 mm
• Weight: <500 g
• External Interfaces
• Four LAN interfaces for the RJ 45
• One telephone interface for the RJ11
• WLAN: Maximum of 32 users
• Power supply interface and USB interface multiplex
• Indicators
One power supply indicator
One signal type indicator
One indicator for WLAN in service
One signal intensity indicator
Four Ethernet interfaces, each Ethernet interface has a LINK/ACTIVE indicator
• Antenna: Built-in antenna &with external antenna slot
• UIM: Supports the R-UIM mode
• Operating System (OS): Windows 2000, Windows XP, Windows Vista, and OS
• Band Class:
Supports HSDPA/UMTS 2100 M
Supports GSM/GPRS/EDGE 850/900/1800/1900 MHz
• Technical Standards
HSDPA/WCDMA: 3GPP R5 2004/06
1.Portable with battery powered
2.3G Wi-Fi Router Huawei E970
3.Original and brand new
Huawei E970 Router unlocked
• Dimensions (Length x Width x Height): 155mm x 115mm x 28 mm
• Weight: <500 g
• External Interfaces
• Four LAN interfaces for the RJ 45
• One telephone interface for the RJ11
• WLAN: Maximum of 32 users
• Power supply interface and USB interface multiplex
• Indicators
One power supply indicator
One signal type indicator
One indicator for WLAN in service
One signal intensity indicator
Four Ethernet interfaces, each Ethernet interface has a LINK/ACTIVE indicator
• Antenna: Built-in antenna &with external antenna slot
• UIM: Supports the R-UIM mode
• Operating System (OS): Windows 2000, Windows XP, Windows Vista, and OS
• Band Class:
Supports HSDPA/UMTS 2100 M
Supports GSM/GPRS/EDGE 850/900/1800/1900 MHz
• Technical Standards
HSDPA/WCDMA: 3GPP R5 2004/06
Huawei HG553 ADSL+Modem+3G Wireless Router+Print Server
Huawei HG553 ADSL+Modem+3G Wireless Router+Print Server
Best Quality and suitable price
Fast and safe delivery
Huawei HG553
Huawei HG553 is released as Vodafone E172 being the worlds slimmest and smallest HSUPA USB stick. A PDF user manual is available from Vodafone on set up your Huawei E172 modem. As the user manual is meant for use with Vodafone sim card, some features may not applicable if you are not using Vodafone.
Wireless Router 3G Huawei HG553 Spesification
4 in 1 functions
ADSL 2+modem + ADSL router + 3G router + Print Server
Hardware Specifications
Broadcom BCM6358 300MHz
16MB ROM
64MB RAM (yes, it is 64MB!!! best for smooth multi-stream downloading!)
2 usb port ( 1 for 3G usb modem, 1 for usb printer)
2 phone jack
adsl jack
4 lan port
wifi on/off button
built-in antenna
802.11b/g
Best Quality and suitable price
Fast and safe delivery
Huawei HG553
Huawei HG553 is released as Vodafone E172 being the worlds slimmest and smallest HSUPA USB stick. A PDF user manual is available from Vodafone on set up your Huawei E172 modem. As the user manual is meant for use with Vodafone sim card, some features may not applicable if you are not using Vodafone.
Wireless Router 3G Huawei HG553 Spesification
4 in 1 functions
ADSL 2+modem + ADSL router + 3G router + Print Server
Hardware Specifications
Broadcom BCM6358 300MHz
16MB ROM
64MB RAM (yes, it is 64MB!!! best for smooth multi-stream downloading!)
2 usb port ( 1 for 3G usb modem, 1 for usb printer)
2 phone jack
adsl jack
4 lan port
wifi on/off button
built-in antenna
802.11b/g
Huawei HG553 ADSL+Modem+3G Wireless Router+Print Server
Huawei HG553 ADSL+Modem+3G Wireless Router+Print Server
Best Quality and suitable price
Fast and safe delivery
Huawei HG553
Huawei HG553 is released as Vodafone E172 being the worlds slimmest and smallest HSUPA USB stick. A PDF user manual is available from Vodafone on set up your Huawei E172 modem. As the user manual is meant for use with Vodafone sim card, some features may not applicable if you are not using Vodafone.
Wireless Router 3G Huawei HG553 Spesification
4 in 1 functions
ADSL 2+modem + ADSL router + 3G router + Print Server
Hardware Specifications
Broadcom BCM6358 300MHz
16MB ROM
64MB RAM (yes, it is 64MB!!! best for smooth multi-stream downloading!)
2 usb port ( 1 for 3G usb modem, 1 for usb printer)
2 phone jack
adsl jack
4 lan port
wifi on/off button
built-in antenna
802.11b/g
Best Quality and suitable price
Fast and safe delivery
Huawei HG553
Huawei HG553 is released as Vodafone E172 being the worlds slimmest and smallest HSUPA USB stick. A PDF user manual is available from Vodafone on set up your Huawei E172 modem. As the user manual is meant for use with Vodafone sim card, some features may not applicable if you are not using Vodafone.
Wireless Router 3G Huawei HG553 Spesification
4 in 1 functions
ADSL 2+modem + ADSL router + 3G router + Print Server
Hardware Specifications
Broadcom BCM6358 300MHz
16MB ROM
64MB RAM (yes, it is 64MB!!! best for smooth multi-stream downloading!)
2 usb port ( 1 for 3G usb modem, 1 for usb printer)
2 phone jack
adsl jack
4 lan port
wifi on/off button
built-in antenna
802.11b/g
Huawei HG553 ADSL+Modem+3G Wireless Router+Print Server
1. Huawei HG553
2. Huawei HG553 54M 3G wireless router / built-in ADSL2+ 64M memory
3. INSTOCK
4. Lowest price
Specification:
1. Huawei HG553 ADSL+Modem+3G Wireless Router+Print Server
2. Huawei HG553 Vodafone WIFI 3G Router/Inbuilt ADSL2+/64M Momery
HG553 ADSL+Modem+3G Wireless Router+Print Server
3. Huawei HG553 Vodafone WIFI 3G Router/Inbuilt ADSL2+/64M Momery
4. Built-in ADSL2+ (built-in ADSL function, uses in the ADSL wide band, inserts directly telephone line equipment), the double USB connection (supports the USB2.0 standard), simultaneously supports the 3G wireless router. Is also the ordinary ADSL line and the 3G router dual-purpose
equipment.
Huawei HG553 54M 3G wireless router :
1. International brands Vodafone customized products company
2. Built ADSL2 (for ADSL broadband, plug devices directly to the telephone line), double USB interface (supports USB2.0 standard), support for 3G wireless router. That is, ordinary ADSL lines and dual-use equipment, 3G routers, CPU uses
3.
Broadcom BCM6358, 300MHZ processor, FLASH for the 16M, 64M large memory.
Reliable quality. Sale is guaranteed, the global supplier of networking products, highly recommended!
1. Build-in omnidirectional antenna
2. The transmission distance: Furthest indoor 100 meters, outdoor 300 meters
3. Support: IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u, IEEE 802.3x, CSMA / CA, CSMA / CD, TCP / IP, DHCP, ICMP, NAT, PPPoE
4. LAN port : 4 ,10/100M adaptive RJ45 Port (Auto MDI / MDIX)
WAN port :1 , 10/100M adaptive RJ45 Port (Auto MDI / MDIX)
5. Frequency Range : 2412~2462Mhz()
2412~2472Mhz()
6. Transfer rate 11g: 54/48/36/24/18/12/9/6M 11b: 11/5.5/2/1M
7. Data modulation BPSK, QPSK, CCK and OFDM (BPSK/QPSK/16-QAM / 64-QAM
8. RF power 17dBm (typical)
9. External power adapter output: DCPOE 12-18V 1A ,
Power consumption: 4.5W
10. Dimensions (L x W x H) 15x10x3 cm
2. Huawei HG553 54M 3G wireless router / built-in ADSL2+ 64M memory
3. INSTOCK
4. Lowest price
Specification:
1. Huawei HG553 ADSL+Modem+3G Wireless Router+Print Server
2. Huawei HG553 Vodafone WIFI 3G Router/Inbuilt ADSL2+/64M Momery
HG553 ADSL+Modem+3G Wireless Router+Print Server
3. Huawei HG553 Vodafone WIFI 3G Router/Inbuilt ADSL2+/64M Momery
4. Built-in ADSL2+ (built-in ADSL function, uses in the ADSL wide band, inserts directly telephone line equipment), the double USB connection (supports the USB2.0 standard), simultaneously supports the 3G wireless router. Is also the ordinary ADSL line and the 3G router dual-purpose
equipment.
Huawei HG553 54M 3G wireless router :
1. International brands Vodafone customized products company
2. Built ADSL2 (for ADSL broadband, plug devices directly to the telephone line), double USB interface (supports USB2.0 standard), support for 3G wireless router. That is, ordinary ADSL lines and dual-use equipment, 3G routers, CPU uses
3.
Broadcom BCM6358, 300MHZ processor, FLASH for the 16M, 64M large memory.
Reliable quality. Sale is guaranteed, the global supplier of networking products, highly recommended!
1. Build-in omnidirectional antenna
2. The transmission distance: Furthest indoor 100 meters, outdoor 300 meters
3. Support: IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u, IEEE 802.3x, CSMA / CA, CSMA / CD, TCP / IP, DHCP, ICMP, NAT, PPPoE
4. LAN port : 4 ,10/100M adaptive RJ45 Port (Auto MDI / MDIX)
WAN port :1 , 10/100M adaptive RJ45 Port (Auto MDI / MDIX)
5. Frequency Range : 2412~2462Mhz()
2412~2472Mhz()
6. Transfer rate 11g: 54/48/36/24/18/12/9/6M 11b: 11/5.5/2/1M
7. Data modulation BPSK, QPSK, CCK and OFDM (BPSK/QPSK/16-QAM / 64-QAM
8. RF power 17dBm (typical)
9. External power adapter output: DCPOE 12-18V 1A ,
Power consumption: 4.5W
10. Dimensions (L x W x H) 15x10x3 cm
Huawei Mi-Fi Router E585
1.Huawei Mi-Fi Router E585
2.Portable, essy carry
3.new switch: one-touch start
4.Huawei Mi-Fi Router E585 with good price
Huawei Mi-Fi Router E585
The Huawei E585 wireless modem sends out a Wi-Fi signal to give you internet connection whenever you need it. With your own mobile Wi-Fi connection (known as Mi-Fi) so you can connect different Wi-Fi enabled devices at once and get fast internet speeds with no wires, no hassles and no need for a Wi-Fi hotspot.
Specifications
HSPA/HSUPA/HSDPA/UMTS/3G (2100MHz)
GSM/GPRS/EDGE (850/900/1800/1900MHz)
Downlink speed: up to 7.2 Mbps -Uplink speed: up to 5.76 Mbps
Memory card supported, up to 32GB microSD - Dimensions: 86 x 46.5 x 10.5mm
Battery: Lithium Ion 1500 mAh 3.7 Volt
Operation time: Up to 5 hours; Standby time: Up to 100 hours
Power Supply: AC 100 Volt 240 Volt
DC 5.3 Volt 650 mAh - Antenna: Built-in - PnP
Operating System: Windows XP / Vista,7 and Mac OS
Weight: 90g approximately
External Interface: USB Interface Mini USB
2.Portable, essy carry
3.new switch: one-touch start
4.Huawei Mi-Fi Router E585 with good price
Huawei Mi-Fi Router E585
The Huawei E585 wireless modem sends out a Wi-Fi signal to give you internet connection whenever you need it. With your own mobile Wi-Fi connection (known as Mi-Fi) so you can connect different Wi-Fi enabled devices at once and get fast internet speeds with no wires, no hassles and no need for a Wi-Fi hotspot.
Specifications
HSPA/HSUPA/HSDPA/UMTS/3G (2100MHz)
GSM/GPRS/EDGE (850/900/1800/1900MHz)
Downlink speed: up to 7.2 Mbps -Uplink speed: up to 5.76 Mbps
Memory card supported, up to 32GB microSD - Dimensions: 86 x 46.5 x 10.5mm
Battery: Lithium Ion 1500 mAh 3.7 Volt
Operation time: Up to 5 hours; Standby time: Up to 100 hours
Power Supply: AC 100 Volt 240 Volt
DC 5.3 Volt 650 mAh - Antenna: Built-in - PnP
Operating System: Windows XP / Vista,7 and Mac OS
Weight: 90g approximately
External Interface: USB Interface Mini USB
Huawei Router D100 Unlocked Plag and Play
1. HUAWEI 3G USB Router D100
2. Compatible with Huawei USB Modem
3. Huawei Router D100 Unlocked Plag and Play
4. HUAWEI D100
Huawei Router D100 USB Modem Router
* Compatible with Huawei USB Modem
* Supports Multi-users
* Supports Wi-Fi speed rates of up to 54Mbps
* Antenna: built-in antenna
* No installation,plug and play
* Compatible with Huawei USB Modem
* Supports Multi-users
* Supports Wi-Fi speed rates of up to 54Mbps
* Supports RJ45: one LAN/WAN convertible port
* Standard: IEEE 802.11 g/IEEE 802.11b/IEEE 802.3/IEEE802.3U
* Antenna: built-in antenna
* Transmitting Power: 19dBm(maximum)
* User Interface: one Ethernet interface(RJ45)
* One USB interface of Type A
* No installation ,plug and play
* Dimensions: size:112mm x91mm x27mm
* Weight:200g
With D100 Router you can share a broadband connection without needing a landline.Just plug your 3 USB modem into the router and the wireless LAN network will kick in.
2. Compatible with Huawei USB Modem
3. Huawei Router D100 Unlocked Plag and Play
4. HUAWEI D100
Huawei Router D100 USB Modem Router
* Compatible with Huawei USB Modem
* Supports Multi-users
* Supports Wi-Fi speed rates of up to 54Mbps
* Antenna: built-in antenna
* No installation,plug and play
* Compatible with Huawei USB Modem
* Supports Multi-users
* Supports Wi-Fi speed rates of up to 54Mbps
* Supports RJ45: one LAN/WAN convertible port
* Standard: IEEE 802.11 g/IEEE 802.11b/IEEE 802.3/IEEE802.3U
* Antenna: built-in antenna
* Transmitting Power: 19dBm(maximum)
* User Interface: one Ethernet interface(RJ45)
* One USB interface of Type A
* No installation ,plug and play
* Dimensions: size:112mm x91mm x27mm
* Weight:200g
With D100 Router you can share a broadband connection without needing a landline.Just plug your 3 USB modem into the router and the wireless LAN network will kick in.
Huawei Router D100
1. HUAWEI 3G USB Router D100
2. Compatible with Huawei USB Modem
3. Huawei Router D100 Unlocked Plag and Play
4. HUAWEI D100
Huawei D100 USB Modem Router Features
* Compatible with Huawei USB Modem
* Supports Multi-users
* Supports Wi-Fi speed rates of up to 54Mbps
* Antenna: built-in antenna
* No installation ,plug and play
* Compatible with Huawei USB Modem
* Supports Multi-users
* Supports Wi-Fi speed rates of up to 54Mbps
* Supports RJ45: one LAN/WAN convertible port
* Standard: IEEE 802.11 g/IEEE 802.11b/IEEE 802.3/IEEE802.3U
* Antenna: built-in antenna
* Transmitting Power: 19dBm(maximum)
* User Interface: one Ethernet interface(RJ45)
* One USB interface of Type A
* No installation ,plug and play
* Dimensions: size:112mm x91mm x27mm
* Weight:200g
With D100 Router you can share a broadband connection without needing a landline.Just plug your 3 USB modem into the router and the wireless LAN network will kick in.
2. Compatible with Huawei USB Modem
3. Huawei Router D100 Unlocked Plag and Play
4. HUAWEI D100
Huawei D100 USB Modem Router Features
* Compatible with Huawei USB Modem
* Supports Multi-users
* Supports Wi-Fi speed rates of up to 54Mbps
* Antenna: built-in antenna
* No installation ,plug and play
* Compatible with Huawei USB Modem
* Supports Multi-users
* Supports Wi-Fi speed rates of up to 54Mbps
* Supports RJ45: one LAN/WAN convertible port
* Standard: IEEE 802.11 g/IEEE 802.11b/IEEE 802.3/IEEE802.3U
* Antenna: built-in antenna
* Transmitting Power: 19dBm(maximum)
* User Interface: one Ethernet interface(RJ45)
* One USB interface of Type A
* No installation ,plug and play
* Dimensions: size:112mm x91mm x27mm
* Weight:200g
With D100 Router you can share a broadband connection without needing a landline.Just plug your 3 USB modem into the router and the wireless LAN network will kick in.
Huawei Router HUAWEI D100
1. HUAWEI 3G USB Router D100
2. Compatible with Huawei USB Modem
3. Huawei Router D100 Unlocked Plag and Play
4. HUAWEI D100
Huawei D100 USB Modem Router Features
* Compatible with Huawei USB Modem
* Supports Multi-users
* Supports Wi-Fi speed rates of up to 54Mbps
* Antenna: built-in antenna
* No installation ,plug and play
* Compatible with Huawei USB Modem
* Supports Multi-users
* Supports Wi-Fi speed rates of up to 54Mbps
* Supports RJ45: one LAN/WAN convertible port
* Standard: IEEE 802.11 g/IEEE 802.11b/IEEE 802.3/IEEE802.3U
* Antenna: built-in antenna
* Transmitting Power: 19dBm(maximum)
* User Interface: one Ethernet interface(RJ45)
* One USB interface of Type A
* No installation ,plug and play
* Dimensions: size:112mm x91mm x27mm
* Weight:200g
With D100 Router you can share a broadband connection without needing a landline.Just plug your 3 USB modem into the router and the wireless LAN network will kick in.
2. Compatible with Huawei USB Modem
3. Huawei Router D100 Unlocked Plag and Play
4. HUAWEI D100
Huawei D100 USB Modem Router Features
* Compatible with Huawei USB Modem
* Supports Multi-users
* Supports Wi-Fi speed rates of up to 54Mbps
* Antenna: built-in antenna
* No installation ,plug and play
* Compatible with Huawei USB Modem
* Supports Multi-users
* Supports Wi-Fi speed rates of up to 54Mbps
* Supports RJ45: one LAN/WAN convertible port
* Standard: IEEE 802.11 g/IEEE 802.11b/IEEE 802.3/IEEE802.3U
* Antenna: built-in antenna
* Transmitting Power: 19dBm(maximum)
* User Interface: one Ethernet interface(RJ45)
* One USB interface of Type A
* No installation ,plug and play
* Dimensions: size:112mm x91mm x27mm
* Weight:200g
With D100 Router you can share a broadband connection without needing a landline.Just plug your 3 USB modem into the router and the wireless LAN network will kick in.
300M usb Mimo WiFi Router
300M Mimo WiFi Router
Chipset:Ralink 3052
SMA 2dBi antenna (2T2R)
1WAN port + 4LAN ports
Brand:Skylink WiFi mimo router
Product Overview
300M usb Mimo WiFi Router
Features<<
•Compatible with UMTS/HSPA/EVDO USB modems, tested in the field
•3G/WAN failover guarantees an 'always-online' Internet connection
Wireless N speed up to 300Mbps
•Supports PPPoE, Dynamic IP, Static IP, PPTP, L2TP Cable Internet access
•SST technology dramatically increases link robustness and stability
•CCA technology enhances your signal stablility by automatically avoiding channel conflicts
•Wireless security encryption easily at the push of the QSS button
•WDS wireless bridge provides seamless bridging to expand your wireless network
•IP based bandwidth control allows administrators to determine how much bandwidth is
allotted to each PC
Pictures<<
Chipset:Ralink 3052
SMA 2dBi antenna (2T2R)
1WAN port + 4LAN ports
Brand:Skylink WiFi mimo router
Product Overview
300M usb Mimo WiFi Router
Features<<
•Compatible with UMTS/HSPA/EVDO USB modems, tested in the field
•3G/WAN failover guarantees an 'always-online' Internet connection
Wireless N speed up to 300Mbps
•Supports PPPoE, Dynamic IP, Static IP, PPTP, L2TP Cable Internet access
•SST technology dramatically increases link robustness and stability
•CCA technology enhances your signal stablility by automatically avoiding channel conflicts
•Wireless security encryption easily at the push of the QSS button
•WDS wireless bridge provides seamless bridging to expand your wireless network
•IP based bandwidth control allows administrators to determine how much bandwidth is
allotted to each PC
Pictures<<
Huawei Wi-Fi Router D100
Huawei Wi-Fi Router D100
1.Support Multi-users
2.Support Wi-Fi speed rate up to 54Mbps
3.Huawei Wi-Fi Router D100
Huawei Wi-Fi Router D100
Compatible with HUAWEI USB Modem
Support Multi-users
Support Wi-Fi speed rate up to 54Mbps
Support RJ45:one LAN /WAN convertible port
Standard: IEEE 802.11 g/IEEE 802.11b/IEEE 802.3/IEEE802.3U
built-in antenna
Transmitting Power: 19dBm(maximum)
DC connector and external DC power supply
Chipset: BCM5354
Connector for external USB device
Up to 32 users connected through Wi-Fi
Size Dimensions: 110 x 90 x 27 mm
Weight: 200g
With our Huawei D100 wireless Router you can share a broadband connection without needing a landline. It's simple - just plug your huawei 3G USB modem into the router and the wireless LAN network will kick in. Anyone in your house can get online - no wires required!
1.Support Multi-users
2.Support Wi-Fi speed rate up to 54Mbps
3.Huawei Wi-Fi Router D100
Huawei Wi-Fi Router D100
Compatible with HUAWEI USB Modem
Support Multi-users
Support Wi-Fi speed rate up to 54Mbps
Support RJ45:one LAN /WAN convertible port
Standard: IEEE 802.11 g/IEEE 802.11b/IEEE 802.3/IEEE802.3U
built-in antenna
Transmitting Power: 19dBm(maximum)
DC connector and external DC power supply
Chipset: BCM5354
Connector for external USB device
Up to 32 users connected through Wi-Fi
Size Dimensions: 110 x 90 x 27 mm
Weight: 200g
With our Huawei D100 wireless Router you can share a broadband connection without needing a landline. It's simple - just plug your huawei 3G USB modem into the router and the wireless LAN network will kick in. Anyone in your house can get online - no wires required!
Huawei Wi-Fi Router E960
1.Huawei E960 Unlocked 3G wireless WiFi Router
2.100% unlocked and brand new
3. Huawei E960 with best price and quality
Huawei Wi-Fi Router E960
Supporting two working modes of the wireless gateway and USB modem
Supporting the HSDPA at a rate of 3.6/7.2 Mbit/s for downlink and 384 Kbit/s for uplink
Built-in WCDMA and WLAN high gain antenna, which supports receiving diversity and equalizer
Supporting Web-based management, parameter presetting, and plug-and-play
Ultrathin and artful ID
User-friendly design of indicators
Supporting three placement methods: desktop, desktop inclining, and wall-mounted
Item
Specification
Dimensions
155 mm × 115 mm × 28 mm
Net Weight
<500 g
External Interfaces
Four LAN interfaces for the RJ 45
One telephone interface for the RJ11
WLAN: maximum of 32 users
Power supply interface and USB interface multiplex
Indicators
One power supply indicator
One signal type indicator
One indicator for WLAN in service
One signal intensity indicator
Four Ethernet interfaces, each Ethernet interface has a LINK/ACTIVE indicator
Antenna
Built-in antenna
UIM
Supports the R-UIM mode
Operating System (OS)
Windows 2000, Windows XP, Windows Vista, 7, and MAC OS
Band Class
Supports HSDPA/UMTS 2100 M
Supports GSM/GPRS/EDGE 850/900/1800/1900 MHz
Technical Standards
1. HSDPA/WCDMA: 3GPP R5 2004/06
2. GSM/GPRA/EDGE: 3GPP R99 2003/12
2.100% unlocked and brand new
3. Huawei E960 with best price and quality
Huawei Wi-Fi Router E960
Supporting two working modes of the wireless gateway and USB modem
Supporting the HSDPA at a rate of 3.6/7.2 Mbit/s for downlink and 384 Kbit/s for uplink
Built-in WCDMA and WLAN high gain antenna, which supports receiving diversity and equalizer
Supporting Web-based management, parameter presetting, and plug-and-play
Ultrathin and artful ID
User-friendly design of indicators
Supporting three placement methods: desktop, desktop inclining, and wall-mounted
Item
Specification
Dimensions
155 mm × 115 mm × 28 mm
Net Weight
<500 g
External Interfaces
Four LAN interfaces for the RJ 45
One telephone interface for the RJ11
WLAN: maximum of 32 users
Power supply interface and USB interface multiplex
Indicators
One power supply indicator
One signal type indicator
One indicator for WLAN in service
One signal intensity indicator
Four Ethernet interfaces, each Ethernet interface has a LINK/ACTIVE indicator
Antenna
Built-in antenna
UIM
Supports the R-UIM mode
Operating System (OS)
Windows 2000, Windows XP, Windows Vista, 7, and MAC OS
Band Class
Supports HSDPA/UMTS 2100 M
Supports GSM/GPRS/EDGE 850/900/1800/1900 MHz
Technical Standards
1. HSDPA/WCDMA: 3GPP R5 2004/06
2. GSM/GPRA/EDGE: 3GPP R99 2003/12
Huawei Wi-Fi Router E960
1.Huawei Wi-Fi Router E960
2.100% unlocked and brand new
3. Huawei Wi-Fi Router E960 with good price and fast delivery
Huawei Wi-Fi Router E960
Supporting two working modes of the wireless gateway and USB modem
Supporting the HSDPA at a rate of 3.6/7.2 Mbit/s for downlink and 384 Kbit/s for uplink
Built-in WCDMA and WLAN high gain antenna, which supports receiving diversity and equalizer
Supporting Web-based management, parameter presetting, and plug-and-play
Ultrathin and artful ID
User-friendly design of indicators
Supporting three placement methods: desktop, desktop inclining, and wall-mounted
Item
Specification
Dimensions
155 mm × 115 mm × 28 mm
Net Weight
<500 g
External Interfaces
Four LAN interfaces for the RJ 45
One telephone interface for the RJ11
WLAN: maximum of 32 users
Power supply interface and USB interface multiplex
Indicators
One power supply indicator
One signal type indicator
One indicator for WLAN in service
One signal intensity indicator
Four Ethernet interfaces, each Ethernet interface has a LINK/ACTIVE indicator
Antenna
Built-in antenna
UIM
Supports the R-UIM mode
Operating System (OS)
Windows 2000, Windows XP, Windows Vista, 7, and MAC OS
Band Class
Supports HSDPA/UMTS 2100 M
Supports GSM/GPRS/EDGE 850/900/1800/1900 MHz
Technical Standards
1. HSDPA/WCDMA: 3GPP R5 2004/06
2. GSM/GPRA/EDGE: 3GPP R99 2003/12
2.100% unlocked and brand new
3. Huawei Wi-Fi Router E960 with good price and fast delivery
Huawei Wi-Fi Router E960
Supporting two working modes of the wireless gateway and USB modem
Supporting the HSDPA at a rate of 3.6/7.2 Mbit/s for downlink and 384 Kbit/s for uplink
Built-in WCDMA and WLAN high gain antenna, which supports receiving diversity and equalizer
Supporting Web-based management, parameter presetting, and plug-and-play
Ultrathin and artful ID
User-friendly design of indicators
Supporting three placement methods: desktop, desktop inclining, and wall-mounted
Item
Specification
Dimensions
155 mm × 115 mm × 28 mm
Net Weight
<500 g
External Interfaces
Four LAN interfaces for the RJ 45
One telephone interface for the RJ11
WLAN: maximum of 32 users
Power supply interface and USB interface multiplex
Indicators
One power supply indicator
One signal type indicator
One indicator for WLAN in service
One signal intensity indicator
Four Ethernet interfaces, each Ethernet interface has a LINK/ACTIVE indicator
Antenna
Built-in antenna
UIM
Supports the R-UIM mode
Operating System (OS)
Windows 2000, Windows XP, Windows Vista, 7, and MAC OS
Band Class
Supports HSDPA/UMTS 2100 M
Supports GSM/GPRS/EDGE 850/900/1800/1900 MHz
Technical Standards
1. HSDPA/WCDMA: 3GPP R5 2004/06
2. GSM/GPRA/EDGE: 3GPP R99 2003/12
IDM Claya YGA Series router cnc laser cutting machine
1.router Laser cutting machine
2.can cut carbon steel, stainless steel, copper, titanium, aluminum
3.plate from 0.2 till 68 mm
Router Laser cutting machines—IDM
TM
CLAYA Series
Who I am:
I am IDM
TM
YAG 500; I am a Cantilever Router Laser Cutting Machine using the well proven YAG crystal laser optical system technology. My laser power is 500 W maximum. All the optical system is located in the cantilever and water cooled. My laser wavelength is 1064 nmMy structure is well rigid; the steel is treated by an anti-corrosion layer of primer, and then painted.I have the fume aspiration system mounted directly; avoiding any air pollution and I have two drawers to facilitate the removal of the processed parts.The movement in X and Y axis is insured by high precision ball leads screws commanded by servomotors and high quality guiding rails. By this means I can move as fast as 5000 mm/s and cut as fast as 2000 mm/min with a precision of less than 0.05 mm.My effective cutting area is 1300 x 2500 mm. The height between the laser torch and the plate to be cut is automatically adjusted by autofocus.I can cut carbon steel, stainless steel, copper, titanium, aluminum plate from 0.2 till 6 mm.As well I can be use for engraving and markingAll the systems are controlled by a powerful computer aided by professional software.I am coming to you ready to be used with the laser power supply, the control cabinet and the chiller.The control cabinet command and control the SteelTailorTM YAG 500 movements, the power of the laser and the temperature of the cooling system.I weight 3000 kg and I need a floor surface of 6 x 6 mIn option I can be equipped with a device allowing me to cut shapes in pipes.It as to be noted that the cutting size and the power can be customized according the user needs.
Technical Data
Model
IDM
TM
YAG500
Effective cutting area
1300 mm x 2500 mm
Cutting thickness
0.2 mm – 6 mm
Material to be cut
Carbon steel, stainless steel, copper, aluminum, titanium,
Laser Maximum output power
500 W
Laser wavelength
1064 nm
Pulse frequency
1 – 300 Hz
Minimum line width
0.15 mm
Number of phases
3
Electrical supply
380V-50 Hz-100 A or other industrial supply
Chiller Power
5 HP
Accuracy
≤ 0.05 mm
Repeatability
≤ 0,03 mm
Maximum moving speed
5000 mm/min
Maximum cutting speed
2000 mm/min
Weight
3000 kg
2.can cut carbon steel, stainless steel, copper, titanium, aluminum
3.plate from 0.2 till 68 mm
Router Laser cutting machines—IDM
TM
CLAYA Series
Who I am:
I am IDM
TM
YAG 500; I am a Cantilever Router Laser Cutting Machine using the well proven YAG crystal laser optical system technology. My laser power is 500 W maximum. All the optical system is located in the cantilever and water cooled. My laser wavelength is 1064 nmMy structure is well rigid; the steel is treated by an anti-corrosion layer of primer, and then painted.I have the fume aspiration system mounted directly; avoiding any air pollution and I have two drawers to facilitate the removal of the processed parts.The movement in X and Y axis is insured by high precision ball leads screws commanded by servomotors and high quality guiding rails. By this means I can move as fast as 5000 mm/s and cut as fast as 2000 mm/min with a precision of less than 0.05 mm.My effective cutting area is 1300 x 2500 mm. The height between the laser torch and the plate to be cut is automatically adjusted by autofocus.I can cut carbon steel, stainless steel, copper, titanium, aluminum plate from 0.2 till 6 mm.As well I can be use for engraving and markingAll the systems are controlled by a powerful computer aided by professional software.I am coming to you ready to be used with the laser power supply, the control cabinet and the chiller.The control cabinet command and control the SteelTailorTM YAG 500 movements, the power of the laser and the temperature of the cooling system.I weight 3000 kg and I need a floor surface of 6 x 6 mIn option I can be equipped with a device allowing me to cut shapes in pipes.It as to be noted that the cutting size and the power can be customized according the user needs.
Technical Data
Model
IDM
TM
YAG500
Effective cutting area
1300 mm x 2500 mm
Cutting thickness
0.2 mm – 6 mm
Material to be cut
Carbon steel, stainless steel, copper, aluminum, titanium,
Laser Maximum output power
500 W
Laser wavelength
1064 nm
Pulse frequency
1 – 300 Hz
Minimum line width
0.15 mm
Number of phases
3
Electrical supply
380V-50 Hz-100 A or other industrial supply
Chiller Power
5 HP
Accuracy
≤ 0.05 mm
Repeatability
≤ 0,03 mm
Maximum moving speed
5000 mm/min
Maximum cutting speed
2000 mm/min
Weight
3000 kg
IEEE 802.11b/802.11g/802.11n/802.3u Telempire wireless Router(XG-01)
Telempire wireless Router(XG-01)
1. speeds up to 7.2Mbps,and 802.11b/g/n
2.compatible 3G/3.5G mobile
3,warranty:1year
Telempire 3G Portable Mobile Router
1. speeds up to 7.2Mbps,and 802.11b/g/n
2.compatible 3G/3.5G mobile
3,warranty:1year
3G Portable Wifi Router XG-01 Specification
XG-01 is 3G/3.5G Mobile Router will offer subscribers of wireless carriers the ability to share mobile Broadband access at speeds up to 7.2Mbps,and 802.11b/g/n connected stations from anywhere a compatible 3G/3.5G mobile signal is available.
XG-01G 3G Router is also good for ITSP,multi-branch offices or SOHO & Hot Spot applications combined with wireless broadband accessing.
XG-01G is versatile and easy-to-use device that provides excellent usability and various functions for applications from a distance.Integrated into devices or application systems,the wireless Router creates new Opportunities to manage resources more efficiently.
Product Description:
IEEE 802.11n Wireless Router for 3G Mobile Broadband
Standards
IEEE 802.11b/802.11g/802.11n/802.3u
Radio
WiFi
Output Power (Typical):
IEEE 802.11g
15dBm @ 54Mbps.
IEEE 802.11b
15dBm @ 11Mbps.
IEEE 802.11n:
14dBm @ HT20
Modulation:
IEEE 802.11g (OFDM)
64QAM, 16QAM, QPSK, BPSK
IEEE 802.11b (DSSS) CCK, DQPSK, DBPSK
Draft EWC 11n:
BPSK, QPSK, 16-QAM, 64-QAM
Operating Frequency:
USA (FCC) 11 Channels: 2.412GHz~2.462GHz
Europe (ETSI) 13 Channels: 2.412GHz~2.472GHz
Japan (ARIB) 13 Channels : 2.412GHz~2.472GHz
3G External USB Interface 3.5G Card
XG-01G is the latest step towards true wireless intelligence from the world leader in mobile solutions.
Hardware:
Memory Flash 4M; SDRAM 16M
Ports/Button:
1 WAN Port + 1 LAN Port
1 Reset Button: Reset to Factory Default
1 WPS Button
1 USB 2.0
Power Supply :
5V DC, 1A (switching) 3.6v Battery (2000mah) LED Indicator Power :
System; WPS; WAN; LAN
Software :
Security:
n 64/128-bits WEP IEEE 802.1x security ( EAP-TLS, EAP-TTLS, LEAP,. EAP-PEAP and Win XP PEAP included)
WPA/WPA2 support: Proprietary AES support in WDS mode WPS Support (PIN and PBC)
Firewall:
SPI packet-filtering; IP address port-filtering; MAC address port-filtering (support up to 32 users);
URL filter; Anti-Dos attack; Anti-ping; DHCP Sever; Support MAC/IP address binding
Feature:
NAT with virtual server and port forward functions; DMZ host; DDNS; Firewall with packet filtering and network access rules; IGMP Proxy/UPNP; Bandwidth Management; VPN IPSec pass-through; WDS :Bridge ,Repeater ,Lazy mode ,Support WEP,TKIP,AES; WMM,WPS; SNMP V1,V2; Multi-SSID support up to 4;
Routing:
Static routing managed; Dynamic routing protocol (RIPv1,RIP2,OSPFv2,OSPFv3,BGP-4); NAPT address port mapping
Traffic Management:
Up &Downlink traffic management respectively;
Support fair polling mode; Support Priority mode;
Support limiting bandwidth mode; Support redundant bandwidth mode; Support DSCP
Management:
Web- based configuration and management interface;
Firmware upgrade through WEB/TFTP; Configuration file backup through WEB;
Support Remote Logging
Support parameter backup and restore
Support Automatic Testing
Antenna
Antenna: 4dBi internal Antenna or 4dBi external option
Physical & Environmental
Dimensions
Weight : TBD
Operating Temperature : 0~55°C
Operating Humidity : -20~75°C
Storage Temperature : 90% (Non-condensing)
Storage Humidity : 5~95%(Non-condensing)
Warranty:
12 months
1. speeds up to 7.2Mbps,and 802.11b/g/n
2.compatible 3G/3.5G mobile
3,warranty:1year
Telempire 3G Portable Mobile Router
1. speeds up to 7.2Mbps,and 802.11b/g/n
2.compatible 3G/3.5G mobile
3,warranty:1year
3G Portable Wifi Router XG-01 Specification
XG-01 is 3G/3.5G Mobile Router will offer subscribers of wireless carriers the ability to share mobile Broadband access at speeds up to 7.2Mbps,and 802.11b/g/n connected stations from anywhere a compatible 3G/3.5G mobile signal is available.
XG-01G 3G Router is also good for ITSP,multi-branch offices or SOHO & Hot Spot applications combined with wireless broadband accessing.
XG-01G is versatile and easy-to-use device that provides excellent usability and various functions for applications from a distance.Integrated into devices or application systems,the wireless Router creates new Opportunities to manage resources more efficiently.
Product Description:
IEEE 802.11n Wireless Router for 3G Mobile Broadband
Standards
IEEE 802.11b/802.11g/802.11n/802.3u
Radio
WiFi
Output Power (Typical):
IEEE 802.11g
15dBm @ 54Mbps.
IEEE 802.11b
15dBm @ 11Mbps.
IEEE 802.11n:
14dBm @ HT20
Modulation:
IEEE 802.11g (OFDM)
64QAM, 16QAM, QPSK, BPSK
IEEE 802.11b (DSSS) CCK, DQPSK, DBPSK
Draft EWC 11n:
BPSK, QPSK, 16-QAM, 64-QAM
Operating Frequency:
USA (FCC) 11 Channels: 2.412GHz~2.462GHz
Europe (ETSI) 13 Channels: 2.412GHz~2.472GHz
Japan (ARIB) 13 Channels : 2.412GHz~2.472GHz
3G External USB Interface 3.5G Card
XG-01G is the latest step towards true wireless intelligence from the world leader in mobile solutions.
Hardware:
Memory Flash 4M; SDRAM 16M
Ports/Button:
1 WAN Port + 1 LAN Port
1 Reset Button: Reset to Factory Default
1 WPS Button
1 USB 2.0
Power Supply :
5V DC, 1A (switching) 3.6v Battery (2000mah) LED Indicator Power :
System; WPS; WAN; LAN
Software :
Security:
n 64/128-bits WEP IEEE 802.1x security ( EAP-TLS, EAP-TTLS, LEAP,. EAP-PEAP and Win XP PEAP included)
WPA/WPA2 support: Proprietary AES support in WDS mode WPS Support (PIN and PBC)
Firewall:
SPI packet-filtering; IP address port-filtering; MAC address port-filtering (support up to 32 users);
URL filter; Anti-Dos attack; Anti-ping; DHCP Sever; Support MAC/IP address binding
Feature:
NAT with virtual server and port forward functions; DMZ host; DDNS; Firewall with packet filtering and network access rules; IGMP Proxy/UPNP; Bandwidth Management; VPN IPSec pass-through; WDS :Bridge ,Repeater ,Lazy mode ,Support WEP,TKIP,AES; WMM,WPS; SNMP V1,V2; Multi-SSID support up to 4;
Routing:
Static routing managed; Dynamic routing protocol (RIPv1,RIP2,OSPFv2,OSPFv3,BGP-4); NAPT address port mapping
Traffic Management:
Up &Downlink traffic management respectively;
Support fair polling mode; Support Priority mode;
Support limiting bandwidth mode; Support redundant bandwidth mode; Support DSCP
Management:
Web- based configuration and management interface;
Firmware upgrade through WEB/TFTP; Configuration file backup through WEB;
Support Remote Logging
Support parameter backup and restore
Support Automatic Testing
Antenna
Antenna: 4dBi internal Antenna or 4dBi external option
Physical & Environmental
Dimensions
Weight : TBD
Operating Temperature : 0~55°C
Operating Humidity : -20~75°C
Storage Temperature : 90% (Non-condensing)
Storage Humidity : 5~95%(Non-condensing)
Warranty:
12 months
IEEE802.11n Wireless 3G Router 3G003
IEEE802.11n Wireless 3G Router 3G003,300Mbps high speed transmission rates,easy configuration,can connection USB 3G modem
IEEE802.11n Wireless 3G Router 3G003
Detail Information:
Wireless AP, Router, and Firewall
Complies with IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.3, and IEEE 802.3u standards
Supports double the transmission range of 802.11g products
Provides 300Mbps transmission rates 300Mbps transmission rates
WISP access
Meets 64/128-bit WEP, WPA, and WPA2 security standards
Setup wizard for fast and easy configuration
WPS enabled device
Provides one 10/100Mbps Auto-Negotiation Ethernet LAN/WAN port
Provides one USB 2.0 port for 3G USB modem connection
Supports xDSL/cable modem static, dynamic, and PPPOE connections
Supports remote/local web management
Supports wireless roaming technology for highly efficient connections
Supports SSID stealth mode and a MAC address access control
Supports access control of up to 30 entries of MAC addresses
Supports Auto MDI/MDIX
Provides a router system log
Supports auto negotiation/manual mode for 802.11b/802.11g/802.11n
Supports UPnP and DDNS
Supports LAN access control over Internet connection
Supports virtual server, DMZ host
Powered by either over USB port or power adapter
Mini design
QoS bandwidth control
Input Voltage Range
AC:100~240V;50/60Hz
Output Voltage Range
DC 5V,1.0A
Consumption
<5W
Operating Temperature
0°C ~ 40°C
Storage Temperature
-40°C ~ 70°C
Operating Humidity
10% ~ 90% RH non-condensing
Storage Humidity
5% ~ 90% RH non-condensing
Antenna
One internal fixed PCB antennas
Frequency Range
2.4GHz
IEEE 802.11 Standards Supported
IEEE802.11b ; IEEE802.11g ; IEEE802.11n
Transmission Power EIRP
20dbm
EVM
-30dB
Sensitivity
54M:-72dBm@10% PER; 11M:-85dBm@8% PER; 6M:-88dBm@10% PER; 1M:-92dBm@8% PER
WLAN→LAN
90Mbps
WLAN→WLAN
80Mbps
Frequency Range
2.4GHz-2.5GHz
Gain
0dBi
IEEE802.11n Wireless 3G Router 3G003
Detail Information:
Wireless AP, Router, and Firewall
Complies with IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.3, and IEEE 802.3u standards
Supports double the transmission range of 802.11g products
Provides 300Mbps transmission rates 300Mbps transmission rates
WISP access
Meets 64/128-bit WEP, WPA, and WPA2 security standards
Setup wizard for fast and easy configuration
WPS enabled device
Provides one 10/100Mbps Auto-Negotiation Ethernet LAN/WAN port
Provides one USB 2.0 port for 3G USB modem connection
Supports xDSL/cable modem static, dynamic, and PPPOE connections
Supports remote/local web management
Supports wireless roaming technology for highly efficient connections
Supports SSID stealth mode and a MAC address access control
Supports access control of up to 30 entries of MAC addresses
Supports Auto MDI/MDIX
Provides a router system log
Supports auto negotiation/manual mode for 802.11b/802.11g/802.11n
Supports UPnP and DDNS
Supports LAN access control over Internet connection
Supports virtual server, DMZ host
Powered by either over USB port or power adapter
Mini design
QoS bandwidth control
Input Voltage Range
AC:100~240V;50/60Hz
Output Voltage Range
DC 5V,1.0A
Consumption
<5W
Operating Temperature
0°C ~ 40°C
Storage Temperature
-40°C ~ 70°C
Operating Humidity
10% ~ 90% RH non-condensing
Storage Humidity
5% ~ 90% RH non-condensing
Antenna
One internal fixed PCB antennas
Frequency Range
2.4GHz
IEEE 802.11 Standards Supported
IEEE802.11b ; IEEE802.11g ; IEEE802.11n
Transmission Power EIRP
20dbm
EVM
-30dB
Sensitivity
54M:-72dBm@10% PER; 11M:-85dBm@8% PER; 6M:-88dBm@10% PER; 1M:-92dBm@8% PER
WLAN→LAN
90Mbps
WLAN→WLAN
80Mbps
Frequency Range
2.4GHz-2.5GHz
Gain
0dBi
IEEE802.11n/g/b Wireless Router W001
IEEE802.11n/g/b Wireless Router W001,integrates the wireless AP, router, four-port switch and firewall in one,150Mbps speed
IEEE802.11n/g/b Wireless Router W001
features:
Includes router, wireless access point, four-port switch and firewall in one
Provides up to 150Mbps uploading and downloading speed
Supports two WPS (Wi-Fi Protected Setup) encryption methods: PBC and PIN
Compliant to IEEE802.11n, IEEE802.11g, IEEE802.11b, IEEE802.3 and IEEE802.3u standards
Supports far-distance transmission, 100 meters indoor, 400 meters outdoor (depends on the environments around)
Supports 64/128-bit WEP encryption, WPA and the latest WPA2 encryption security authentication
Supports RTS/CTS protocol and data partitioning function
Provides one 10/100Mbps Auto-Negotiation Ethernet WAN ports for WAN connection
Provides four 10/100Mbps Auto-Negotiation Ethernet LAN ports for LAN connections
Supports xDSL/Cable MODEM, static and dynamic IP in community networking
Supports remote/local Web management
Supports WMM to better smooth your voice and video
Supports SSID stealth mode and access control based over MAC address (up to 30 entries)
Supports Auto MDI/MDIX
Supports wireless Roaming technology and ensures high-efficient wireless connections
Supports auto negotiation/manual mode for 802.11b/802.11g/802.11n
Supports UPnP and DDNS
Supports Firefox 1.0, IE5.5 or above
Supports SNTP
Supports virtual server, DMZ host
Built-in firewall for hacker’s attack prevention
Supports DHCP server/client
Supports auto wireless channel selection
Supports the control over LAN access to Internet
Provides syslog to record the status of the router
Supports WDS wireless network extension
Supports QoS function
Input Voltage Range
AC 110~240V
Output Voltage Range
9W~1000mA
Consumption
1W
OperatingTemperature
0’c ~ 40’c
Storage Temperature
-40’c ~ 70’c
Operating Humidity
10% ~ 90% RH non-condensing
Storage Humidity
5% ~ 90% RH non-condensing
Antenna
2 printed antennas
IEEE802.11 Standards Supported
IEEE802.11b ;IEEE802.11g ;IEEE802.11n
Transmission Power EIRP
20dbm
EVM
-30dB
Sensitivity
54M:-73dBm@10% PER; 11M:-85dBm@8% PER; 6M:-88dBm@10% PER; 1M:-92dBm@8% PER
Outdoor
150 m
Indoor
100 m
WLAN→LAN
120Mbps
WLAN→WLAN
75Mbps
Frequency Range
2.4GHz~2.4835GHz
IP Address
192.168.0.254
User Name\Password
admin\admin
CE
yes
ROHS
yes
Standards and Protocols Supported
IEEE802.3;IEEE802.3u;IEEE802.3p;IEE80.3x;SNMP
Backplane Bandwidth
2000Mbps for Gigabit LAN port in full-duplex mode
Filtering Address Table
1K
Three-step-installation Suggestion
1. Follow the instructions on Quick Installation Guide to connect your cables; 2. Insert the included CD-ROM into the CD-ROM drive of your computer; 3. Use the Setup Wizard in CD-ROM to install the device
Network
Internet Explorer 5.5 or Firefox 1.0 Higher
Network Adapter
Need
Power Supply
One Power Adapter
The Control software interface
English, French. German, Spanish, Portuguese, Russian, Italian, polish, Turkey, Arabia.
User Manual
yes
IEEE802.11n/g/b Wireless Router W001
features:
Includes router, wireless access point, four-port switch and firewall in one
Provides up to 150Mbps uploading and downloading speed
Supports two WPS (Wi-Fi Protected Setup) encryption methods: PBC and PIN
Compliant to IEEE802.11n, IEEE802.11g, IEEE802.11b, IEEE802.3 and IEEE802.3u standards
Supports far-distance transmission, 100 meters indoor, 400 meters outdoor (depends on the environments around)
Supports 64/128-bit WEP encryption, WPA and the latest WPA2 encryption security authentication
Supports RTS/CTS protocol and data partitioning function
Provides one 10/100Mbps Auto-Negotiation Ethernet WAN ports for WAN connection
Provides four 10/100Mbps Auto-Negotiation Ethernet LAN ports for LAN connections
Supports xDSL/Cable MODEM, static and dynamic IP in community networking
Supports remote/local Web management
Supports WMM to better smooth your voice and video
Supports SSID stealth mode and access control based over MAC address (up to 30 entries)
Supports Auto MDI/MDIX
Supports wireless Roaming technology and ensures high-efficient wireless connections
Supports auto negotiation/manual mode for 802.11b/802.11g/802.11n
Supports UPnP and DDNS
Supports Firefox 1.0, IE5.5 or above
Supports SNTP
Supports virtual server, DMZ host
Built-in firewall for hacker’s attack prevention
Supports DHCP server/client
Supports auto wireless channel selection
Supports the control over LAN access to Internet
Provides syslog to record the status of the router
Supports WDS wireless network extension
Supports QoS function
Input Voltage Range
AC 110~240V
Output Voltage Range
9W~1000mA
Consumption
1W
OperatingTemperature
0’c ~ 40’c
Storage Temperature
-40’c ~ 70’c
Operating Humidity
10% ~ 90% RH non-condensing
Storage Humidity
5% ~ 90% RH non-condensing
Antenna
2 printed antennas
IEEE802.11 Standards Supported
IEEE802.11b ;IEEE802.11g ;IEEE802.11n
Transmission Power EIRP
20dbm
EVM
-30dB
Sensitivity
54M:-73dBm@10% PER; 11M:-85dBm@8% PER; 6M:-88dBm@10% PER; 1M:-92dBm@8% PER
Outdoor
150 m
Indoor
100 m
WLAN→LAN
120Mbps
WLAN→WLAN
75Mbps
Frequency Range
2.4GHz~2.4835GHz
IP Address
192.168.0.254
User Name\Password
admin\admin
CE
yes
ROHS
yes
Standards and Protocols Supported
IEEE802.3;IEEE802.3u;IEEE802.3p;IEE80.3x;SNMP
Backplane Bandwidth
2000Mbps for Gigabit LAN port in full-duplex mode
Filtering Address Table
1K
Three-step-installation Suggestion
1. Follow the instructions on Quick Installation Guide to connect your cables; 2. Insert the included CD-ROM into the CD-ROM drive of your computer; 3. Use the Setup Wizard in CD-ROM to install the device
Network
Internet Explorer 5.5 or Firefox 1.0 Higher
Network Adapter
Need
Power Supply
One Power Adapter
The Control software interface
English, French. German, Spanish, Portuguese, Russian, Italian, polish, Turkey, Arabia.
User Manual
yes
INTERNET SHARING ROUTER FOR AZBOX CAPTIVEWORKS COOLSAT
1.support linux
2.PD-wrt+open-wrt
4.DECODED NAGRA 3 PROGRAM
INTERNET SHARING ROUTER FOR AZBOX CAPTIVEWORKS COOLSAT
1.support linux
2.PD-wrt
3.open-wrt
Wireless Internet Key Sharing Client for Free to Air Satellite Receivers
Our SSSP Client can provide Card Sharing aka"IKS" for the following receivers
Captive works 600s, 600p, 650c, 700 and 800 models
Coolsat 4000,5000 and 6000 models
Azbox evo xs, Azbox s720usb, Azbox s710usb,Azbox s700b ntsc that are sssp compatible and many other sssp compatible receivers.
The sssp client is very easy to configure throgh its web interface menu and you can be connected and running to your satellite receiver in as little as 5 minutes. There is no need to run any software on your computer and the sssp client will connect to your wireless router. You can have one sssp client for each satellite receiver to free your self from running anoying cables or expensive home plugs. You can also use the sssp client as a wireless bridge for your blu-ray player or xbox 360 and connect up to 5 devices at once to the sssp client with almost no configuration.
Setup instruction:
Step 1.
Log into the dongle by connecting your pc into one of the 4 lan ports and grabbing a dhcp ip address. after that you log into the web interface by typing 192.168.1.1 into the url bar of your web browser.
Step 2.
Go to the connection page. Select wireless bridge. set the bridge ip to an address in the subbnet of your primary router. If your primary router is 192.168.0.1 then set it to 192.168.0.2 or similar. and if its 192.168.1.1 set it to 192.168.1.2 or similar. remember after you change this number and save, you will need to type that number into the url bar. Set the subnet mask to 255.255.255.0. set the ap/gateway ip address to that of your primary router. Like 192.168.0.1 or 192.168.1.1 depending on which brand you have. Select repeater disable. then click scan and select your primary router from the list. then enter your password if any and click save. wait about 2 minutes and enter the new ip address that you had selected for the bridge ip into the url bar.
Step 3.
Relocate your dongle from your pc to your satellite receiver and connect the serial cable that came with your satellite receiver to the x-fta dongle. then power on the x-fta dongle and wait 2 minutes before connecting to it from your pc. After you log into the x-fta dongle, please go to the satellite menu and check enable rq-sssp. Then go down to receiver settings and and select which type of satellite receiver you have. Coolsat, Captiveworks or gbox for all others. Then go down to card server settings and on the existing one click edit. Leave the host alone, set the port to 11112, username is timmy and your password is worren . des key is C67A0C1A16ACD4FE5A6A64DBBAA9 . then click close and apply, after that click save all followed by build config file and then click start. and then you should have tv.
2.PD-wrt+open-wrt
4.DECODED NAGRA 3 PROGRAM
INTERNET SHARING ROUTER FOR AZBOX CAPTIVEWORKS COOLSAT
1.support linux
2.PD-wrt
3.open-wrt
Wireless Internet Key Sharing Client for Free to Air Satellite Receivers
Our SSSP Client can provide Card Sharing aka"IKS" for the following receivers
Captive works 600s, 600p, 650c, 700 and 800 models
Coolsat 4000,5000 and 6000 models
Azbox evo xs, Azbox s720usb, Azbox s710usb,Azbox s700b ntsc that are sssp compatible and many other sssp compatible receivers.
The sssp client is very easy to configure throgh its web interface menu and you can be connected and running to your satellite receiver in as little as 5 minutes. There is no need to run any software on your computer and the sssp client will connect to your wireless router. You can have one sssp client for each satellite receiver to free your self from running anoying cables or expensive home plugs. You can also use the sssp client as a wireless bridge for your blu-ray player or xbox 360 and connect up to 5 devices at once to the sssp client with almost no configuration.
Setup instruction:
Step 1.
Log into the dongle by connecting your pc into one of the 4 lan ports and grabbing a dhcp ip address. after that you log into the web interface by typing 192.168.1.1 into the url bar of your web browser.
Step 2.
Go to the connection page. Select wireless bridge. set the bridge ip to an address in the subbnet of your primary router. If your primary router is 192.168.0.1 then set it to 192.168.0.2 or similar. and if its 192.168.1.1 set it to 192.168.1.2 or similar. remember after you change this number and save, you will need to type that number into the url bar. Set the subnet mask to 255.255.255.0. set the ap/gateway ip address to that of your primary router. Like 192.168.0.1 or 192.168.1.1 depending on which brand you have. Select repeater disable. then click scan and select your primary router from the list. then enter your password if any and click save. wait about 2 minutes and enter the new ip address that you had selected for the bridge ip into the url bar.
Step 3.
Relocate your dongle from your pc to your satellite receiver and connect the serial cable that came with your satellite receiver to the x-fta dongle. then power on the x-fta dongle and wait 2 minutes before connecting to it from your pc. After you log into the x-fta dongle, please go to the satellite menu and check enable rq-sssp. Then go down to receiver settings and and select which type of satellite receiver you have. Coolsat, Captiveworks or gbox for all others. Then go down to card server settings and on the existing one click edit. Leave the host alone, set the port to 11112, username is timmy and your password is worren . des key is C67A0C1A16ACD4FE5A6A64DBBAA9 . then click close and apply, after that click save all followed by build config file and then click start. and then you should have tv.
Indoor High Power Wireless AP Router 802.11g
Indoor High Power Wireless AP Router 802.11g
1.Standard: IEEE 802.11g
2.Power:200mW,500mW,800mW
3.Gateway, Bridge mode
4.QoS
Indoor High Power Wireless AP Router 802.11g
FEATURES
Support Gateway, Bridge and Wireless ISP Mode
802.11b/g compliant
WEP, WPA Encryption- 64/128bit (WEP), WPA TKIP
Wireless users access control
Wireless sites survey
TCP/UDP/ICMP/ARP protocol stack
Dynamic DNS
WDS and AP+WDS
VPN Pass-through with multiple sessions
Firewall, DoS, IP/Port/MAC Filtering
Virtual DMZ
DHCP Client and Server
WAN access mode : PPPoE, PPTP, DHCP Client, Fixed IP
UPnP
QoS (per client up/down load bandwidth control)
SPECIFICATION
200mW-Support Passive POE
http://astech.en.alibaba.com/product/342087601-210519681/High_Power_Wireless_AP_Router_802_11g_200mW.html
Standard
IEEE 802.11b/g
Antenna
Omni Antenna (2.5 dBi) optional
Equipped
4 LAN port & 1 WAN port
Frequency Range
2.400GHz-2.4835GHz
Operating Frequency / Channel
2.412~2.462GHz (Canada, FCC) / 11 Channaels
2.412~2.484GHz (Japan, TELEC) / 14 Channels
2.412~2.472GHz (Euro, ETSI) / 13 Channels
Modulation Technique
Orthogonal frequency division multiplexing (OFDM)
Direct Sequence Spread Spectrum (CCK, DQPSK, DBPSK)
Security
64/128bit WEP, WPA, WPA2, 802.1x and 802.11)
Media Access Protocol
CSMA/CA (Collision Avcidance) with ACK
Output Power(Average )
54M/48M/36M :20dbm max
24M/18M/12M :23dbm max
9M/6M :23dbm max
11M/5.5M/2M/1M :23dbm max
Data Rate
11g : 54, 48, 38, 24, 18, 12, 9 and 6Mbps with auto-rate
11b : 11, 5.5, 2, and 1Mbps with auto-rate fall back
Sensitivity
54Mbps: -68dBm
11Mbps: -80dBm
Power adapter
DC 12V , 1.0A
Working Mode
Ad-Hoc or Infrastructure
Throughput
22Mbps@54Mbps: 5.5Mbps@11Mbps
Operating System Support
Windows 98SE/ME/2000/XP/Vista, MAC OS 10.4.8 & Linux
Approval
FCC Part 15 & CE
500mW-Support Passive POE
http://astech.en.alibaba.com/product/348297155-210519681/High_Power_Indoor_Wireless_AP_Router_802_11_b_g.html
Standard
IEEE 802.11b/g
Antenna
Omni Antenna (2.5 dBi) optional
Equipped
2 LAN port switch& 1 WAN port
Security
64/128bit WEP, WPA, WPA2, 802.1x and 802.11)
Media Access Protocol
CSMA/CA (Collision Avcidance) with ACK
Output Power(Average )
54M/48M/36M :23dbm max
24M/18M/12M :25dbm max.
9M/6M :27dbm max
11M/5.5M/2M/1M :27dbm max
Data Rate
11g : 54, 48, 38, 24, 18, 12, 9 and 6Mbps with auto-rate
11b : 11, 5.5, 2, and 1Mbps with auto-rate fall back
Sensitivity
54Mbps: -73dBm
11Mbps: -90dBm , 1Mbps: - 94dBm
Power adapter
12Vdc/1A-48Vdc/0.4A to power jack or CAT.5 connector
Working Mode
Ad-Hoc or Infrastructure
Throughput
22Mbps@54Mbps: 5.5Mbps@11Mbps
Operating System Support
Windows 98SE/ME/2000/XP/Vista, MAC OS 10.4.8 & Linux
800mW-Support 802.3af POE
http://astech.en.alibaba.com/product/342307905-210519681/800mW_High_Power_Wireless_AP_Router_with_802_3af_POE.html
Standard
IEEE 802.11b/g
Antenna
Omni Antenna (5 dBi)/Direction Antenna optional
Equipped
Optional 1 or 4 LAN port switch + 1 WAN port
Security
64/128bit WEP, WPA, WPA2, 802.1x and 802.11)
Media Access Protocol
CSMA/CA (Collision Avcidance) with ACK
Output Power(Average )
54M/48M/36M: 24 ± 1 dBm
24M/18M/12M: 29 ± 1 dBm.
Data Rate
11g : 54, 48, 38, 24, 18, 12, 9 and 6Mbps with auto-rate
11b : 11, 5.5, 2, and 1Mbps with auto-rate fall back
Sensitivity
54Mbps: -73dBm
11Mbps: -90dBm
Power adapter
DC Jack : 12V/1A Passive POE : 12V/1A or 45V/0.4A
Working Mode
Gate Way, Bridge, WISP
Throughput
22Mbps@54Mbps: 5.5Mbps@11Mbps
Operating System Support
Windows 98SE/ME/2000/XP/Vista, MAC OS 10.4.8 & Linux
1.Standard: IEEE 802.11g
2.Power:200mW,500mW,800mW
3.Gateway, Bridge mode
4.QoS
Indoor High Power Wireless AP Router 802.11g
FEATURES
Support Gateway, Bridge and Wireless ISP Mode
802.11b/g compliant
WEP, WPA Encryption- 64/128bit (WEP), WPA TKIP
Wireless users access control
Wireless sites survey
TCP/UDP/ICMP/ARP protocol stack
Dynamic DNS
WDS and AP+WDS
VPN Pass-through with multiple sessions
Firewall, DoS, IP/Port/MAC Filtering
Virtual DMZ
DHCP Client and Server
WAN access mode : PPPoE, PPTP, DHCP Client, Fixed IP
UPnP
QoS (per client up/down load bandwidth control)
SPECIFICATION
200mW-Support Passive POE
http://astech.en.alibaba.com/product/342087601-210519681/High_Power_Wireless_AP_Router_802_11g_200mW.html
Standard
IEEE 802.11b/g
Antenna
Omni Antenna (2.5 dBi) optional
Equipped
4 LAN port & 1 WAN port
Frequency Range
2.400GHz-2.4835GHz
Operating Frequency / Channel
2.412~2.462GHz (Canada, FCC) / 11 Channaels
2.412~2.484GHz (Japan, TELEC) / 14 Channels
2.412~2.472GHz (Euro, ETSI) / 13 Channels
Modulation Technique
Orthogonal frequency division multiplexing (OFDM)
Direct Sequence Spread Spectrum (CCK, DQPSK, DBPSK)
Security
64/128bit WEP, WPA, WPA2, 802.1x and 802.11)
Media Access Protocol
CSMA/CA (Collision Avcidance) with ACK
Output Power(Average )
54M/48M/36M :20dbm max
24M/18M/12M :23dbm max
9M/6M :23dbm max
11M/5.5M/2M/1M :23dbm max
Data Rate
11g : 54, 48, 38, 24, 18, 12, 9 and 6Mbps with auto-rate
11b : 11, 5.5, 2, and 1Mbps with auto-rate fall back
Sensitivity
54Mbps: -68dBm
11Mbps: -80dBm
Power adapter
DC 12V , 1.0A
Working Mode
Ad-Hoc or Infrastructure
Throughput
22Mbps@54Mbps: 5.5Mbps@11Mbps
Operating System Support
Windows 98SE/ME/2000/XP/Vista, MAC OS 10.4.8 & Linux
Approval
FCC Part 15 & CE
500mW-Support Passive POE
http://astech.en.alibaba.com/product/348297155-210519681/High_Power_Indoor_Wireless_AP_Router_802_11_b_g.html
Standard
IEEE 802.11b/g
Antenna
Omni Antenna (2.5 dBi) optional
Equipped
2 LAN port switch& 1 WAN port
Security
64/128bit WEP, WPA, WPA2, 802.1x and 802.11)
Media Access Protocol
CSMA/CA (Collision Avcidance) with ACK
Output Power(Average )
54M/48M/36M :23dbm max
24M/18M/12M :25dbm max.
9M/6M :27dbm max
11M/5.5M/2M/1M :27dbm max
Data Rate
11g : 54, 48, 38, 24, 18, 12, 9 and 6Mbps with auto-rate
11b : 11, 5.5, 2, and 1Mbps with auto-rate fall back
Sensitivity
54Mbps: -73dBm
11Mbps: -90dBm , 1Mbps: - 94dBm
Power adapter
12Vdc/1A-48Vdc/0.4A to power jack or CAT.5 connector
Working Mode
Ad-Hoc or Infrastructure
Throughput
22Mbps@54Mbps: 5.5Mbps@11Mbps
Operating System Support
Windows 98SE/ME/2000/XP/Vista, MAC OS 10.4.8 & Linux
800mW-Support 802.3af POE
http://astech.en.alibaba.com/product/342307905-210519681/800mW_High_Power_Wireless_AP_Router_with_802_3af_POE.html
Standard
IEEE 802.11b/g
Antenna
Omni Antenna (5 dBi)/Direction Antenna optional
Equipped
Optional 1 or 4 LAN port switch + 1 WAN port
Security
64/128bit WEP, WPA, WPA2, 802.1x and 802.11)
Media Access Protocol
CSMA/CA (Collision Avcidance) with ACK
Output Power(Average )
54M/48M/36M: 24 ± 1 dBm
24M/18M/12M: 29 ± 1 dBm.
Data Rate
11g : 54, 48, 38, 24, 18, 12, 9 and 6Mbps with auto-rate
11b : 11, 5.5, 2, and 1Mbps with auto-rate fall back
Sensitivity
54Mbps: -73dBm
11Mbps: -90dBm
Power adapter
DC Jack : 12V/1A Passive POE : 12V/1A or 45V/0.4A
Working Mode
Gate Way, Bridge, WISP
Throughput
22Mbps@54Mbps: 5.5Mbps@11Mbps
Operating System Support
Windows 98SE/ME/2000/XP/Vista, MAC OS 10.4.8 & Linux
300M wireless Router
300M wireless Router
Complies with the IEEE 802.11N standards
High data rate up to 300Mbps network speed
300M wireless Router
The AF-R300 Wireless N Router is a combined wired/wireless network connection device designed specifically for small business, office, and home office networking requirements. It complies with the IEEE 802.11n standard with wireless transmission speeds of up to 300M. The router adopts MIMO technology and has two external Antennas providing even better wireless performance, transmission rates, stability and coverage. It provides multiple security measures; supporting SSID broadcast control, MAC address access control, WEP encryption, WPA/WPA2, and WPA-PSK/WPA2-PSK authentication. This is a fashionable product with superior performance and should be your first choice when setting up a network.
Complies with the IEEE 802.11N standards
High data rate up to 300Mbps network speed
300M wireless Router
The AF-R300 Wireless N Router is a combined wired/wireless network connection device designed specifically for small business, office, and home office networking requirements. It complies with the IEEE 802.11n standard with wireless transmission speeds of up to 300M. The router adopts MIMO technology and has two external Antennas providing even better wireless performance, transmission rates, stability and coverage. It provides multiple security measures; supporting SSID broadcast control, MAC address access control, WEP encryption, WPA/WPA2, and WPA-PSK/WPA2-PSK authentication. This is a fashionable product with superior performance and should be your first choice when setting up a network.
Industrial 3G Double Card Wireless Router--SuperBee TR3000-D
1) 3G access,,Wi-Fi covered;
2) Support IPIP, PPTP, L2TP and IPsec VPN
3) Routing management, DNS NAT DHCP DMZ
4) ISO 9001
Product
TR3000-D 3G Double Card Industrial Wireless Router, design based on Advanced CDMA 2000/WCDMA/TD-SCDMA Public Wireless Network Technology, Borrow Operators’ wireless network Cover, combined Wi-Fi Wireless LAN Technology. Provide truly wireless Access platform for Enterprise, business and home users. The device using Industry-specific 3G module ,32 bit Mips high-performance embedded processor and Linux OS system, Constructs the 3G access, Wi-Fi Covered application network, Then realize wireless Data and video high-speed Stable transmission.
Feature
Professional
: Routing management, input/output configuration, Dynamic DNS, firewall , NAT, DHCP, Port mapping, DMZ, multi-ip Setting, Link backup, network condition monitoring and other senior function.
Efficient
: Support MPPC/MPPE technology; Flow management technology; Support the SNMP and customization protocol network management software, one touch reset.
Contracted
: 3G access, Wi–Fi cover, bypassing a cable network covering the complex cabling.
Safety
: Support IPIP, PPTP, L2TP and IPsec VPN etc. Function
S
table
: Provide LCP, the PPP, ICMP and Reverse ICMP level 4 link detection mechanisms.
Appearance
Basic parameters
appearance
Weight(g)
~450
Size(mm)
190×117×26
Color
Black/white
Working conditions
Rated temperature
-20°C~60°C
Rated humidity
5%~95%
Power input
DC12V/1A
Wireless interface
TD-SCDMA/CDMA2000 EVDO/WCDMA/Wi-Fi
Hardware parameters
Basic parameters
processor
MIPS32 24KEc
frequency 320MHz
FLASH
8MB NOR
SDRAM
32MB
Ethernet interface(RJ45)
10/100M Direct/ cross connected adaptive
1 WAN port
4 LAN port
Wi-Fi 802.11b/g/n
The highest support 150Mbps transmission
USB Output(Size A)
HOST
1
RS232 Output(RJ11)
Configuration port
1
Power sockets
2.1 socket
1
Antenna sockets
SMA female
2
SIM Card sockets
drawer
1
Other
Recovery factory button
State indicator
Power indicator
1
Network indicator
5
State indicator
5
Software parameters
Configuration mode
Local serial port configuration
Distal network management software configuration
IE browser configurations
Basic function
Log function
Local log and log server log function
Supports remote upgrade
Support CLI debugging
Support 2G / 3G network switch
Support external 3G network adapter and nic intelligent switching
Signal strength real-time display
Running state instructions
Routing management functions
Support static routing, can add more routing table item
Network clock synchronization
Reset function
Through external reset button or software reset recovery factory Settings
Configuration derivation function
Disconnection detection, automatic repair technology
Link and network fault when, according to the predetermined strategies redial
Multistage link testing technology
LCP link detection
PPP Heartbeat detection
Reverse ICMP,ICMP Heartbeat detection mechanism
Support network management software
Support SNMP or custom protocol network management software
Support DTU function
Serial turn Ethernet protocol
Support DTU function
Using WEB interface way, users of equipment connected network state, VPN state and network services such as the signal quality monitoring management.
Firewall
Can install multiple firewall filtering rules, can filter the IP or port.
2) Support IPIP, PPTP, L2TP and IPsec VPN
3) Routing management, DNS NAT DHCP DMZ
4) ISO 9001
Product
TR3000-D 3G Double Card Industrial Wireless Router, design based on Advanced CDMA 2000/WCDMA/TD-SCDMA Public Wireless Network Technology, Borrow Operators’ wireless network Cover, combined Wi-Fi Wireless LAN Technology. Provide truly wireless Access platform for Enterprise, business and home users. The device using Industry-specific 3G module ,32 bit Mips high-performance embedded processor and Linux OS system, Constructs the 3G access, Wi-Fi Covered application network, Then realize wireless Data and video high-speed Stable transmission.
Feature
Professional
: Routing management, input/output configuration, Dynamic DNS, firewall , NAT, DHCP, Port mapping, DMZ, multi-ip Setting, Link backup, network condition monitoring and other senior function.
Efficient
: Support MPPC/MPPE technology; Flow management technology; Support the SNMP and customization protocol network management software, one touch reset.
Contracted
: 3G access, Wi–Fi cover, bypassing a cable network covering the complex cabling.
Safety
: Support IPIP, PPTP, L2TP and IPsec VPN etc. Function
S
table
: Provide LCP, the PPP, ICMP and Reverse ICMP level 4 link detection mechanisms.
Appearance
Basic parameters
appearance
Weight(g)
~450
Size(mm)
190×117×26
Color
Black/white
Working conditions
Rated temperature
-20°C~60°C
Rated humidity
5%~95%
Power input
DC12V/1A
Wireless interface
TD-SCDMA/CDMA2000 EVDO/WCDMA/Wi-Fi
Hardware parameters
Basic parameters
processor
MIPS32 24KEc
frequency 320MHz
FLASH
8MB NOR
SDRAM
32MB
Ethernet interface(RJ45)
10/100M Direct/ cross connected adaptive
1 WAN port
4 LAN port
Wi-Fi 802.11b/g/n
The highest support 150Mbps transmission
USB Output(Size A)
HOST
1
RS232 Output(RJ11)
Configuration port
1
Power sockets
2.1 socket
1
Antenna sockets
SMA female
2
SIM Card sockets
drawer
1
Other
Recovery factory button
State indicator
Power indicator
1
Network indicator
5
State indicator
5
Software parameters
Configuration mode
Local serial port configuration
Distal network management software configuration
IE browser configurations
Basic function
Log function
Local log and log server log function
Supports remote upgrade
Support CLI debugging
Support 2G / 3G network switch
Support external 3G network adapter and nic intelligent switching
Signal strength real-time display
Running state instructions
Routing management functions
Support static routing, can add more routing table item
Network clock synchronization
Reset function
Through external reset button or software reset recovery factory Settings
Configuration derivation function
Disconnection detection, automatic repair technology
Link and network fault when, according to the predetermined strategies redial
Multistage link testing technology
LCP link detection
PPP Heartbeat detection
Reverse ICMP,ICMP Heartbeat detection mechanism
Support network management software
Support SNMP or custom protocol network management software
Support DTU function
Serial turn Ethernet protocol
Support DTU function
Using WEB interface way, users of equipment connected network state, VPN state and network services such as the signal quality monitoring management.
Firewall
Can install multiple firewall filtering rules, can filter the IP or port.
Industrial 3G Wireless Router--SuperBee TR3000M
1) 3G access,Wi-Fi covered;Mini
2) Support IPIP, PPTP, L2TP and IPsec VPN
3) Routing management, DNS NAT DHCP DMZ
4) ISO 9001
Product
TR3000 3G Single Card Industrial Wireless Router, design based on Advanced CDMA 2000/WCDMA/TD-SCDMA Public Wireless Network Technology, Borrow Operators’ wireless network Cover, combined Wi-Fi Wireless LAN Technology. Provide truly wireless Access platform for Enterprise, business and home users. The device using Industry-specific 3G module 802.11n Wi-Fi chip,32 bit Mips high-performance embedded processor and Linux OS system, Constructs the 3G access, Wi-Fi Covered application network, Then realize wireless Data and video high-speed Stable transmission.
Feature
Professional
: Routing management, input/output configuration, Dynamic DNS, firewall , NAT, DHCP, Port mapping, DMZ, multi-ip Setting, Link backup, network condition monitoring and other senior function.
Efficient
: Support MPPC/MPPE technology; Flow management technology; Support the SNMP and customization protocol network management software, one touch reset.
Contracted
: 3G access, Wi–Fi cover, bypassing a cable network covering the complex cabling.
Safety
: Support IPIP, PPTP, L2TP and IPsec VPN etc. Function
S
table
: Provide LCP, the PPP, ICMP and Reverse ICMP level 4 link detection mechanisms.
Parameter
Basic parameters
appearance
Weight(g)
~350
Size(mm)
110×86×26
Color
white
Working conditions
Rated temperature
-20°C~60°C
Rated humidity
5%~95%
Power input
DC12V/1A
Wireless interface
TD-SCDMA/CDMA2000 EVDO/WCDMA/Wi-Fi
Hardware parameters
Basic parameters
processor
MIPS32 24KEc
frequency 320MHz
FLASH
8MB NOR
SDRAM
32MB
Ethernet interface(RJ45)
10/100M Direct/ cross connected adaptive
1 WAN port
1 LAN port
Wi-Fi 802.11b/g/n
The highest support 150Mbps transmission
USB Output(Size A)
HOST
1
RS232 Output(RJ11)
Configuration port
1
Power sockets
2.1 socket
1
Antenna sockets
SMA female
2
SIM Card sockets
drawer
1
Other
Recovery factory button
State indicator
Power indicator
1
Network indicator
2
State indicator
3
Software parameters
Configuration mode
Local serial port configuration
Distal network management software configuration
IE browser configurations
Basic function
Log function
Local log and log server log function
Supports remote upgrade
Support CLI debugging
Support 2G / 3G network switch
Support external 3G network adapter and nic intelligent switching
Signal strength real-time display
Running state instructions
Routing management functions
Support static routing, can add more routing table item
Network clock synchronization
Reset function
Through external reset button or software reset recovery factory Settings
Configuration derivation function
Disconnection detection, automatic repair technology
Link and network fault when, according to the predetermined strategies redial
Multistage link testing technology
LCP link detection
PPP Heartbeat detection
Reverse ICMP,ICMP Heartbeat detection mechanism
Support network management software
Support SNMP or custom protocol network management software
Support DTU function
Serial turn Ethernet protocol
Support DTU function
Using WEB interface way, users of equipment connected network state, VPN state and network services such as the signal quality monitoring management.
Firewall
Can install multiple firewall filtering rules, can filter the IP or port.
2) Support IPIP, PPTP, L2TP and IPsec VPN
3) Routing management, DNS NAT DHCP DMZ
4) ISO 9001
Product
TR3000 3G Single Card Industrial Wireless Router, design based on Advanced CDMA 2000/WCDMA/TD-SCDMA Public Wireless Network Technology, Borrow Operators’ wireless network Cover, combined Wi-Fi Wireless LAN Technology. Provide truly wireless Access platform for Enterprise, business and home users. The device using Industry-specific 3G module 802.11n Wi-Fi chip,32 bit Mips high-performance embedded processor and Linux OS system, Constructs the 3G access, Wi-Fi Covered application network, Then realize wireless Data and video high-speed Stable transmission.
Feature
Professional
: Routing management, input/output configuration, Dynamic DNS, firewall , NAT, DHCP, Port mapping, DMZ, multi-ip Setting, Link backup, network condition monitoring and other senior function.
Efficient
: Support MPPC/MPPE technology; Flow management technology; Support the SNMP and customization protocol network management software, one touch reset.
Contracted
: 3G access, Wi–Fi cover, bypassing a cable network covering the complex cabling.
Safety
: Support IPIP, PPTP, L2TP and IPsec VPN etc. Function
S
table
: Provide LCP, the PPP, ICMP and Reverse ICMP level 4 link detection mechanisms.
Parameter
Basic parameters
appearance
Weight(g)
~350
Size(mm)
110×86×26
Color
white
Working conditions
Rated temperature
-20°C~60°C
Rated humidity
5%~95%
Power input
DC12V/1A
Wireless interface
TD-SCDMA/CDMA2000 EVDO/WCDMA/Wi-Fi
Hardware parameters
Basic parameters
processor
MIPS32 24KEc
frequency 320MHz
FLASH
8MB NOR
SDRAM
32MB
Ethernet interface(RJ45)
10/100M Direct/ cross connected adaptive
1 WAN port
1 LAN port
Wi-Fi 802.11b/g/n
The highest support 150Mbps transmission
USB Output(Size A)
HOST
1
RS232 Output(RJ11)
Configuration port
1
Power sockets
2.1 socket
1
Antenna sockets
SMA female
2
SIM Card sockets
drawer
1
Other
Recovery factory button
State indicator
Power indicator
1
Network indicator
2
State indicator
3
Software parameters
Configuration mode
Local serial port configuration
Distal network management software configuration
IE browser configurations
Basic function
Log function
Local log and log server log function
Supports remote upgrade
Support CLI debugging
Support 2G / 3G network switch
Support external 3G network adapter and nic intelligent switching
Signal strength real-time display
Running state instructions
Routing management functions
Support static routing, can add more routing table item
Network clock synchronization
Reset function
Through external reset button or software reset recovery factory Settings
Configuration derivation function
Disconnection detection, automatic repair technology
Link and network fault when, according to the predetermined strategies redial
Multistage link testing technology
LCP link detection
PPP Heartbeat detection
Reverse ICMP,ICMP Heartbeat detection mechanism
Support network management software
Support SNMP or custom protocol network management software
Support DTU function
Serial turn Ethernet protocol
Support DTU function
Using WEB interface way, users of equipment connected network state, VPN state and network services such as the signal quality monitoring management.
Firewall
Can install multiple firewall filtering rules, can filter the IP or port.
Industrial grade HSUPA ROUTER 3G HSDPA ROUTER
1.HSDPA ROUTER, 3G router, hsupa router
2.Quad-band EGSM 850/900/1800/1900MHz
3.HSUPA: 5.76Mbps/ HSDPA: 7.2M
4. VPN client
EF3423 WCDMA/HSDPA/HSUPA ROUTER SPECIFICATION
HSDPA ROUTER, 3G router, hsupa router
EF3423 WCDMA/HSDPA/HSUPA 3g wireless router adopts high-powered ARM9 CPU and embedded real time operating system.It integrates all the commonly used protocols from logical link layer to upper application layer,such as TCP/IP/UDP and so on.And it supports static and dynamic route,PPP Client and PPP server,VPN client(PPTP,L2TP,IPSEC and GRE)(only for VPN version),DHCP server and client,DDNS (dynamic DNS),firewall,NAT and DMZ host.It provides a secure,high speed,reliable wireless Internet connection for customers.This wireless router has been widely used on finance,water supply,environment protection, electric power system,post and weather fields.
A. Wireless Specification
1. UMTS/WCDMA/HSDPA/HSUPA 850/900/1900/2100MHz
2. Quad-band EGSM 850/900/1800/1900MHz
3. GPRS/EDGE CLASS 12
4. HSUPA: 5.76Mbps(UL) / HSDPA: 7.2Mbps(DL)/UMTS: 384kbps(DL/UL)
5. EDGE: 236.8kbps(DL/UL)
6. GPRS: 85.6Kbps(DL), 42.8Kbps(UL)
B. Hardware System
1. Industrial ARM9 CPU,200M
2. FLASH4MB (Extendable to 16MB)
3. SDRAM16MB (Extendable to 64MB)
4. E2PROM64KB
5. Interface:
10/100M Ethernet Port
RS232 serial port (Support RS422/RS485 if needed), rates: 110~230400bits/s
Indicator lights: Power, Online, Alarm, System, Link/ACT
Antenna interface: standard SMA female interface, 50 ohm
SIM/UIM interface: standard user card interface
Power interface: standard 3-PIN power jack
Reset button: restore the router to its original factory default settings
6. Power supply:
Standard power supply: DC 12V/1.5A
Power range: DC 5~35V
7. Wireless module:
High-powered industrial WCDMA/HSDPA/HSUPA module
8. Size:
Outline dimension: 157x97x25 mm
9. Weight: 870 g
10. Others:
Operation temperature:-25~+65ºC
Storage temperature: -40~+85ºC
Humidity: 95% (unfreezing)
C. Software function
1. Support VPN client(PPTP,L2TP,IPSEC and GRE)(only for VPN version)
2. Support auto recovery mechanism, including online detect ,auto redial when offline to make router always online
3. Support firewall and packet filter
4. Support multi protocols , such as TCP/IP,UDP,ICMP,SMTP,HTTP,POP3,OICQ,TELNET,FTP ,SNMP ,etc.
5. Support dynamic and static route
6. Support DHCP server
7. Support NAT, such as SNAT, DNAT etc.
8. Support dynamic DNS (DDNS)
9. Support DMZ host
10. Support route transmission, data communication by serial port. Support data service center management
11. Support VPDN network
12. Support WEB configure (local and remote)
13. Support telnet management and console
14. Support switch interface, Make multi terminals sharing routers wan connection
15. Support multi WAN dial method, including auto allocated IP, specifying local IP, specifying local and remote IP
16. Can be used as PPP server. Support multi authentication method, such as PAP,CHAP,CHAP-MS ,CHAP-MSV2
17. Support multi debug method, such as web, console debug and SYSLOG etc.
18. Support console upgrade firmware
19. Support TFTP upgrade firmware
20. Support multi OS, such as WINDOWS, LINUX, SCO UNIX etc.
2.Quad-band EGSM 850/900/1800/1900MHz
3.HSUPA: 5.76Mbps/ HSDPA: 7.2M
4. VPN client
EF3423 WCDMA/HSDPA/HSUPA ROUTER SPECIFICATION
HSDPA ROUTER, 3G router, hsupa router
EF3423 WCDMA/HSDPA/HSUPA 3g wireless router adopts high-powered ARM9 CPU and embedded real time operating system.It integrates all the commonly used protocols from logical link layer to upper application layer,such as TCP/IP/UDP and so on.And it supports static and dynamic route,PPP Client and PPP server,VPN client(PPTP,L2TP,IPSEC and GRE)(only for VPN version),DHCP server and client,DDNS (dynamic DNS),firewall,NAT and DMZ host.It provides a secure,high speed,reliable wireless Internet connection for customers.This wireless router has been widely used on finance,water supply,environment protection, electric power system,post and weather fields.
A. Wireless Specification
1. UMTS/WCDMA/HSDPA/HSUPA 850/900/1900/2100MHz
2. Quad-band EGSM 850/900/1800/1900MHz
3. GPRS/EDGE CLASS 12
4. HSUPA: 5.76Mbps(UL) / HSDPA: 7.2Mbps(DL)/UMTS: 384kbps(DL/UL)
5. EDGE: 236.8kbps(DL/UL)
6. GPRS: 85.6Kbps(DL), 42.8Kbps(UL)
B. Hardware System
1. Industrial ARM9 CPU,200M
2. FLASH4MB (Extendable to 16MB)
3. SDRAM16MB (Extendable to 64MB)
4. E2PROM64KB
5. Interface:
10/100M Ethernet Port
RS232 serial port (Support RS422/RS485 if needed), rates: 110~230400bits/s
Indicator lights: Power, Online, Alarm, System, Link/ACT
Antenna interface: standard SMA female interface, 50 ohm
SIM/UIM interface: standard user card interface
Power interface: standard 3-PIN power jack
Reset button: restore the router to its original factory default settings
6. Power supply:
Standard power supply: DC 12V/1.5A
Power range: DC 5~35V
7. Wireless module:
High-powered industrial WCDMA/HSDPA/HSUPA module
8. Size:
Outline dimension: 157x97x25 mm
9. Weight: 870 g
10. Others:
Operation temperature:-25~+65ºC
Storage temperature: -40~+85ºC
Humidity: 95% (unfreezing)
C. Software function
1. Support VPN client(PPTP,L2TP,IPSEC and GRE)(only for VPN version)
2. Support auto recovery mechanism, including online detect ,auto redial when offline to make router always online
3. Support firewall and packet filter
4. Support multi protocols , such as TCP/IP,UDP,ICMP,SMTP,HTTP,POP3,OICQ,TELNET,FTP ,SNMP ,etc.
5. Support dynamic and static route
6. Support DHCP server
7. Support NAT, such as SNAT, DNAT etc.
8. Support dynamic DNS (DDNS)
9. Support DMZ host
10. Support route transmission, data communication by serial port. Support data service center management
11. Support VPDN network
12. Support WEB configure (local and remote)
13. Support telnet management and console
14. Support switch interface, Make multi terminals sharing routers wan connection
15. Support multi WAN dial method, including auto allocated IP, specifying local IP, specifying local and remote IP
16. Can be used as PPP server. Support multi authentication method, such as PAP,CHAP,CHAP-MS ,CHAP-MSV2
17. Support multi debug method, such as web, console debug and SYSLOG etc.
18. Support console upgrade firmware
19. Support TFTP upgrade firmware
20. Support multi OS, such as WINDOWS, LINUX, SCO UNIX etc.
Intel IXP435 based High Speed 6 ports 1000M Gigabit Ethernet Network Router / Gateway Board / PCB
1. IXP435 Processor, 667Mhz
2. 6 x 1000M Gigabit Ethernet Port
3. MiniPCI for WiFi
4. USB for 3G
5. Gigabit Router Board
Product Highlight:
- Intel(r) IXP430 / IXP435 network processor
- 6 Gigabit Ethernet ports for WAN and LAN
- 2 High Speed USB ports to extend 3G / HSPA / 4G features
- 1 miniPCI slot for IEEE 802.11 a/b/g/n
- 2 USB 2.0 host port for NAS / 3G / WiMAX extended features
- Easy software and platform migration from Intel(r) IXP42X, IXP45X, and IXP46X based solutions
Hardware Specification:
Features
Description
Processor System
CPU
Intel® IXP430 / IXP435 network processor
Core
Intel XScale® processor
Clock Speed
400MHz / 533MHz / 667MHz
Chipset
Switch Controller
Realtek RTL8366SR 10/100/1000 Switch Controller
Realtek RTL8110S-32 Single-Chip Gigabit LOM Ethernet Controller
Memory
Type
DDR2 400MHz
Capacity
64MB / 128MB (default)
Flash
NOR Flash
8MB / 16MB (default) NOR Flash
NAND Flash
128MB NAND Flash (optional)
Wireless Communication
WiFi
1 x IEEE 802.11a/b/g/n miniPCI module (optional)
3G
Support 3G USB dongle (optional)
WiMAX
Support WiMAX USB dongle (optional)
Wired Communication
WAN
1 x 10/100/1000 Mbps Gigabit Ethernet (GE) RJ45 port
LAN
5 x 10/100/1000 Mbps Gigabit Ethernet (GE) RJ45 port
Other ports and interfaces
2 x High Speed USB 2.0 host port
1 x miniPCI type III slot
1 x RS-232 pin header
1 x JTAG connector
1 x reset button
Power Supply
DC
12V DC input, pin header
Board Dimension
190mm x 144mm
2. 6 x 1000M Gigabit Ethernet Port
3. MiniPCI for WiFi
4. USB for 3G
5. Gigabit Router Board
Product Highlight:
- Intel(r) IXP430 / IXP435 network processor
- 6 Gigabit Ethernet ports for WAN and LAN
- 2 High Speed USB ports to extend 3G / HSPA / 4G features
- 1 miniPCI slot for IEEE 802.11 a/b/g/n
- 2 USB 2.0 host port for NAS / 3G / WiMAX extended features
- Easy software and platform migration from Intel(r) IXP42X, IXP45X, and IXP46X based solutions
Hardware Specification:
Features
Description
Processor System
CPU
Intel® IXP430 / IXP435 network processor
Core
Intel XScale® processor
Clock Speed
400MHz / 533MHz / 667MHz
Chipset
Switch Controller
Realtek RTL8366SR 10/100/1000 Switch Controller
Realtek RTL8110S-32 Single-Chip Gigabit LOM Ethernet Controller
Memory
Type
DDR2 400MHz
Capacity
64MB / 128MB (default)
Flash
NOR Flash
8MB / 16MB (default) NOR Flash
NAND Flash
128MB NAND Flash (optional)
Wireless Communication
WiFi
1 x IEEE 802.11a/b/g/n miniPCI module (optional)
3G
Support 3G USB dongle (optional)
WiMAX
Support WiMAX USB dongle (optional)
Wired Communication
WAN
1 x 10/100/1000 Mbps Gigabit Ethernet (GE) RJ45 port
LAN
5 x 10/100/1000 Mbps Gigabit Ethernet (GE) RJ45 port
Other ports and interfaces
2 x High Speed USB 2.0 host port
1 x miniPCI type III slot
1 x RS-232 pin header
1 x JTAG connector
1 x reset button
Power Supply
DC
12V DC input, pin header
Board Dimension
190mm x 144mm
Intel IXP435 based Wireless 100M 1000M Ethernet / VoIP / PCI / USB Gateway / Router / Reference Board PCBA
1. IXP435 processor
2. 5 Ethernet port
3. RJ11 port for VoIP
4. miniPCI, USB
5. PCI for Gigabit extension
Product Highlights:
- Powered with Intel(r) IXP435 network processor
- 4 PCI interfaces (2 PCI slot and 2 miniPCI)
- 5 ports Ethernet (1 WAN + 4 LAN)
- 3 ports for VoIP (FXS, FXO)
- 2 ports for USB
- Support IEEE 802.11 a/b/g/n
- Support Gigabit Ethernet via PCI interface
- Easy software and platform migration from Intel(r) IXP42X, IXP45X, and IXP46X based solutions.
It is a complete-solution reference board with ample interfaces to meet your new embedded application / product design and development.
Hardware
Features
Description
Processor System
CPU
Intel® IXP435 network processor
Core
Intel XScale® processor
Clock Speed
400MHz / 533MHz / 667MHz
Chipset
Switch Controller
5 port 10/100Mbps Switch Controller
Memory
Type
DDR2 400MHz
Capacity
128MB (default) / 256MB
Flash
NOR Flash
16MB (default) / 32MB NOR Flash
NAND Flash
64MB / 128MB NAND Flash (optional)
Wireless Communication
WiFi
2 x IEEE 802.11a/b/g/n miniPCI module (optional)
3G
Support 3G USB dongle (optional)
WiMAX
Support WiMAX USB dongle (optional)
Wired Communication
WAN
1 x 10/100Mbps Fast Ethernet (FE) RJ45 port
LAN
4 x 10/100Mbps Fast Ethernet (FE) RJ45 port
Other ports and interfaces
2 x miniPCI type III slot (32-bit, 33MHz)
2 x 3.3V PCI slot (32-bit, 33MHz)
2 x High Speed USB 2.0 host port
2 x RJ11 FXS telephone port for VOIP
1 x RJ11 FXO port for PSTN
1 x RS-232 pin header
1 x JTAG debugger and emulator interface
Power Supply
DC
12V DC input, 1.5A
Board Dimension
201mm x 142mm
2. 5 Ethernet port
3. RJ11 port for VoIP
4. miniPCI, USB
5. PCI for Gigabit extension
Product Highlights:
- Powered with Intel(r) IXP435 network processor
- 4 PCI interfaces (2 PCI slot and 2 miniPCI)
- 5 ports Ethernet (1 WAN + 4 LAN)
- 3 ports for VoIP (FXS, FXO)
- 2 ports for USB
- Support IEEE 802.11 a/b/g/n
- Support Gigabit Ethernet via PCI interface
- Easy software and platform migration from Intel(r) IXP42X, IXP45X, and IXP46X based solutions.
It is a complete-solution reference board with ample interfaces to meet your new embedded application / product design and development.
Hardware
Features
Description
Processor System
CPU
Intel® IXP435 network processor
Core
Intel XScale® processor
Clock Speed
400MHz / 533MHz / 667MHz
Chipset
Switch Controller
5 port 10/100Mbps Switch Controller
Memory
Type
DDR2 400MHz
Capacity
128MB (default) / 256MB
Flash
NOR Flash
16MB (default) / 32MB NOR Flash
NAND Flash
64MB / 128MB NAND Flash (optional)
Wireless Communication
WiFi
2 x IEEE 802.11a/b/g/n miniPCI module (optional)
3G
Support 3G USB dongle (optional)
WiMAX
Support WiMAX USB dongle (optional)
Wired Communication
WAN
1 x 10/100Mbps Fast Ethernet (FE) RJ45 port
LAN
4 x 10/100Mbps Fast Ethernet (FE) RJ45 port
Other ports and interfaces
2 x miniPCI type III slot (32-bit, 33MHz)
2 x 3.3V PCI slot (32-bit, 33MHz)
2 x High Speed USB 2.0 host port
2 x RJ11 FXS telephone port for VOIP
1 x RJ11 FXO port for PSTN
1 x RS-232 pin header
1 x JTAG debugger and emulator interface
Power Supply
DC
12V DC input, 1.5A
Board Dimension
201mm x 142mm
Friday, August 12, 2011
Internal 3G WIFI Router
Internal 3G WIFI Router
1)HSUPA/HSDPA/UMTS 2100MHz
2)128MB Flash, 64MB RAM
3)WiFi: 802.11.b/g/N
4)Black Whit Red Yellow
Internal 3G WIFI Router
This Internal 3G Wi-Fi Router is just like a cellphone,and it is only 90g(witnin battery),you can just put it in your pocket!The fast frequency,HSUPA/HSDPA/UMTS 2100MHz,to make sure that the running fluently.
Go ahead,and take it!
Specifications:
Operating frequency(3G): HSUPA/HSDPA/UMTS 2100MHz
Operating frequency(2G): GSM/GPRS/EDGE 850/900/1800/1900MHz
Speed: HSUPA 5.76Mbps; HSDPA 7.2Mbps
Dimensions: 95mm × 48mm × 13mm
Weight: 90g(including the battery)
Receive Diversity: HSUPA/HSDPA/UMTS 2100MHz
LED: LED
Battery: 1150 mAH, Maximum working time: 3.5 hours, Maximum standby time: 100 hours
Micro SD card slot: Yes (Up to 32GB)
Internal Memory: 128MB Flash, 64MB RAM
UIM: ROM-UIM and R-UIM
WiFi: 802.11.b/g/N
Encryption: WEP, WPA, WPA2
OS: Windows XP, Vista, Windows 7; Mac OS X 10.4, 10.5 and 10.6 with latest upgrades
The photoes:
Package contain
:
1*3G wifi router
1*battery
1*product specification
1*warranty bill
welcome to inquire the further information
1)HSUPA/HSDPA/UMTS 2100MHz
2)128MB Flash, 64MB RAM
3)WiFi: 802.11.b/g/N
4)Black Whit Red Yellow
Internal 3G WIFI Router
This Internal 3G Wi-Fi Router is just like a cellphone,and it is only 90g(witnin battery),you can just put it in your pocket!The fast frequency,HSUPA/HSDPA/UMTS 2100MHz,to make sure that the running fluently.
Go ahead,and take it!
Specifications:
Operating frequency(3G): HSUPA/HSDPA/UMTS 2100MHz
Operating frequency(2G): GSM/GPRS/EDGE 850/900/1800/1900MHz
Speed: HSUPA 5.76Mbps; HSDPA 7.2Mbps
Dimensions: 95mm × 48mm × 13mm
Weight: 90g(including the battery)
Receive Diversity: HSUPA/HSDPA/UMTS 2100MHz
LED: LED
Battery: 1150 mAH, Maximum working time: 3.5 hours, Maximum standby time: 100 hours
Micro SD card slot: Yes (Up to 32GB)
Internal Memory: 128MB Flash, 64MB RAM
UIM: ROM-UIM and R-UIM
WiFi: 802.11.b/g/N
Encryption: WEP, WPA, WPA2
OS: Windows XP, Vista, Windows 7; Mac OS X 10.4, 10.5 and 10.6 with latest upgrades
The photoes:
Package contain
:
1*3G wifi router
1*battery
1*product specification
1*warranty bill
welcome to inquire the further information
Internal USB Wifi Router
Original ZTE AC30+ 3g WiFi Router
HSUPA/HSDPA/UMTS 2100MHz
EDGE/GPRS/GSM 1900/1800/900(850)MHz
EVDO Rev.A 800/2100mhz
ZTE AC 30 Wifi Hotspot
Provide Indoor Coverage
Support 5 Wi-Fi access Radio
ZTE AC30 is a 2G/3G Wi-Fi device, working in GSM/GPRS/EDGE/WCDMA/EV-DO/HSPA network. The client devices could connect to it via USB or Wi-Fi interface. The device supports data and SMS services, enabling you to communicate anytime and anywhere.
Specification:
* HSUPA/HSDPA/UMTS 2100MHz
* EDGE/GPRS/GSM 1900/1800/900(850)MHz
* EVDO Rev.A 800/2100 MHz
* WiFi 802.11b/g
* Wi-Fi Standard 802.11b/g
* Wi-Fi Security WEP/WPA/WPA2
* USB 2.0 HIGH SPEED
* Speed(WCDMA) download :7.2Mbps upload:5.76Mbps
* Speed(EVDO) download:3.1Mbps upload:1.8Mbps
* Dimension: 99mm × 53mm × 14mm
* Weight 80g
* Operating system Windows 7, Windows Vista(32bit or 64bit), Windows XP (SP3 or later), MAC(10.4 or later)
* Web Browser: IE (7.0 or later), Firefox (3.0 or later), Opera (10.0 or later), Safari (4.0 or later), Chrome (5.0 or later)
Battery:
* Power Adapter 5V/700mA
* Battery capacity 1500mAh
* Working time About 4hours
* Standby time About 100hours
Notes: The standby and working time of ZTE AC30 3G Router are only for your reference. They are based on the ideal working environment.
Temperature:
* Operating temperature: -10°C ~ +60°C
* Storage temperature -20°C ~ +50°C
* Charging temperature 0°C ~ +45°C
HSUPA/HSDPA/UMTS 2100MHz
EDGE/GPRS/GSM 1900/1800/900(850)MHz
EVDO Rev.A 800/2100mhz
ZTE AC 30 Wifi Hotspot
Provide Indoor Coverage
Support 5 Wi-Fi access Radio
ZTE AC30 is a 2G/3G Wi-Fi device, working in GSM/GPRS/EDGE/WCDMA/EV-DO/HSPA network. The client devices could connect to it via USB or Wi-Fi interface. The device supports data and SMS services, enabling you to communicate anytime and anywhere.
Specification:
* HSUPA/HSDPA/UMTS 2100MHz
* EDGE/GPRS/GSM 1900/1800/900(850)MHz
* EVDO Rev.A 800/2100 MHz
* WiFi 802.11b/g
* Wi-Fi Standard 802.11b/g
* Wi-Fi Security WEP/WPA/WPA2
* USB 2.0 HIGH SPEED
* Speed(WCDMA) download :7.2Mbps upload:5.76Mbps
* Speed(EVDO) download:3.1Mbps upload:1.8Mbps
* Dimension: 99mm × 53mm × 14mm
* Weight 80g
* Operating system Windows 7, Windows Vista(32bit or 64bit), Windows XP (SP3 or later), MAC(10.4 or later)
* Web Browser: IE (7.0 or later), Firefox (3.0 or later), Opera (10.0 or later), Safari (4.0 or later), Chrome (5.0 or later)
Battery:
* Power Adapter 5V/700mA
* Battery capacity 1500mAh
* Working time About 4hours
* Standby time About 100hours
Notes: The standby and working time of ZTE AC30 3G Router are only for your reference. They are based on the ideal working environment.
Temperature:
* Operating temperature: -10°C ~ +60°C
* Storage temperature -20°C ~ +50°C
* Charging temperature 0°C ~ +45°C
Ipioneer CNC router 1212DS
CNC woodworking machine
1.CNC router with high quality
2.we also can customize your order,just please tell me your demands.
Features:
More advanced DSP digit-control system, handle operation and large liquid crystal display brings out more convenient operation, simpler maintenance and bestows much more human nature on the design of the machine.
Unique intelligent calculation fully develops the potential of the electric machinery and leads to high speed processing, the synchronization of curves and straight lines, smoother curves and race speed at 12m/min.
Unique and dynamic renewal of the system enables the customer, according to different processing requirements, to change the controlling ability of the system and therefore, effectively improves the processing efficiency.
Large internal memory capacity of 32M is able to store three processing files simultaneously and open and process any of them.
Connection with the computer via USB interface enables data to be transmitted in a second, supports hot plug and play, no driver installation required(Window98/NT/2000/XP).
More compatible: It is compatible with such CAD/CAM software like type3/artcam/castmate/proe/UG/Artcut etc.
Excellent two-bolt lead screw made in Germany and line slideways made in Japan.
The spindle with high power and frequency conversion enables the machine to cut plexiglass of 20-30mm thick in one cut mainly applied in carving and cutting of PVC, polyether methacrylate, aluminum plastic board, waterproof board and aluminum alloy etc.
It is able to go on engraving when the electricity is cut or the tool is broken.
Technical Specifications
Parameters
Model
Pioneer-
1212DS
Working area
1550x1320mm
Travel of engraving (xyz)
1200x1200x90mm
Maximum running speed
9000mm/min
Maximum engraving speed
6000mm/min
Engraving Spindle
1500W inverter (Optional 2200w,3000w)
Collet Cutter
Φ6, Φ3.175
Speed of main spindle
6000-24000rpm
Interface
USB
Capacity of memory
32M
X, Y, Z traveling positioning accuracy
±0.03/300mm
X,Y, Z repositioning positioning accuracy
±0.05mm
X-Y-Z working accuracy
<0.01mm
X-Y-Z structure
German ball screw shaft linear bearings
Drive motors
Stepper
Format of Instructions
G code or HPGL
Power source
DC220V/±10% 50HZ Single Ph
Power consumption
600W
Operating environment
Temperature: +5-+35,relative humidty30%-70%
Dimension
1650mmx1650mmx1250mm
Gross weight
380KG
1.CNC router with high quality
2.we also can customize your order,just please tell me your demands.
Features:
More advanced DSP digit-control system, handle operation and large liquid crystal display brings out more convenient operation, simpler maintenance and bestows much more human nature on the design of the machine.
Unique intelligent calculation fully develops the potential of the electric machinery and leads to high speed processing, the synchronization of curves and straight lines, smoother curves and race speed at 12m/min.
Unique and dynamic renewal of the system enables the customer, according to different processing requirements, to change the controlling ability of the system and therefore, effectively improves the processing efficiency.
Large internal memory capacity of 32M is able to store three processing files simultaneously and open and process any of them.
Connection with the computer via USB interface enables data to be transmitted in a second, supports hot plug and play, no driver installation required(Window98/NT/2000/XP).
More compatible: It is compatible with such CAD/CAM software like type3/artcam/castmate/proe/UG/Artcut etc.
Excellent two-bolt lead screw made in Germany and line slideways made in Japan.
The spindle with high power and frequency conversion enables the machine to cut plexiglass of 20-30mm thick in one cut mainly applied in carving and cutting of PVC, polyether methacrylate, aluminum plastic board, waterproof board and aluminum alloy etc.
It is able to go on engraving when the electricity is cut or the tool is broken.
Technical Specifications
Parameters
Model
Pioneer-
1212DS
Working area
1550x1320mm
Travel of engraving (xyz)
1200x1200x90mm
Maximum running speed
9000mm/min
Maximum engraving speed
6000mm/min
Engraving Spindle
1500W inverter (Optional 2200w,3000w)
Collet Cutter
Φ6, Φ3.175
Speed of main spindle
6000-24000rpm
Interface
USB
Capacity of memory
32M
X, Y, Z traveling positioning accuracy
±0.03/300mm
X,Y, Z repositioning positioning accuracy
±0.05mm
X-Y-Z working accuracy
<0.01mm
X-Y-Z structure
German ball screw shaft linear bearings
Drive motors
Stepper
Format of Instructions
G code or HPGL
Power source
DC220V/±10% 50HZ Single Ph
Power consumption
600W
Operating environment
Temperature: +5-+35,relative humidty30%-70%
Dimension
1650mmx1650mmx1250mm
Gross weight
380KG
Ipioneer CNC router 1318DS
CNC woodworking machine
1.CNC router with high quality
2.Vacuum table and dust collector
3.Four spindle
4.competitive price
Features:
More advanced DSP digit-control system, handle operation and large liquid crystal display brings out more convenient operation, simpler maintenance and bestows much more human nature on the design of the machine.
Unique intelligent calculation fully develops the potential of the electric machinery and leads to high speed processing, the synchronization of curves and straight lines, smoother curves and race speed at 12m/min.
Unique and dynamic renewal of the system enables the customer, according to different processing requirements, to change the controlling ability of the system and therefore, effectively improves the processing efficiency.
Large internal memory capacity of 32M is able to store three processing files simultaneously and open and process any of them.
Connection with the computer via USB interface enables data to be transmitted in a second, supports hot plug and play, no driver installation required(Window98/NT/2000/XP).
More compatible: It is compatible with such CAD/CAM software like type3/artcam/castmate/proe/UG/Artcut etc.
Excellent two-bolt lead screw made in Germany and line slideways made in Japan.
The spindle with high power and frequency conversion enables the machine to cut plexiglass of 20-30mm thick in one cut mainly applied in carving and cutting of PVC, polyether methacrylate, aluminum plastic board, waterproof board and aluminum alloy etc.
It is able to go on engraving when the electricity is cut or the tool is broken.
Optional: Vacuum Bed: 2300USD Extractor: 450USD
Technical Specifications
Parameters
Model
Pioneer
-1318DS
Working area
2200x1440mm
Travel of engraving (xyz)
1800x1300x100mm
Maximum running speed
12000mm/min
Engraving Spindle
1500W
inverter (Optional 2200w,3000w)
Collet Cutter
Φ6, Φ3.175
Speed of main spindle
6000-24000rpm
Interface
USB
Capacity of memory
32M
X, Y, Z traveling positioning accuracy
±0.03/300mm
X,Y, Z repositioning positioning accuracy
±0.05mm
X-Y-Z working accuracy
<0.01mm
X-Y-Z structure
German ball screw shaft linear bearings
Drive motors
Stepper
Format of Instructions
G code or HPGL
Power source
DC220V/±10% 50HZ Single Ph
Power consumption
1200W
perating environment
Temperature: +5-+35,relative humidty30%-70%
Gross weight
650KG
1.CNC router with high quality
2.Vacuum table and dust collector
3.Four spindle
4.competitive price
Features:
More advanced DSP digit-control system, handle operation and large liquid crystal display brings out more convenient operation, simpler maintenance and bestows much more human nature on the design of the machine.
Unique intelligent calculation fully develops the potential of the electric machinery and leads to high speed processing, the synchronization of curves and straight lines, smoother curves and race speed at 12m/min.
Unique and dynamic renewal of the system enables the customer, according to different processing requirements, to change the controlling ability of the system and therefore, effectively improves the processing efficiency.
Large internal memory capacity of 32M is able to store three processing files simultaneously and open and process any of them.
Connection with the computer via USB interface enables data to be transmitted in a second, supports hot plug and play, no driver installation required(Window98/NT/2000/XP).
More compatible: It is compatible with such CAD/CAM software like type3/artcam/castmate/proe/UG/Artcut etc.
Excellent two-bolt lead screw made in Germany and line slideways made in Japan.
The spindle with high power and frequency conversion enables the machine to cut plexiglass of 20-30mm thick in one cut mainly applied in carving and cutting of PVC, polyether methacrylate, aluminum plastic board, waterproof board and aluminum alloy etc.
It is able to go on engraving when the electricity is cut or the tool is broken.
Optional: Vacuum Bed: 2300USD Extractor: 450USD
Technical Specifications
Parameters
Model
Pioneer
-1318DS
Working area
2200x1440mm
Travel of engraving (xyz)
1800x1300x100mm
Maximum running speed
12000mm/min
Engraving Spindle
1500W
inverter (Optional 2200w,3000w)
Collet Cutter
Φ6, Φ3.175
Speed of main spindle
6000-24000rpm
Interface
USB
Capacity of memory
32M
X, Y, Z traveling positioning accuracy
±0.03/300mm
X,Y, Z repositioning positioning accuracy
±0.05mm
X-Y-Z working accuracy
<0.01mm
X-Y-Z structure
German ball screw shaft linear bearings
Drive motors
Stepper
Format of Instructions
G code or HPGL
Power source
DC220V/±10% 50HZ Single Ph
Power consumption
1200W
perating environment
Temperature: +5-+35,relative humidty30%-70%
Gross weight
650KG
Ipioneer CNC router 1325DS
CNC woodworking machine
1.CNC router with high quality
2.Vacuum table and dust collector
3.Four spindle
4.competitive price
Parameters
Model
Pioneer-1325DS
Working area
2900x1440mm
Travel of engraving (xyz)
2500x1300x90mm
Maximum Engraving speed
8000mm/min
Engraving Spindle
2200W inverter
Collet Cutter
Φ6, Φ3.175
Speed of main spindle
6000-24000rpm
Interface
USB
Capacity of memory
32M
X, Y, Z traveling positioning accuracy
±0.03/300mm
X,Y, Z repositioning positioning accuracy
±0.05mm
X-Y-Z working accuracy
<0.01mm
X-Y-Z structure
German ball screw shaft linear bearings
Drive motors
Stepper
Format of Instructions
G code or HPGL
Power source
DC220V/±10% 50HZ
Power consumption
1200W
Operating environment
Temperature: +5-+35,relative humidty30%-70%
Gross weight
1200KG
1.CNC router with high quality
2.Vacuum table and dust collector
3.Four spindle
4.competitive price
Parameters
Model
Pioneer-1325DS
Working area
2900x1440mm
Travel of engraving (xyz)
2500x1300x90mm
Maximum Engraving speed
8000mm/min
Engraving Spindle
2200W inverter
Collet Cutter
Φ6, Φ3.175
Speed of main spindle
6000-24000rpm
Interface
USB
Capacity of memory
32M
X, Y, Z traveling positioning accuracy
±0.03/300mm
X,Y, Z repositioning positioning accuracy
±0.05mm
X-Y-Z working accuracy
<0.01mm
X-Y-Z structure
German ball screw shaft linear bearings
Drive motors
Stepper
Format of Instructions
G code or HPGL
Power source
DC220V/±10% 50HZ
Power consumption
1200W
Operating environment
Temperature: +5-+35,relative humidty30%-70%
Gross weight
1200KG
100% unlock 3G Mifi Router Huawei E585
- HuaWei E585
- 3G router,3g wifi router,hsdpa router
- Wi-Fi speed rate up to 150Mbp
3G Mifi Wireless Router HuaWei E585
100% Brand new,HuaWei Genius Product
With Original Packing!
Windows 7, Vista, XP, 2000, Mac OS Supported
100% Unlocked & Work Worldwide With Data Network:
HSDPA/UMTS 2100MHz
GSM/GPRS/EDGE 850/900/1800/1900MHz
Stock Ready to ship or Self Collect Immediately!
1 Year Warranty
- 3G router,3g wifi router,hsdpa router
- Wi-Fi speed rate up to 150Mbp
3G Mifi Wireless Router HuaWei E585
100% Brand new,HuaWei Genius Product
With Original Packing!
Windows 7, Vista, XP, 2000, Mac OS Supported
100% Unlocked & Work Worldwide With Data Network:
HSDPA/UMTS 2100MHz
GSM/GPRS/EDGE 850/900/1800/1900MHz
Stock Ready to ship or Self Collect Immediately!
1 Year Warranty
300M wireless router 11N
Network standard IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
300M wireless router
main chipset : RT3052
Network standard IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Data transfer rate of 150Mbps
Frequency range 2.4-2.4835GHz
Channel number 13
Modulation DBPSK, DQPSK, CCK, OFDM ,16-QAM ,64-QAM
Network protocol support for CSMA / CA, CSMA, TCP / IP, DHCP, ICMP, NAT, PPPoE
Sensitivity 270M:-68dBm @ 10% PER, 130M:-68dBm @ 10% PER, 108M:-68dBm @ 10% PER, 54M:-68dBm @ 10% PER,
11M:-85dBm @ 8% PER, 6M:-88dBm @ 10% PER, 1M:-90dBm @ 8% PER
Two fixed antennas omni-directional antenna, antenna gain: 3dBi
Network Interface 1 WAN port, four LAN port
WEB-wide network management Chinese management interface, support for free software upgrades WEB
The provision of security 64/128/152 bit WEP encryption, support for WPA / WPA-PSK, WPA2/WPA2-PSK security mechanism
Status indicators per port: Link / Act (port to connect / work), other: PWR (power), SYS (system instructions), WLAN (wireless status indication)
Environmental standard operating temperature: 0oC-40oC, Storage temperature:-40oC-70oC, Humidity: 10% -90% RH non-condensing, storage humidity: 5% -90% RH non-condensing
Size 200 × 140 × 28mm
Other technical parameters set wired / wireless network connection in one
11N using advanced wireless technology
Wireless transfer rate up to 150M
Support for IP bandwidth control, a rational allocation of network bandwidth
WPS security settings of a button, simplifying the process of wireless encryption
Channel 20/40MHz coexistence, so that to enhance the performance of double
Control functions with parents, manage their children's online content and time
300M wireless router
main chipset : RT3052
Network standard IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Data transfer rate of 150Mbps
Frequency range 2.4-2.4835GHz
Channel number 13
Modulation DBPSK, DQPSK, CCK, OFDM ,16-QAM ,64-QAM
Network protocol support for CSMA / CA, CSMA, TCP / IP, DHCP, ICMP, NAT, PPPoE
Sensitivity 270M:-68dBm @ 10% PER, 130M:-68dBm @ 10% PER, 108M:-68dBm @ 10% PER, 54M:-68dBm @ 10% PER,
11M:-85dBm @ 8% PER, 6M:-88dBm @ 10% PER, 1M:-90dBm @ 8% PER
Two fixed antennas omni-directional antenna, antenna gain: 3dBi
Network Interface 1 WAN port, four LAN port
WEB-wide network management Chinese management interface, support for free software upgrades WEB
The provision of security 64/128/152 bit WEP encryption, support for WPA / WPA-PSK, WPA2/WPA2-PSK security mechanism
Status indicators per port: Link / Act (port to connect / work), other: PWR (power), SYS (system instructions), WLAN (wireless status indication)
Environmental standard operating temperature: 0oC-40oC, Storage temperature:-40oC-70oC, Humidity: 10% -90% RH non-condensing, storage humidity: 5% -90% RH non-condensing
Size 200 × 140 × 28mm
Other technical parameters set wired / wireless network connection in one
11N using advanced wireless technology
Wireless transfer rate up to 150M
Support for IP bandwidth control, a rational allocation of network bandwidth
WPS security settings of a button, simplifying the process of wireless encryption
Channel 20/40MHz coexistence, so that to enhance the performance of double
Control functions with parents, manage their children's online content and time
Ipioneer CNC router 7090DS
CNC woodworking machine
1.CNC router with high quality
2.Vacuum table and dust collector
3.Four spindle
4.competitive price
More advanced DSP digit-control system, handle operation and large liquid crystal display brings out more convenient operation, simpler maintenance and bestows much more human nature on the design of the machine.
Unique intelligent calculation fully develops the potential of the electric machinery and leads to high speed processing, the synchronization of curves and straight lines, smoother curves and race speed at 12m/min.
Unique and dynamic renewal of the system enables the customer, according to different processing requirements, to change the controlling ability of the system and therefore, effectively improves the processing efficiency.
Large internal memory capacity of 32M is able to store three processing files simultaneously and open and process any of them.
Connection with the computer via USB interface enables data to be transmitted in a second, supports hot plug and play, no driver installation required(Window98/NT/2000/XP).
More compatible: It is compatible with such CAD/CAM software like type3/artcam/castmate/proe/UG/Artcut etc.
Excellent two-bolt ball screw made in Germany and line slideways made in Japan or Korea.
The spindle with high power and frequency conversion enables the machine to cut plexiglass of 20-30mm thick in one cut mainly applied in carving and cutting of PVC, polyether methacrylate, aluminum plastic board, waterproof board and aluminum alloy etc.
It is able to go on engraving when the electricity is cut or the tool is broken.
Technical Specifications
Parameters
Model
Pioneer
7090DS
Working area
1100x800mm
Travel of engraving (xyz)
900x700x70mm
Maximum running speed
9000mm/min
Maximum engraving speed
6000mm/min
Engraving Spindle
1200W
inverter
Collet Cutter
Φ6, Φ3.175
Speed of main spindle
6000-24000rpm
Interface
USB
Capacity of memory
32M
X, Y, Z traveling positioning accuracy
±0.03/300mm
X,Y, Z repositioning positioning accuracy
±0.05mm
X-Y-Z working accuracy
<0.01mm
X-Y-Z structure
German ball screw shaft linear bearings
Drive motors
Stepper
Format of Instructions
G code or HPGL
Power source
DC220V/±10% 50HZ Single Ph
Power consumption
400W
Operating environment
Temperature: +5-+35,relative humidty30%-70%
Dimension
925mmx1280mmx1240mm
Weight
350KG
1.CNC router with high quality
2.Vacuum table and dust collector
3.Four spindle
4.competitive price
More advanced DSP digit-control system, handle operation and large liquid crystal display brings out more convenient operation, simpler maintenance and bestows much more human nature on the design of the machine.
Unique intelligent calculation fully develops the potential of the electric machinery and leads to high speed processing, the synchronization of curves and straight lines, smoother curves and race speed at 12m/min.
Unique and dynamic renewal of the system enables the customer, according to different processing requirements, to change the controlling ability of the system and therefore, effectively improves the processing efficiency.
Large internal memory capacity of 32M is able to store three processing files simultaneously and open and process any of them.
Connection with the computer via USB interface enables data to be transmitted in a second, supports hot plug and play, no driver installation required(Window98/NT/2000/XP).
More compatible: It is compatible with such CAD/CAM software like type3/artcam/castmate/proe/UG/Artcut etc.
Excellent two-bolt ball screw made in Germany and line slideways made in Japan or Korea.
The spindle with high power and frequency conversion enables the machine to cut plexiglass of 20-30mm thick in one cut mainly applied in carving and cutting of PVC, polyether methacrylate, aluminum plastic board, waterproof board and aluminum alloy etc.
It is able to go on engraving when the electricity is cut or the tool is broken.
Technical Specifications
Parameters
Model
Pioneer
7090DS
Working area
1100x800mm
Travel of engraving (xyz)
900x700x70mm
Maximum running speed
9000mm/min
Maximum engraving speed
6000mm/min
Engraving Spindle
1200W
inverter
Collet Cutter
Φ6, Φ3.175
Speed of main spindle
6000-24000rpm
Interface
USB
Capacity of memory
32M
X, Y, Z traveling positioning accuracy
±0.03/300mm
X,Y, Z repositioning positioning accuracy
±0.05mm
X-Y-Z working accuracy
<0.01mm
X-Y-Z structure
German ball screw shaft linear bearings
Drive motors
Stepper
Format of Instructions
G code or HPGL
Power source
DC220V/±10% 50HZ Single Ph
Power consumption
400W
Operating environment
Temperature: +5-+35,relative humidty30%-70%
Dimension
925mmx1280mmx1240mm
Weight
350KG
J30 CNC WOOD ROUTER
ULI-J30 cnc wood router
1)xyz:1500*3000*150mm
2)table size:1620*3300mm
3)spindle power:4Kw
ULI-J30 cnc wood router
Features:
1.Adopting high precision AMT guideway and double rows ball bearing. High bearing capacity, life long service, stable operation.
2.X, Y axis adopt rack transmision, Z axis adopts ball screw transmission.
3.Adopting overall steel structure, through tempering stress removal and twice precision maching to effectively ensure high precision and durable.
4.The performance is fine engraving, smooth botom, and clear outline.
5.Adopting 7.5KW vacuum pump, cavity vacuum table with line absorption, vacuum fixture.
Technical Parameters
J25
J30
J50
Working Area
X Axis
1300mm
1500mm
2000mm
Y Axis
2500mm
3000mm
5000mm
Z Axis
150mm
150mm
150mm
Table Size
X-Y
1420*2800mm
1620*3300mm
2120*5300mm
Spindle Motor
Spindle Power
4KW/6KW constant power inverter spindle motor,air-cooled or water-cooled
Spindle Rotary Speed
0-24000 r/min
Mechanical
Structure
Work Table
Vacuum Table
Transmission
X,Y axis adopt rack, Z axis adopts high precision ball screw
Accuracy
Processing Accuracy
0.02mm
Repeat Positioning Accuracy
0.04mm
Speed
Max Moving Speed
Stepper: 25m/min, Servo: 45m/min
Max Working Speed
20m/min
Vacuum
Table
Vacuum Pump
7.5KW
7.5KW
15KW
1)xyz:1500*3000*150mm
2)table size:1620*3300mm
3)spindle power:4Kw
ULI-J30 cnc wood router
Features:
1.Adopting high precision AMT guideway and double rows ball bearing. High bearing capacity, life long service, stable operation.
2.X, Y axis adopt rack transmision, Z axis adopts ball screw transmission.
3.Adopting overall steel structure, through tempering stress removal and twice precision maching to effectively ensure high precision and durable.
4.The performance is fine engraving, smooth botom, and clear outline.
5.Adopting 7.5KW vacuum pump, cavity vacuum table with line absorption, vacuum fixture.
Technical Parameters
J25
J30
J50
Working Area
X Axis
1300mm
1500mm
2000mm
Y Axis
2500mm
3000mm
5000mm
Z Axis
150mm
150mm
150mm
Table Size
X-Y
1420*2800mm
1620*3300mm
2120*5300mm
Spindle Motor
Spindle Power
4KW/6KW constant power inverter spindle motor,air-cooled or water-cooled
Spindle Rotary Speed
0-24000 r/min
Mechanical
Structure
Work Table
Vacuum Table
Transmission
X,Y axis adopt rack, Z axis adopts high precision ball screw
Accuracy
Processing Accuracy
0.02mm
Repeat Positioning Accuracy
0.04mm
Speed
Max Moving Speed
Stepper: 25m/min, Servo: 45m/min
Max Working Speed
20m/min
Vacuum
Table
Vacuum Pump
7.5KW
7.5KW
15KW
JB-C1325 automatic tool changer cnc router in sales promotion
automatic tool changer cnc router
1 Strong structure, stable and smooth movement
2 English video
3 High efficiency
automatic tool changer cnc router
Machine Features
The famous brand high power wind-cooling spindle which imported from Italy. Italy HSD spindle
Adopts the imported strait line square contrail, double line and 4list block, high bearing strength, stable running, high precision, high intention and high quality steel contrail, guarantee the mechanic precision and the abrasive resistance. The life time is 10times the machines with the round contrail. The knife is also with high precision. Using the Taiwanbaoyuan controlling system with high performance
Using imported transducer and servo-drive and motor imported from Japan, the electric parts of Siemens.
All the spare parts of the machine adopt the international advanced parts. Special automatic knife changing data control function, the position of the knife head can be adjusted automatically, automatic knife adjust system.
Using Germany original vacuum absorption and no oil vacuum pump
The driving system adopts JapaneseYaskama servo engine with high control precision.
Capacity protect working table: avoid destroy the table because false operation or the false software. Capacity process over area protection: avoid the mechaniccollide because of the design area goes over the working area.
Using the Taiwanbaoyuan controlling system with high performance. Advanced DSP control handle, control the automatic multi- faced 3D process. It can process the 3- dimentional process, engrave or cut, able to work offline.
The structure is steel jointing, stable and without distortion. Fixed working table and can process the materials on the table freely.
The compatibility of the software is good, it can compatible the CAD/CAM design software such as type3/Artcam/Castmate and Wentai. It is suitable for the manufacture of many materia
Automatic tool-change systems like a bamboo hat, which can contain 8 knives, only need 10 seconds the tool can be changed. It has special knife table for focusing that can make up the error of the knives’ length.
Suitable fields:
Wooden industry: the process of the wave board, cabinet door, wooden door, artistic door, no-painting door, screen, process of the artistic window, shoes cleaning machine, cabinet of the play machine, mahjong table, computer board and furnishing.
Advertising industry: Advertising board, the design of the signs, the cutting of the acrylic, plastic absorb, the design of the multi-material decoration product.
Model industry: Can engrave on the steel model such as copper, aluminum, iron etc, Nonmetal materials such as man-made marble, sand, plastic board, PVC tube, wood board
Other fields: Can engrave many big embossments, widely used in the artistic field.
Technology Parameter:
Table area
1300*2500mm
Feed-in height
200-400mm
Resolution ratio
0.025mm
Spindle power
8KW(ItalyHSD)
Work voltage
AC380V/50Hz
Operating speed
80m/min
Spindle rotating speed
24000rpm/min
Cutter diameter
3.175 4 6 12.7
Command code
G code.uoo.mmg.plt
Adsorb power
5.5KW
Cutter control pressure
0.7Kpa
Cooling system
Italy cooling
Work mode
AC servo
Table
Vacuum table
Processor DSP
100MHZ
Interface
USB
1 Strong structure, stable and smooth movement
2 English video
3 High efficiency
automatic tool changer cnc router
Machine Features
The famous brand high power wind-cooling spindle which imported from Italy. Italy HSD spindle
Adopts the imported strait line square contrail, double line and 4list block, high bearing strength, stable running, high precision, high intention and high quality steel contrail, guarantee the mechanic precision and the abrasive resistance. The life time is 10times the machines with the round contrail. The knife is also with high precision. Using the Taiwanbaoyuan controlling system with high performance
Using imported transducer and servo-drive and motor imported from Japan, the electric parts of Siemens.
All the spare parts of the machine adopt the international advanced parts. Special automatic knife changing data control function, the position of the knife head can be adjusted automatically, automatic knife adjust system.
Using Germany original vacuum absorption and no oil vacuum pump
The driving system adopts JapaneseYaskama servo engine with high control precision.
Capacity protect working table: avoid destroy the table because false operation or the false software. Capacity process over area protection: avoid the mechaniccollide because of the design area goes over the working area.
Using the Taiwanbaoyuan controlling system with high performance. Advanced DSP control handle, control the automatic multi- faced 3D process. It can process the 3- dimentional process, engrave or cut, able to work offline.
The structure is steel jointing, stable and without distortion. Fixed working table and can process the materials on the table freely.
The compatibility of the software is good, it can compatible the CAD/CAM design software such as type3/Artcam/Castmate and Wentai. It is suitable for the manufacture of many materia
Automatic tool-change systems like a bamboo hat, which can contain 8 knives, only need 10 seconds the tool can be changed. It has special knife table for focusing that can make up the error of the knives’ length.
Suitable fields:
Wooden industry: the process of the wave board, cabinet door, wooden door, artistic door, no-painting door, screen, process of the artistic window, shoes cleaning machine, cabinet of the play machine, mahjong table, computer board and furnishing.
Advertising industry: Advertising board, the design of the signs, the cutting of the acrylic, plastic absorb, the design of the multi-material decoration product.
Model industry: Can engrave on the steel model such as copper, aluminum, iron etc, Nonmetal materials such as man-made marble, sand, plastic board, PVC tube, wood board
Other fields: Can engrave many big embossments, widely used in the artistic field.
Technology Parameter:
Table area
1300*2500mm
Feed-in height
200-400mm
Resolution ratio
0.025mm
Spindle power
8KW(ItalyHSD)
Work voltage
AC380V/50Hz
Operating speed
80m/min
Spindle rotating speed
24000rpm/min
Cutter diameter
3.175 4 6 12.7
Command code
G code.uoo.mmg.plt
Adsorb power
5.5KW
Cutter control pressure
0.7Kpa
Cooling system
Italy cooling
Work mode
AC servo
Table
Vacuum table
Processor DSP
100MHZ
Interface
USB
JC-3030 cnc router and ptocessing machine
JC-3030 cnc router and ptocessing machine
1 high accuracy.
2, good stability.
3, beautiful shape
THE SPECIFICATIONS OF JC-3030 cnc router and ptocessing machine
Features: (optional items:Rotary axis),distinctive feature-worktable is moving back and forth
Model :
JC-3030
Machine surface :
Single/double
Worktable board :
300*300*40mm
Max .speed :
5000mm/min
Working speed :
0-3000mm/min
Working accuracy :
6-8mil
Least line diameter and least line spacing :
6-8mil
Drilling depth :
0.02-3mm
Drilling diameter :
0.4-3.175mm
Drilling holes :
40-100/min
Repeat accuracy :
0.025mm
The least error of data control drill :
0.015mm
Operation system :
WIN2000/XP
Means of communication :
PCI
Function request :
Protel PCB document can be directly put in .(gerber)
Spindle speed :
24000rpm
Spindle power :
800W/400W
Power supply :
AC210-240V
Packing:
Pack dimensions: 750*750*750 mm
Net weight: 70kg (with bracket)
Gross weight: 100 kg
Applications:
Can be used for advertisement engraving, advertisement cutting, stone processing, Cu
and AL molding, mold manufacturing, wood processing, craft manufacturing, light box
cutting, building mold cutting, indoor decoration cutting, light equipment mold processing,
sign and mark manufacturing, acrylic board processing, as well as stamp cutting and
PCB cutting
1 high accuracy.
2, good stability.
3, beautiful shape
THE SPECIFICATIONS OF JC-3030 cnc router and ptocessing machine
Features: (optional items:Rotary axis),distinctive feature-worktable is moving back and forth
Model :
JC-3030
Machine surface :
Single/double
Worktable board :
300*300*40mm
Max .speed :
5000mm/min
Working speed :
0-3000mm/min
Working accuracy :
6-8mil
Least line diameter and least line spacing :
6-8mil
Drilling depth :
0.02-3mm
Drilling diameter :
0.4-3.175mm
Drilling holes :
40-100/min
Repeat accuracy :
0.025mm
The least error of data control drill :
0.015mm
Operation system :
WIN2000/XP
Means of communication :
PCI
Function request :
Protel PCB document can be directly put in .(gerber)
Spindle speed :
24000rpm
Spindle power :
800W/400W
Power supply :
AC210-240V
Packing:
Pack dimensions: 750*750*750 mm
Net weight: 70kg (with bracket)
Gross weight: 100 kg
Applications:
Can be used for advertisement engraving, advertisement cutting, stone processing, Cu
and AL molding, mold manufacturing, wood processing, craft manufacturing, light box
cutting, building mold cutting, indoor decoration cutting, light equipment mold processing,
sign and mark manufacturing, acrylic board processing, as well as stamp cutting and
PCB cutting
JC-4040 of shapely and pint-sized pcb cnc router
JC-4040 of shapely and pint-sized pcb cnc router
1 shapely and pint-size
2 stable quality
3 low price
JC-4040 of Shapely and Pint-sized pcb cnc router
Features:
(optional items:Rotary axis),distinctive feature-worktable is moving back and forth
Model :
JC-4040
Machine surface :
Single/double
Worktable board :
400*400*40mm
Max .speed :
5000mm/min
Working speed :
0-3000mm/min
Working accuracy :
6-8mil
Least line diameter and least line spacing :
6-8mil
Drilling depth :
0.02-3mm
Drilling diameter :
0.4-3.175mm
Drilling holes :
40-100/min
Repeat accuracy :
0.025mm
The least error of data control drill :
0.015mm
Operation system :
WIN2000/XP
Means of communication :
PCI
Function request :
Protel PCB document can be directly put in .(gerber)
Spindle speed :
24000rpm
Spindle power :
800W/400W
Power supply :
AC210-240V
Packing:
Pack dimensions: 1200*1200*1300 mm
Net weight: 110kg (with bracket)
Gross weight: 120 kg
Applications:
Can be used for advertisement engraving, advertisement cutting, stone processing, Cu
and AL molding, mold manufacturing, wood processing, craft manufacturing, light box
cutting, building mold cutting, indoor decoration cutting, light equipment mold processing,
sign and mark manufacturing, acrylic board processing, as well as stamp cutting and
PCB cutting
1 shapely and pint-size
2 stable quality
3 low price
JC-4040 of Shapely and Pint-sized pcb cnc router
Features:
(optional items:Rotary axis),distinctive feature-worktable is moving back and forth
Model :
JC-4040
Machine surface :
Single/double
Worktable board :
400*400*40mm
Max .speed :
5000mm/min
Working speed :
0-3000mm/min
Working accuracy :
6-8mil
Least line diameter and least line spacing :
6-8mil
Drilling depth :
0.02-3mm
Drilling diameter :
0.4-3.175mm
Drilling holes :
40-100/min
Repeat accuracy :
0.025mm
The least error of data control drill :
0.015mm
Operation system :
WIN2000/XP
Means of communication :
PCI
Function request :
Protel PCB document can be directly put in .(gerber)
Spindle speed :
24000rpm
Spindle power :
800W/400W
Power supply :
AC210-240V
Packing:
Pack dimensions: 1200*1200*1300 mm
Net weight: 110kg (with bracket)
Gross weight: 120 kg
Applications:
Can be used for advertisement engraving, advertisement cutting, stone processing, Cu
and AL molding, mold manufacturing, wood processing, craft manufacturing, light box
cutting, building mold cutting, indoor decoration cutting, light equipment mold processing,
sign and mark manufacturing, acrylic board processing, as well as stamp cutting and
PCB cutting
JC-6090 Wood carving cnc router with Best price
1.Wood carving cnc router JC-6090
2.150-200mm feeding height
3.high speed and best price
4.CE approved
5.MOQ:1SET
JC-6090 Wood carving cnc router
(600*900mm)
Technical sheet :
Model:
JC-6090
Machine body:
Whole cast iron
Guideway:
XYZ-axis use cylinder guideway
Driving mode :
XYZ-axis use ballscrew
X,Y-axis working area :
600*900mm
Body dimensions(with bracket):
1350*1100*1500mm
Z-axis working area:
150 or 200 mm
Max. Feeding height:
120mm or bigger
Cut thickness of material:
≤40mm
Max. Speed:
8000mm/min
Working speed :
0-6000mm/min
Mechanical precision:
0.01mm
Compatible Software:
Type 3 software , Artcut software , Artcam software
Max. Power consumption:
3.2KW
Power source:
AC220/50HZ
Driver type:
Stepper motor (XYZ-85BYG motor)
Memory:
Without or DSP
Spindle:
1.5KW(80mm)or3.0KW(100mm)variable speed , water-cooled motor
Spindle speed:
0-24000rpm
Blade diameter:
3.175mm,4mm,6mm
Control system:
NCSTUDIO
Command:
G code ,u00,mmg,plt,HPGL
Running circumstance temperature:
0-45°C
Relative humidity:
30%-75%
Optional:
Rotary axis , vacuum table and dust collector
Applications:
wood engraving, wood cutting, stone processing cutting, Cu and Al molding cutting, mold manufacturing cutting, wood processing cutting, wood door manufacturing cutting, craft manufacturing cutting, light box cutting, building mold cutting, indoor decoration cutting, wave board processing cutting, light equipment mold processing cutting, sign and mark manufacturing cutting, Acryl board processing cutting, stamp cutting, and PCB cutting.
Inquiry advice:
in your inquriy please kindly tell us the working area you need so that we can give you the exact price .
thanks for your cooperations!
Transport:
We can send this machine to your national port or your home by sea , by air or by express such as TNT, UPS, DHL and so on . Do as you need.
If to your port, please tell us your port.
If to your home directly, please tell us your address, and better with post code.
Warranty:
One year for machine
We supply online service 24 hours a day MSN, Skype, Yahoo, Gmail and so on.
2.150-200mm feeding height
3.high speed and best price
4.CE approved
5.MOQ:1SET
JC-6090 Wood carving cnc router
(600*900mm)
Technical sheet :
Model:
JC-6090
Machine body:
Whole cast iron
Guideway:
XYZ-axis use cylinder guideway
Driving mode :
XYZ-axis use ballscrew
X,Y-axis working area :
600*900mm
Body dimensions(with bracket):
1350*1100*1500mm
Z-axis working area:
150 or 200 mm
Max. Feeding height:
120mm or bigger
Cut thickness of material:
≤40mm
Max. Speed:
8000mm/min
Working speed :
0-6000mm/min
Mechanical precision:
0.01mm
Compatible Software:
Type 3 software , Artcut software , Artcam software
Max. Power consumption:
3.2KW
Power source:
AC220/50HZ
Driver type:
Stepper motor (XYZ-85BYG motor)
Memory:
Without or DSP
Spindle:
1.5KW(80mm)or3.0KW(100mm)variable speed , water-cooled motor
Spindle speed:
0-24000rpm
Blade diameter:
3.175mm,4mm,6mm
Control system:
NCSTUDIO
Command:
G code ,u00,mmg,plt,HPGL
Running circumstance temperature:
0-45°C
Relative humidity:
30%-75%
Optional:
Rotary axis , vacuum table and dust collector
Applications:
wood engraving, wood cutting, stone processing cutting, Cu and Al molding cutting, mold manufacturing cutting, wood processing cutting, wood door manufacturing cutting, craft manufacturing cutting, light box cutting, building mold cutting, indoor decoration cutting, wave board processing cutting, light equipment mold processing cutting, sign and mark manufacturing cutting, Acryl board processing cutting, stamp cutting, and PCB cutting.
Inquiry advice:
in your inquriy please kindly tell us the working area you need so that we can give you the exact price .
thanks for your cooperations!
Transport:
We can send this machine to your national port or your home by sea , by air or by express such as TNT, UPS, DHL and so on . Do as you need.
If to your port, please tell us your port.
If to your home directly, please tell us your address, and better with post code.
Warranty:
One year for machine
We supply online service 24 hours a day MSN, Skype, Yahoo, Gmail and so on.
JCG1212 Advertising CNC Router
JCG1212 Advertising CNC Router
Solid steel frame construction
DSP Control
Automatic Tool Calibration
Stepper Driving Motor
JCG1212 Advertising CNC Router
1.Powerful compatibility
Internationalized directives ensure that it is compatible with Auto Cad/Cam software like type3/artcam/
castmate/proe/UG/artcut etc home and abroad.
2.Intelligent and humanized Design
It is able to keep engraving when the electricity is cut off or the tool is broken,intelligent control
of spindle makes it able to auto-start and auto-stop,which is more safety,convenient and power saving.
3.Easy operations, Support DSP and PCI control , the users could choose any deponds on own situations
Table size
1200*1200mm
Gantry height
140mm
Traveling Accuracy
±0.03 mm
Repositioning Accuracy
±0.02mm
Table Surface
T-slot Extrusions
Frame
Welded by steel pipe
Transmission on X/Y/Z
Ball crew rod
Guideway
Square linear rails
Max. Travel Speed
8m/min
Spindle Power Motor
1.5kw---2.2kw
Driving Motor
Stepper
Working Voltage
AC220V/50Hz/60Hz
Applicable file formate
G code, .mmg, .plt, .u00
Applicable Softwares
Type3/Artcam/Ucancam
Control System
Flexible control by DSP handle
Control Box
Inside of the machine
Solid steel frame construction
DSP Control
Automatic Tool Calibration
Stepper Driving Motor
JCG1212 Advertising CNC Router
1.Powerful compatibility
Internationalized directives ensure that it is compatible with Auto Cad/Cam software like type3/artcam/
castmate/proe/UG/artcut etc home and abroad.
2.Intelligent and humanized Design
It is able to keep engraving when the electricity is cut off or the tool is broken,intelligent control
of spindle makes it able to auto-start and auto-stop,which is more safety,convenient and power saving.
3.Easy operations, Support DSP and PCI control , the users could choose any deponds on own situations
Table size
1200*1200mm
Gantry height
140mm
Traveling Accuracy
±0.03 mm
Repositioning Accuracy
±0.02mm
Table Surface
T-slot Extrusions
Frame
Welded by steel pipe
Transmission on X/Y/Z
Ball crew rod
Guideway
Square linear rails
Max. Travel Speed
8m/min
Spindle Power Motor
1.5kw---2.2kw
Driving Motor
Stepper
Working Voltage
AC220V/50Hz/60Hz
Applicable file formate
G code, .mmg, .plt, .u00
Applicable Softwares
Type3/Artcam/Ucancam
Control System
Flexible control by DSP handle
Control Box
Inside of the machine
JCG1212-2 Double Head CNC Router
JCG1212-2 Double Head CNC Router
2 separate spindles
Solid steel frame construction
DSP Control interface
CE
JCG1212-2 Double Head CNC Router
High proficiency, 2 separate spindles, can work together or separately.
Solid steel frame construction.
DSP Control user-friendly operator interface.
Breakpoint memory, power outages continued carving, processing time forecast, and other functions to ensure that accidental processing.
NO.
Description
Parameters
1
X,Y,Z Working Area
1200*1200*120mm
2
Table Surface
T-slot Extrusions/With water tank
3
Spindle Motor
1.5kw, 2 separate spindles
4
Frame
Welded by steel pipe
5
X, Z Structure
Ball screw rod and round rails
6
Y Structure
Ball screw rod and square rails
7
Traveling Accuracy
±0.03 mm
8
Max.Air Move Speed
15000mm/min
9
Max.Working Speed
10000mm/min
10
Repositioning Accuracy
±0.02mm
11
Cooling Type
Water-cooling
12
Spindle Speed
0-24000RPM
13
Driving Motor
Stepper
14
Working Voltage
AC220V/50Hz
15
Command Language
G code, .mmg, .plt, .u00
16
Applicable Softwares
Type3/Artcam/Ucancam
17
Operating System
DSP
System
2 separate spindles
Solid steel frame construction
DSP Control interface
CE
JCG1212-2 Double Head CNC Router
High proficiency, 2 separate spindles, can work together or separately.
Solid steel frame construction.
DSP Control user-friendly operator interface.
Breakpoint memory, power outages continued carving, processing time forecast, and other functions to ensure that accidental processing.
NO.
Description
Parameters
1
X,Y,Z Working Area
1200*1200*120mm
2
Table Surface
T-slot Extrusions/With water tank
3
Spindle Motor
1.5kw, 2 separate spindles
4
Frame
Welded by steel pipe
5
X, Z Structure
Ball screw rod and round rails
6
Y Structure
Ball screw rod and square rails
7
Traveling Accuracy
±0.03 mm
8
Max.Air Move Speed
15000mm/min
9
Max.Working Speed
10000mm/min
10
Repositioning Accuracy
±0.02mm
11
Cooling Type
Water-cooling
12
Spindle Speed
0-24000RPM
13
Driving Motor
Stepper
14
Working Voltage
AC220V/50Hz
15
Command Language
G code, .mmg, .plt, .u00
16
Applicable Softwares
Type3/Artcam/Ucancam
17
Operating System
DSP
System
JCG1224 Advertising CNC Router Machine
JCG1224 Advertising CNC Router Machine
Steel frame
Ball screw rod
Square rails for Y-axis
T-slot
JCG1224 Advertising CNC Router Machine
Available to cut or engrave patterns on wood,aluminum sheet, wave plates, artificial panel, PVC,MDF and other flat plates. Widely used in the field of woodwroking, advertising, home decorations, sculpture craft, and any other fields.
Specifications:
NO.
Description
Parameters
1
X,Y,Z Working Area
1200*2400*200mm
2
Table Size
1440*3000mm
3
Traveling Accuracy
±0.03 mm
4
Repositioning Accuracy
±0.02mm
5
Table Surface
T-slot Extrusions
6
Frame
Steel
7
X, Y,Z Structure
Ball screw rod and round rail
8
Max.Air Move Speed
25000mm/min
9
Max.Working Speed
15000mm/min
10
Spindle Power Motor
1.5kw
11
Cooling Type
Water-cooling
12
Spindle Speed
0-24000RPM
13
Driving Motor
Stepper
14
Working Voltage
AC220V/50/60Hz
15
Command Language
G code
16
Applicable Softwares
Type3/Artcam/Ucancam
17
Operating System
Nc Studio
18
Software Compatibility
Win98/2000/XP
19
Running Environment
Temperature: 0°C~45°C
Relative humidity: 30%~75%
Steel frame
Ball screw rod
Square rails for Y-axis
T-slot
JCG1224 Advertising CNC Router Machine
Available to cut or engrave patterns on wood,aluminum sheet, wave plates, artificial panel, PVC,MDF and other flat plates. Widely used in the field of woodwroking, advertising, home decorations, sculpture craft, and any other fields.
Specifications:
NO.
Description
Parameters
1
X,Y,Z Working Area
1200*2400*200mm
2
Table Size
1440*3000mm
3
Traveling Accuracy
±0.03 mm
4
Repositioning Accuracy
±0.02mm
5
Table Surface
T-slot Extrusions
6
Frame
Steel
7
X, Y,Z Structure
Ball screw rod and round rail
8
Max.Air Move Speed
25000mm/min
9
Max.Working Speed
15000mm/min
10
Spindle Power Motor
1.5kw
11
Cooling Type
Water-cooling
12
Spindle Speed
0-24000RPM
13
Driving Motor
Stepper
14
Working Voltage
AC220V/50/60Hz
15
Command Language
G code
16
Applicable Softwares
Type3/Artcam/Ucancam
17
Operating System
Nc Studio
18
Software Compatibility
Win98/2000/XP
19
Running Environment
Temperature: 0°C~45°C
Relative humidity: 30%~75%
JCG6090 CNC Router 3D Wood Machine
JCG6090 CNC Router 3D Wood Machine
Cast Iron
T-slot worktable
Dustproof for X axes
Nc studio control, DSP optional
JCG6090 CNC Router 3D Wood Machine
1. The machine body is strong, rigid, high precision, reliable and durable.
2. Imported high-precision ball screw gap, smooth movement, to ensure that the machine tools high-precision
3. Using well-known domestic brands of water-cooled brush less spindle, low noise, strong cutting ability, to ensure the long time working.
4. Good three-axis and dust-proof structure to ensure that the machines longer service life.
5. High-performance driven motor to ensure that the machine’s high speed and accuracy
No.
Specification
1
X,Y,Z Working Area
600x900x120mm
2
Table Size
720x1135mm
3
Traveling Positioning Accuracy
±0.03/300mm
4
Repositioning Accuracy
±0.02mm
5
Table Surface
T-slot Extrusions
6
Frame
Cast Iron
7
X, Y,Z Structure
Ball screw rod and round rail
8
Max.Air Move Speed
10000mm/min
9
Max.Working Speed
6000mm/min
10
Spindle Power Motor
1.5kw
11
Cooling Type
Water-cooling
12
Spindle Speed
0-24000RPM
13
Driving Motor
Stepper
14
Working Voltage
AC220V/50/60HZ
15
Command Language
G code, .mmg, .plt, .u00
16
Applicable CAD/CAM Softwares
Type3/Artcam/Ucancam
17
Operating System
DSP System
Cast Iron
T-slot worktable
Dustproof for X axes
Nc studio control, DSP optional
JCG6090 CNC Router 3D Wood Machine
1. The machine body is strong, rigid, high precision, reliable and durable.
2. Imported high-precision ball screw gap, smooth movement, to ensure that the machine tools high-precision
3. Using well-known domestic brands of water-cooled brush less spindle, low noise, strong cutting ability, to ensure the long time working.
4. Good three-axis and dust-proof structure to ensure that the machines longer service life.
5. High-performance driven motor to ensure that the machine’s high speed and accuracy
No.
Specification
1
X,Y,Z Working Area
600x900x120mm
2
Table Size
720x1135mm
3
Traveling Positioning Accuracy
±0.03/300mm
4
Repositioning Accuracy
±0.02mm
5
Table Surface
T-slot Extrusions
6
Frame
Cast Iron
7
X, Y,Z Structure
Ball screw rod and round rail
8
Max.Air Move Speed
10000mm/min
9
Max.Working Speed
6000mm/min
10
Spindle Power Motor
1.5kw
11
Cooling Type
Water-cooling
12
Spindle Speed
0-24000RPM
13
Driving Motor
Stepper
14
Working Voltage
AC220V/50/60HZ
15
Command Language
G code, .mmg, .plt, .u00
16
Applicable CAD/CAM Softwares
Type3/Artcam/Ucancam
17
Operating System
DSP System
300Mbps 3G Router
1)3G Router 300Mbps
2)Chipset: Ralink 3052
3)SMA 2dBi antenna (2T2R)
4)1WAN port + 4LAN ports
5)OEM Support
3G Router 300Mbps
The 802.11n wireless router is compatible with IEEE802.11n standard, which supports data rate up to 300 Mbps in 2.4 GHz band.
The SL-R7205 is a 3G broadband networking compatible router, it integrated a 300M wireless access point , a 4port switch, firewall, allows you to quickly set up a 300Mbps wireless network and share a HSDPA/EVDO mobile connection. By plug-in a HSDPA/EVDO USB modem to the router, a Wi-Fi hotspot is established instantly ,allowing users to share an Internet connection somewhere 3G coverage is available. It also can help user to set up a wired or wireless network, and lets your computers share a high-speed DSL or Cable Internet connection.
Feature of Skylink SL-R7205 3G Router 300Mbps
-300M Wireless Router with Extended Range
-Built-in 4-port 10/100M Switch
-Supports far-distance transmission, 150 meters indoor, 400 meters outdoor (depends on the environments around)
-Compatible with UMTS/HSPA/EVDO USB modems, tested in the field
-3G/WAN failover guarantees an 'always-online' Internet connection
-Supports PPPoE, Dynamic IP, Static IP, PPTP, L2TP Cable Internet access
-SST technology dramatically increases link robustness and stability
-CCA technology enhances your signal stablility by automatically avoiding channel conflicts
-Wireless security encryption easily at the push of the QSS button
-WDS wireless bridge provides seamless bridging to expand your wireless network
-Supports QoS function
-IP based bandwidth control allows administrators to determine how much bandwidth is allotted to each PC
Specification of Skylink SL-R7205 3G Router 300Mbps
Standards
IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
Wireless Signal
Rates With
Automatic Fallback
11n: Up to 300Mbps (Dynamic)
11g: Up to 54Mbps (Dynamic)
11b: Up to 11Mbps (Dynamic)
Frequency Range
2.4-2.4835GHz
Wireless
Transmit Power
20dBm(EIRP)
Modulation Type
DBPSK,DQPSK,CCK, OFDM
Receiver Sensitivity
270M: -68dBm@10% PER
135M: -68dBm@10% PER
54M: -68dBm@10% PER
11M: -85dBm@8% PER
Wireless Security
64/128 bit WEPWPA/WPA2, WPA-PSK/WPA2-PSK
(TKIP/AES)
Interface
4*10/100M LAN Ports and 1 10/100M WAN Port
USB2.0 for UMTS/HSPA/EVDO USB Modem
Antenna Type
2dBi detachable Omni-directional Antenna
Power supply
Input AC100~240V,output DC/9V/1A
Operating Temperature
0°C~40°C (32°F~104°F)
Storage Temperature
-40°C~70°C (-40°F~158°F)
Relative Humidity
10% ~ 90%, non condensation
Storage Humidity
5%~95% non-condensing
Weight
260.5g
Dimensions
130mm×90mm×25mm
Package Contents(What's inside the box)
1*Skylink SL-R7205 3G Router 300Mbps
1*Power Adaptor
1*User's Manual
We are specialize in Network products more than 10 years,we always devoted to provide our client a whole network solution.including modem,router,3G router.WiFi router,Wireless Router,High power Wifi adapter,USB wifi adapter,Ethernet switches,PCI Lan card and Print sever.
If u are interested in our products,just contact me now!
2)Chipset: Ralink 3052
3)SMA 2dBi antenna (2T2R)
4)1WAN port + 4LAN ports
5)OEM Support
3G Router 300Mbps
The 802.11n wireless router is compatible with IEEE802.11n standard, which supports data rate up to 300 Mbps in 2.4 GHz band.
The SL-R7205 is a 3G broadband networking compatible router, it integrated a 300M wireless access point , a 4port switch, firewall, allows you to quickly set up a 300Mbps wireless network and share a HSDPA/EVDO mobile connection. By plug-in a HSDPA/EVDO USB modem to the router, a Wi-Fi hotspot is established instantly ,allowing users to share an Internet connection somewhere 3G coverage is available. It also can help user to set up a wired or wireless network, and lets your computers share a high-speed DSL or Cable Internet connection.
Feature of Skylink SL-R7205 3G Router 300Mbps
-300M Wireless Router with Extended Range
-Built-in 4-port 10/100M Switch
-Supports far-distance transmission, 150 meters indoor, 400 meters outdoor (depends on the environments around)
-Compatible with UMTS/HSPA/EVDO USB modems, tested in the field
-3G/WAN failover guarantees an 'always-online' Internet connection
-Supports PPPoE, Dynamic IP, Static IP, PPTP, L2TP Cable Internet access
-SST technology dramatically increases link robustness and stability
-CCA technology enhances your signal stablility by automatically avoiding channel conflicts
-Wireless security encryption easily at the push of the QSS button
-WDS wireless bridge provides seamless bridging to expand your wireless network
-Supports QoS function
-IP based bandwidth control allows administrators to determine how much bandwidth is allotted to each PC
Specification of Skylink SL-R7205 3G Router 300Mbps
Standards
IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
Wireless Signal
Rates With
Automatic Fallback
11n: Up to 300Mbps (Dynamic)
11g: Up to 54Mbps (Dynamic)
11b: Up to 11Mbps (Dynamic)
Frequency Range
2.4-2.4835GHz
Wireless
Transmit Power
20dBm(EIRP)
Modulation Type
DBPSK,DQPSK,CCK, OFDM
Receiver Sensitivity
270M: -68dBm@10% PER
135M: -68dBm@10% PER
54M: -68dBm@10% PER
11M: -85dBm@8% PER
Wireless Security
64/128 bit WEPWPA/WPA2, WPA-PSK/WPA2-PSK
(TKIP/AES)
Interface
4*10/100M LAN Ports and 1 10/100M WAN Port
USB2.0 for UMTS/HSPA/EVDO USB Modem
Antenna Type
2dBi detachable Omni-directional Antenna
Power supply
Input AC100~240V,output DC/9V/1A
Operating Temperature
0°C~40°C (32°F~104°F)
Storage Temperature
-40°C~70°C (-40°F~158°F)
Relative Humidity
10% ~ 90%, non condensation
Storage Humidity
5%~95% non-condensing
Weight
260.5g
Dimensions
130mm×90mm×25mm
Package Contents(What's inside the box)
1*Skylink SL-R7205 3G Router 300Mbps
1*Power Adaptor
1*User's Manual
We are specialize in Network products more than 10 years,we always devoted to provide our client a whole network solution.including modem,router,3G router.WiFi router,Wireless Router,High power Wifi adapter,USB wifi adapter,Ethernet switches,PCI Lan card and Print sever.
If u are interested in our products,just contact me now!
JCG6090 CNC Router Machine
JCG6090 CNC Router Machine
Cast Iron
T-slot worktable
Dustproof for X axes
Nc studio control, DSP optional
JCG6090 CNC Router Machine
1. The machine body is strong, rigid, high precision, reliable and durable.
2. Imported high-precision ball screw gap, smooth movement, to ensure that the machine tools high-precision
3. Using well-known domestic brands of water-cooled brush less spindle, low noise, strong cutting ability, to ensure the long time working.
4. Good three-axis and dust-proof structure to ensure that the machines longer service life.
5. High-performance driven motor to ensure that the machine’s high speed and accuracy
No.
Specification
1
X,Y,Z Working Area
600x900x120mm
2
Table Size
720x1135mm
3
Traveling Positioning Accuracy
±0.03/300mm
4
Repositioning Accuracy
±0.02mm
5
Table Surface
T-slot Extrusions
6
Frame
Cast Iron
7
X, Y,Z Structure
Ball screw rod and round rail
8
Max.Air Move Speed
10000mm/min
9
Max.Working Speed
6000mm/min
10
Spindle Power Motor
1.5kw
11
Cooling Type
Water-cooling
12
Spindle Speed
0-24000RPM
13
Driving Motor
Stepper
14
Working Voltage
AC220V/50/60HZ
15
Command Language
G code, .mmg, .plt, .u00
16
Applicable CAD/CAM Softwares
Type3/Artcam/Ucancam
17
Operating System
DSP System
Cast Iron
T-slot worktable
Dustproof for X axes
Nc studio control, DSP optional
JCG6090 CNC Router Machine
1. The machine body is strong, rigid, high precision, reliable and durable.
2. Imported high-precision ball screw gap, smooth movement, to ensure that the machine tools high-precision
3. Using well-known domestic brands of water-cooled brush less spindle, low noise, strong cutting ability, to ensure the long time working.
4. Good three-axis and dust-proof structure to ensure that the machines longer service life.
5. High-performance driven motor to ensure that the machine’s high speed and accuracy
No.
Specification
1
X,Y,Z Working Area
600x900x120mm
2
Table Size
720x1135mm
3
Traveling Positioning Accuracy
±0.03/300mm
4
Repositioning Accuracy
±0.02mm
5
Table Surface
T-slot Extrusions
6
Frame
Cast Iron
7
X, Y,Z Structure
Ball screw rod and round rail
8
Max.Air Move Speed
10000mm/min
9
Max.Working Speed
6000mm/min
10
Spindle Power Motor
1.5kw
11
Cooling Type
Water-cooling
12
Spindle Speed
0-24000RPM
13
Driving Motor
Stepper
14
Working Voltage
AC220V/50/60HZ
15
Command Language
G code, .mmg, .plt, .u00
16
Applicable CAD/CAM Softwares
Type3/Artcam/Ucancam
17
Operating System
DSP System
JCG6090 CNC Router Supplier
JCG6090 CNC Router Supplier
Cast Iron
T-slot table
Dustproof for X axis
Nc studio control, DSP optional
JCG6090 CNC Router Supplier
1. The machine body is strong, rigid, high precision, reliable and durable.
2. Imported high-precision ball screw gap, smooth movement, to ensure that the machine tools high-precision
3. Using well-known domestic brands of water-cooled brush less spindle, low noise, strong cutting ability, to ensure the long time working.
4. Good three-axis and dust-proof structure to ensure that the machines longer service life.
5. High-performance driven motor to ensure that the machine’s high speed and accuracy
No.
Specification
1
X,Y,Z Working Area
600x900x120mm
2
Table Size
720x1135mm
3
Traveling Positioning Accuracy
±0.03/300mm
4
Repositioning Accuracy
±0.02mm
5
Table Surface
T-slot Extrusions
6
Frame
Cast Iron
7
X, Y,Z Structure
Ball screw rod and round rail
8
Max.Air Move Speed
10000mm/min
9
Max.Working Speed
6000mm/min
10
Spindle Power Motor
1.5kw
11
Cooling Type
Water-cooling
12
Spindle Speed
0-24000RPM
13
Driving Motor
Stepper
14
Working Voltage
AC220V/50/60HZ
15
Command Language
G code, .mmg, .plt, .u00
16
Applicable CAD/CAM Softwares
Type3/Artcam/Ucancam
17
Operating System
DSP System
Cast Iron
T-slot table
Dustproof for X axis
Nc studio control, DSP optional
JCG6090 CNC Router Supplier
1. The machine body is strong, rigid, high precision, reliable and durable.
2. Imported high-precision ball screw gap, smooth movement, to ensure that the machine tools high-precision
3. Using well-known domestic brands of water-cooled brush less spindle, low noise, strong cutting ability, to ensure the long time working.
4. Good three-axis and dust-proof structure to ensure that the machines longer service life.
5. High-performance driven motor to ensure that the machine’s high speed and accuracy
No.
Specification
1
X,Y,Z Working Area
600x900x120mm
2
Table Size
720x1135mm
3
Traveling Positioning Accuracy
±0.03/300mm
4
Repositioning Accuracy
±0.02mm
5
Table Surface
T-slot Extrusions
6
Frame
Cast Iron
7
X, Y,Z Structure
Ball screw rod and round rail
8
Max.Air Move Speed
10000mm/min
9
Max.Working Speed
6000mm/min
10
Spindle Power Motor
1.5kw
11
Cooling Type
Water-cooling
12
Spindle Speed
0-24000RPM
13
Driving Motor
Stepper
14
Working Voltage
AC220V/50/60HZ
15
Command Language
G code, .mmg, .plt, .u00
16
Applicable CAD/CAM Softwares
Type3/Artcam/Ucancam
17
Operating System
DSP System
JCG6090-4 Sign CNC Router
JCG6090-4 Sign CNC Router
Cast Iron
Four spindles
T-slot worktable
Dustproof for X axis
JCG6090-4 Sign CNC Router
1. The machine body is strong, rigid, high precision, reliable and durable.
2. Imported high-precision ball screw gap, smooth movement, to ensure that the machine tools high-precision
3. Using well-known domestic brands of water-cooled brush less spindle, low noise, strong cutting ability, to ensure the long time working.
4. Good three-axis and dust-proof structure to ensure that the machines longer service life.
5. High-performance driven motor to ensure that the machine’s high speed and accuracy
No.
Specification
1
X,Y,Z Working Area
600x900x120mm
2
Table Size
720x1135mm
3
Traveling Positioning Accuracy
±0.03/300mm
4
Repositioning Accuracy
±0.02mm
5
Table Surface
T-slot Extrusions
6
Frame
Cast Iron
7
X, Y,Z Structure
Ball screw rod and round rail
8
Max.Air Move Speed
10000mm/min
9
Max.Working Speed
6000mm/min
10
Spindle Power Motor
1.5kw
11
Cooling Type
Water-cooling
12
Spindle Speed
0-24000RPM
13
Driving Motor
Stepper
14
Working Voltage
AC220V/50/60HZ
15
Command Language
G code, .mmg, .plt, .u00
16
Applicable CAD/CAM Softwares
Type3/Artcam/Ucancam
17
Operating System
DSP System
Cast Iron
Four spindles
T-slot worktable
Dustproof for X axis
JCG6090-4 Sign CNC Router
1. The machine body is strong, rigid, high precision, reliable and durable.
2. Imported high-precision ball screw gap, smooth movement, to ensure that the machine tools high-precision
3. Using well-known domestic brands of water-cooled brush less spindle, low noise, strong cutting ability, to ensure the long time working.
4. Good three-axis and dust-proof structure to ensure that the machines longer service life.
5. High-performance driven motor to ensure that the machine’s high speed and accuracy
No.
Specification
1
X,Y,Z Working Area
600x900x120mm
2
Table Size
720x1135mm
3
Traveling Positioning Accuracy
±0.03/300mm
4
Repositioning Accuracy
±0.02mm
5
Table Surface
T-slot Extrusions
6
Frame
Cast Iron
7
X, Y,Z Structure
Ball screw rod and round rail
8
Max.Air Move Speed
10000mm/min
9
Max.Working Speed
6000mm/min
10
Spindle Power Motor
1.5kw
11
Cooling Type
Water-cooling
12
Spindle Speed
0-24000RPM
13
Driving Motor
Stepper
14
Working Voltage
AC220V/50/60HZ
15
Command Language
G code, .mmg, .plt, .u00
16
Applicable CAD/CAM Softwares
Type3/Artcam/Ucancam
17
Operating System
DSP System
Subscribe to:
Posts (Atom)