Linksys WRT54GS Wireless-G Broadband Router with SpeedBooster
Standards - IEEE 802.3, IEEE 802.3u, IEEE 802.11g, IEEE 802.11b
Ports - One 10/100 RJ-45 Port, Four 10/100 RJ-45 Switched Ports
Button - Power Port, Reset Button
Cabling Type - UTP CAT 5
Technical Details
Model
: WRT54GS
Hardware Platform
: Pc
Number of Ports
: 4
Network Data Transfer Rate
: 54 Megabits Per Second
The Wireless-G Broadband Router with SpeedBooster is really three devices in one box. First, theres the Wireless Access Point, which lets you connect Wireless-G, Wireless-B, and other performance-enhanced SpeedBooster devices to the network. Theres also a built-in 4-port full-duplex 10/100 Switch to connect your wired-Ethernet devices together. Finally, the Router function ties it all together and lets your whole network share a high-speed cable or DSL Internet connection. The Wireless-G Broadband Router with SpeedBooster incorporates the next generation of Wireless-G (802.11g) networking. SpeedBooster technology is a compatible add-on to standard Wireless-G, which increases real-world wireless network performance by up to 35. Unlike other speed-enhancing technologies, SpeedBooster is fully 802.11 compliant, and a good neighbor to other wireless devices and technologies, using a single 2.4GHz channel as specified by the official wireless standard. And, unlike other technologies, with SpeedBooster youll see an overall speed improvement even when running a mixed network of SpeedBooster and regular Wireless-G devices.
Saturday, August 6, 2011
Linksys Wireless-G ADSL 2 Gateway Modem Router WAG200G
Linksys Wireless-G ADSL 2 Gateway Modem Router WAG200G
Brand Linksys
Product Description Linksys Wireless-G ADSL Home Gateway WAG200G - wireless router
Device Type Wireless router + 4-port switch (integrated)
Form Factor External
Dimensions: (WxDxH)3.2 cm x 14 cm x 14 cm
Weight: 350 g
Frequency Band 2.4 GHz
Data Transfer Rate 54 Mbps
Localisation: Europe
Routing Protocol RIP-1, RIP-2, static IP routing
Data Link Protocol Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g
Network / Transport Protocol PPTP, L2TP, IPSec, PPPoE, PPPoA
Remote Management Protocol HTTP
Digital Signaling Protocol ADSL, ADSL2+
Features Firewall protection, DMZ port, auto-sensing per device, dynamic IP address assignment , DHCP support, NAT support, auto-negotiation, auto-uplink (auto MDI/MDI-X),
Package Contents:
Wireless-G ADSL Home Gateway
Power Adapter
Network Cable
Phone Cable
If you want a sample,Please should have a look at our internet store
http://www.aliexpress.com/store/705797
Payment:
1. We accept payment via PAYPAL and Escrow ONLY.
2. Payment must be made within 5 days of auction closing.
3. TOTAL AMOUNT DUE includes the final auction price plus S&H(Shipping and Handling).
4. S&H will be determined based upon the SHIP TO address.
PLEASE NOTE: S&H DOES NOT INCLUDE DUTIES, LOCATL TAXES OR ANY OTHER IMPORTATION FEES.
5. Please list your special requests (color, packages, value of declaration, etc.) in the NOTES when you make payment.
Shipping:
1. Orders processed within 3 days of payment verification.
2. Always marke items as Gift and delcare the lowest value
3. Your items are sent via registered airmail or parcel from China Post or HongKong Post.
4. The shipping usually takes 7-20 working days to reach via registered airmail,via parcel or express airmail, it takes 3-7 days.
3. The images shown are not the actual item and are for your reference only.
4. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
5. If you have not received your shipment within 30 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
Returns:
1. You have 10 days to contact us and 14 days to return it from the date it was received. If this item is in your possession more than 10 days, it is considered used and WE WILL NOT ISSUE YOU A REFUND OR REPLACEMENT. There are NO EXCEPTIONS!
2. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your eBay ID.
3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
4. Return shipping is covered by the Buyer.
Feedback:
When you receive the items and are satisfied, pls take a minute to leave us a positive feedback.
We will do the same too.
pls contact us immediately first before you leave us neutral or negative feedback.
We will try our best to solve cases well with you
About Us:
Our Company have done business on eBay for 4 years,and we maintain high positive feedback rate.
We offer good price and quaity.
We do our best to serve each and every customer.
Please buy with complete confidence from us!
Brand Linksys
Product Description Linksys Wireless-G ADSL Home Gateway WAG200G - wireless router
Device Type Wireless router + 4-port switch (integrated)
Form Factor External
Dimensions: (WxDxH)3.2 cm x 14 cm x 14 cm
Weight: 350 g
Frequency Band 2.4 GHz
Data Transfer Rate 54 Mbps
Localisation: Europe
Routing Protocol RIP-1, RIP-2, static IP routing
Data Link Protocol Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g
Network / Transport Protocol PPTP, L2TP, IPSec, PPPoE, PPPoA
Remote Management Protocol HTTP
Digital Signaling Protocol ADSL, ADSL2+
Features Firewall protection, DMZ port, auto-sensing per device, dynamic IP address assignment , DHCP support, NAT support, auto-negotiation, auto-uplink (auto MDI/MDI-X),
Package Contents:
Wireless-G ADSL Home Gateway
Power Adapter
Network Cable
Phone Cable
If you want a sample,Please should have a look at our internet store
http://www.aliexpress.com/store/705797
Payment:
1. We accept payment via PAYPAL and Escrow ONLY.
2. Payment must be made within 5 days of auction closing.
3. TOTAL AMOUNT DUE includes the final auction price plus S&H(Shipping and Handling).
4. S&H will be determined based upon the SHIP TO address.
PLEASE NOTE: S&H DOES NOT INCLUDE DUTIES, LOCATL TAXES OR ANY OTHER IMPORTATION FEES.
5. Please list your special requests (color, packages, value of declaration, etc.) in the NOTES when you make payment.
Shipping:
1. Orders processed within 3 days of payment verification.
2. Always marke items as Gift and delcare the lowest value
3. Your items are sent via registered airmail or parcel from China Post or HongKong Post.
4. The shipping usually takes 7-20 working days to reach via registered airmail,via parcel or express airmail, it takes 3-7 days.
3. The images shown are not the actual item and are for your reference only.
4. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
5. If you have not received your shipment within 30 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
Returns:
1. You have 10 days to contact us and 14 days to return it from the date it was received. If this item is in your possession more than 10 days, it is considered used and WE WILL NOT ISSUE YOU A REFUND OR REPLACEMENT. There are NO EXCEPTIONS!
2. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your eBay ID.
3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
4. Return shipping is covered by the Buyer.
Feedback:
When you receive the items and are satisfied, pls take a minute to leave us a positive feedback.
We will do the same too.
pls contact us immediately first before you leave us neutral or negative feedback.
We will try our best to solve cases well with you
About Us:
Our Company have done business on eBay for 4 years,and we maintain high positive feedback rate.
We offer good price and quaity.
We do our best to serve each and every customer.
Please buy with complete confidence from us!
Linksys router,3G broadband router,network router
Linksys router,3G broadband router,network router Wireless Point (G/B)
4-Port Full-Duplex
Vodafone 3G/UMTS or GPRS
Linksys router,3G broadband router,network router
The Linksys WRT54G3G is a Wireless-G Router for 3G/UMTS Broadband. It features a Wireless Access Point for Wireless-G and Wireless-B device connections, a built-in 4-port full-duplex 10/100 switch for Ethernet devices, AND the ability to let your whole network share a 3G/UMTS or GPRS Internet connection.
Features:
• Wireless-G for 3G/UMTS
• Wireless Point (G/B)
• 4-Port Full-Duplex
• Vodafone 3G/UMTS or GPRS
• WPA/WPA/WPA2 Encryption
• HDCP Server
• SPI Firewall
• VPN Pass-Through
• 1 Year Limited Warranty
Specifications:
• Device Type: Wireless router + 4-port switch (integrated)
• Form Factor: External
• Dimensions (WxDxH): 6.7 in x 1.3 in x 6.7 in
• Weight: 12.3 oz
• Data Transfer Rate: 54 Mbps
• Frequency Band: 2.4 GHz
• Data Link Protocol: Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g
• Remote Management Protocol: HTTP
• Features: Firewall protection, DMZ port, auto-sensing per device, dynamic IP address assignment , DHCP support, auto-negotiation, Stateful Packet Inspection (SPI), MAC address filtering, firmware upgradable
• Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.11b, IEEE 802.11g, Wi-Fi CERTIFIED
• System Requirements: Microsoft Windows 98SE/2000/ME/XP
Package contents:
• Wireless-G Router for Mobile Broadband Setup
• CD-ROM Quick Installation Guide
• User Guide on CD-ROM
• Power Adapter
• Ethernet Cable
4-Port Full-Duplex
Vodafone 3G/UMTS or GPRS
Linksys router,3G broadband router,network router
The Linksys WRT54G3G is a Wireless-G Router for 3G/UMTS Broadband. It features a Wireless Access Point for Wireless-G and Wireless-B device connections, a built-in 4-port full-duplex 10/100 switch for Ethernet devices, AND the ability to let your whole network share a 3G/UMTS or GPRS Internet connection.
Features:
• Wireless-G for 3G/UMTS
• Wireless Point (G/B)
• 4-Port Full-Duplex
• Vodafone 3G/UMTS or GPRS
• WPA/WPA/WPA2 Encryption
• HDCP Server
• SPI Firewall
• VPN Pass-Through
• 1 Year Limited Warranty
Specifications:
• Device Type: Wireless router + 4-port switch (integrated)
• Form Factor: External
• Dimensions (WxDxH): 6.7 in x 1.3 in x 6.7 in
• Weight: 12.3 oz
• Data Transfer Rate: 54 Mbps
• Frequency Band: 2.4 GHz
• Data Link Protocol: Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g
• Remote Management Protocol: HTTP
• Features: Firewall protection, DMZ port, auto-sensing per device, dynamic IP address assignment , DHCP support, auto-negotiation, Stateful Packet Inspection (SPI), MAC address filtering, firmware upgradable
• Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.11b, IEEE 802.11g, Wi-Fi CERTIFIED
• System Requirements: Microsoft Windows 98SE/2000/ME/XP
Package contents:
• Wireless-G Router for Mobile Broadband Setup
• CD-ROM Quick Installation Guide
• User Guide on CD-ROM
• Power Adapter
• Ethernet Cable
Linksys router
linksys router RTP300
Supports Dynamic host configuration protocol
Supports session initialion protocol(SIP)
linksys router rtp300
Features
Four 10/100 BaseT Ethernet Ports to share Internet Connection
Two RJ11 voice ports for analog phones or fax machines with two independent telephone numbers
Support QoS (Quality of Service) to ensure best quality voice
Supports Access Control to block specific PC's on the network from gaining access to Internet
Supports SPI Firewall to limit the risk of intrusion attempts
Web-based configuration through a built-in web server
"Supports High speed Internet Connection for FTTH Deployments
Supports auto-provisioning with provisioning servers for configuration and upgrades
Supports Session Initiation Protocol (SIP)
Supports DTMF tone detection and generation
Supports Voice Activity Detection (VAD) and Silence Suppression
Supports Comfort Noise Generation (CNG)
Supports Caller ID generation and detecting (FSK and DTMF)
Supports Echo Cancellation (G.165 and G.168)
Supports T.38 Fax Really including V.17, V.21, V.27ter and V.29 and FAX Pass-through (PCM)
Supports multiple voice compression G.711, G.726, G.729, G.723.1
Specifications
Model Number RTP300
Standards IEEE 802.3 (10BaseT), IEEE 802.3u (100BaseTX)
Ports/Buttons One 10/100 RJ-45 Internet Port, Four 10/100 RJ-45 Network
Ports, Two Standard Phone Ports, One Power Port, Reset Button
Cabling Type RJ45 Ethernet Category 5, RJ11 Standard Phone cable
LEDs INTERNET, PHONE2, PHONE1, ETHERNET(1-4), POWER
UPnP able/cert Certified
Network Protocols TCP/IP
Voice Protocols Session Initiation Protocol (SIP v2)
Voice Codecs G.711 a-law, G.711µ-Law, G.726, G.729 A/B/E, and G.723.1
Ringer equivalence number (REN) 5 REN per RJ-11 port
FXS Port Impedance 600 ohm resistive or 270 ohm + 750ohm/150nF complex impedance
Ring Frequency 25 Hz
Ring Voltage 40 - 50 Vrms
Warranty 1 year
Environmental
Dimensions 170 mm x 170 mm x 31 mm (W x D x H) (6.69" x 6.69" x 1.22")
Unit Weight 12.20 oz. (0.346 kg)
Power Input External, 12V DC, 1.0A
Certifications FCC, CE, cUL
Operating Temp. 32ºF to 104ºF (0ºC to 40ºC)
Storage Temp. -4ºF to 140ºF (-20ºC to 60ºC)
Operating Humidity 10% to 85%, Non-Condensing
Storage Humidity 5% to 90%, Non-Condensing
Supports Dynamic host configuration protocol
Supports session initialion protocol(SIP)
linksys router rtp300
Features
Four 10/100 BaseT Ethernet Ports to share Internet Connection
Two RJ11 voice ports for analog phones or fax machines with two independent telephone numbers
Support QoS (Quality of Service) to ensure best quality voice
Supports Access Control to block specific PC's on the network from gaining access to Internet
Supports SPI Firewall to limit the risk of intrusion attempts
Web-based configuration through a built-in web server
"Supports High speed Internet Connection for FTTH Deployments
Supports auto-provisioning with provisioning servers for configuration and upgrades
Supports Session Initiation Protocol (SIP)
Supports DTMF tone detection and generation
Supports Voice Activity Detection (VAD) and Silence Suppression
Supports Comfort Noise Generation (CNG)
Supports Caller ID generation and detecting (FSK and DTMF)
Supports Echo Cancellation (G.165 and G.168)
Supports T.38 Fax Really including V.17, V.21, V.27ter and V.29 and FAX Pass-through (PCM)
Supports multiple voice compression G.711, G.726, G.729, G.723.1
Specifications
Model Number RTP300
Standards IEEE 802.3 (10BaseT), IEEE 802.3u (100BaseTX)
Ports/Buttons One 10/100 RJ-45 Internet Port, Four 10/100 RJ-45 Network
Ports, Two Standard Phone Ports, One Power Port, Reset Button
Cabling Type RJ45 Ethernet Category 5, RJ11 Standard Phone cable
LEDs INTERNET, PHONE2, PHONE1, ETHERNET(1-4), POWER
UPnP able/cert Certified
Network Protocols TCP/IP
Voice Protocols Session Initiation Protocol (SIP v2)
Voice Codecs G.711 a-law, G.711µ-Law, G.726, G.729 A/B/E, and G.723.1
Ringer equivalence number (REN) 5 REN per RJ-11 port
FXS Port Impedance 600 ohm resistive or 270 ohm + 750ohm/150nF complex impedance
Ring Frequency 25 Hz
Ring Voltage 40 - 50 Vrms
Warranty 1 year
Environmental
Dimensions 170 mm x 170 mm x 31 mm (W x D x H) (6.69" x 6.69" x 1.22")
Unit Weight 12.20 oz. (0.346 kg)
Power Input External, 12V DC, 1.0A
Certifications FCC, CE, cUL
Operating Temp. 32ºF to 104ºF (0ºC to 40ºC)
Storage Temp. -4ºF to 140ºF (-20ºC to 60ºC)
Operating Humidity 10% to 85%, Non-Condensing
Storage Humidity 5% to 90%, Non-Condensing
Long Life Time Woodworking CNC Router
Our woodworking cnc router is widely used for woodworking industry, furniuter industry, art industry and so on.
Long Life Time Woodworking CNC Router
Standard Features:
1. Whole machine is welded with seamless steel structure; the stability is excellent, not easy to be deformed.
2. Three axes adopt imported HIWIN linear orbit; X and Y axes adopt rack and pinion transmission, fast working, high efficiency and low cost. Z axis adopts ball screw,with high precision and long life time.
3. Well compatibility: CAD/CAM designing software e.g. Type 3/ Artcam/ Castmate/ Wentai etc.
4. Has the function of re-carving after break point and power failure.
5. Has the function of forecasting process time.
6. Adopting advanced DSP system with USB connection, operated with the handle, convenient operation. Our engraver can completely work off-line and do not take any computer resources.
7. Perfect oil-inject system makes maintenance much easier.
8. Adopting water cooling system, it can provide good cooling effect when carving flinty materials.
9. We provide the DSP operating instruction in English, eight standard cutters, and three software: Type3/Artcam and Wentai for free.
Applicable industries
Processing various kinds of moulds and furniture such as door, window, cabinet, craft wooden door, screen and so on.
Applicable materials
Wood, plastic, density board, wave board, PVC, acrylic, crystal, aluminum board, light marble and other nonmetal materials and light metal materials.
Processing effect
Our router is widely used for engraving, cutting various shade vulture, relief and ect.
Technical Parameter: CC-M1530B
Description
Parameter
X,Y Working Area
1500*3000mm
Z Working Area
200mm
Table Size
1640*3540mm
Package size
1840*3740*1900mm
Resolution
0.01mm
Lathe Structure
Seamless welded steel structure
X,Y Structure
Rack and pinion transmission,
Taiwan HIWIN Linear orbit
Z Structure
Ball screw
Max. Idling Speed
35m/min
Spindle Motor Power
3.0Kw
Spindle Rotate Speed
0-24000r/min
Working Voltage
AC380V/50Hz
Working Mode
Stepper
Command
G code,HPGL,U00,mmg,plt
Operating System
DSP Handle
Diameter of cutter
φ3.175-φ12.7mm
Cooling Mode
Water-cooling
Dust-collect Function
Yes
Dust Collect
3.0Kw two-bag dust collect
Work-holding
By clamp
Net Weight
1350KG
Gross Weight
1500KG
Samples:
Long Life Time Woodworking CNC Router
Standard Features:
1. Whole machine is welded with seamless steel structure; the stability is excellent, not easy to be deformed.
2. Three axes adopt imported HIWIN linear orbit; X and Y axes adopt rack and pinion transmission, fast working, high efficiency and low cost. Z axis adopts ball screw,with high precision and long life time.
3. Well compatibility: CAD/CAM designing software e.g. Type 3/ Artcam/ Castmate/ Wentai etc.
4. Has the function of re-carving after break point and power failure.
5. Has the function of forecasting process time.
6. Adopting advanced DSP system with USB connection, operated with the handle, convenient operation. Our engraver can completely work off-line and do not take any computer resources.
7. Perfect oil-inject system makes maintenance much easier.
8. Adopting water cooling system, it can provide good cooling effect when carving flinty materials.
9. We provide the DSP operating instruction in English, eight standard cutters, and three software: Type3/Artcam and Wentai for free.
Applicable industries
Processing various kinds of moulds and furniture such as door, window, cabinet, craft wooden door, screen and so on.
Applicable materials
Wood, plastic, density board, wave board, PVC, acrylic, crystal, aluminum board, light marble and other nonmetal materials and light metal materials.
Processing effect
Our router is widely used for engraving, cutting various shade vulture, relief and ect.
Technical Parameter: CC-M1530B
Description
Parameter
X,Y Working Area
1500*3000mm
Z Working Area
200mm
Table Size
1640*3540mm
Package size
1840*3740*1900mm
Resolution
0.01mm
Lathe Structure
Seamless welded steel structure
X,Y Structure
Rack and pinion transmission,
Taiwan HIWIN Linear orbit
Z Structure
Ball screw
Max. Idling Speed
35m/min
Spindle Motor Power
3.0Kw
Spindle Rotate Speed
0-24000r/min
Working Voltage
AC380V/50Hz
Working Mode
Stepper
Command
G code,HPGL,U00,mmg,plt
Operating System
DSP Handle
Diameter of cutter
φ3.175-φ12.7mm
Cooling Mode
Water-cooling
Dust-collect Function
Yes
Dust Collect
3.0Kw two-bag dust collect
Work-holding
By clamp
Net Weight
1350KG
Gross Weight
1500KG
Samples:
Low price Ti chip ADSL Wireless Router
Wireless 802.11G Router
1. Ti Chip
2. Factory Price
3.CE approved , ROHS , FCC
4.Well-designed
EP-DL520GWireless 802.11G Router
1.This is a well-designed high-speed and high performance adsl2+ router, which provides 1-port switch function and supports kinds of network protocols, steady runs
2.EP-DL520GWireless 802.11G Router is compatible with various DSLAM, which is preferred by the individual users, the SOHO, and the small enterprise to access the internet.
Features
Full speed, auto-sense ADSL 2+ routing, bridging
Up to 24mbps downstream and up to 1024kbps upstream data rate
Maximum transmission range:6.5 kilometers
Friendly GUI for web configuration
Compatible with virtually all standard internet applications
Support for up to 8 permanent virtual circuits (PVC)
NAT, IP filtering and password authentication to modem
Support remote management
Support build-in PPPoE
Specification:
ADSL specification
Line Coding
Discrete Multi-Tone (DMT)
Standard Compliant
Full rate ADSL ANSI T1.413 Issue 2
ITU G.992.1 (G.dmt) Splitter less G.992.2
ITU G.994.1 G.996.1 ITU 992.5(ADSL 2+)
Data Rate
Maximum transmission rate: Downstream up to 25 Mbps, and
Upstream up to 1024 kbps
ATM specification
ATM Adaptation Layer
Support AAL5
VCs
Support 8 Permanent Virtual Circuits (PVCs)
Service Class
UBR, CBR, rt-VBR, nrt-VBR
OAM
ITU-T I.610 OAM Principles & Functions (include F4/F5)
***Our profesional service
1)One -year guarantee.
2)One stop service
3)OEM & ODM are welcome
***With the strong belief and continuous efforts . EDUP will create every product with heart , and provide excellent service for our customers . Welcome your inquiry !
*** 24 hours ' Hot line order
+ 86-15016731955 (Miss Aurora )
1. Ti Chip
2. Factory Price
3.CE approved , ROHS , FCC
4.Well-designed
EP-DL520GWireless 802.11G Router
1.This is a well-designed high-speed and high performance adsl2+ router, which provides 1-port switch function and supports kinds of network protocols, steady runs
2.EP-DL520GWireless 802.11G Router is compatible with various DSLAM, which is preferred by the individual users, the SOHO, and the small enterprise to access the internet.
Features
Full speed, auto-sense ADSL 2+ routing, bridging
Up to 24mbps downstream and up to 1024kbps upstream data rate
Maximum transmission range:6.5 kilometers
Friendly GUI for web configuration
Compatible with virtually all standard internet applications
Support for up to 8 permanent virtual circuits (PVC)
NAT, IP filtering and password authentication to modem
Support remote management
Support build-in PPPoE
Specification:
ADSL specification
Line Coding
Discrete Multi-Tone (DMT)
Standard Compliant
Full rate ADSL ANSI T1.413 Issue 2
ITU G.992.1 (G.dmt) Splitter less G.992.2
ITU G.994.1 G.996.1 ITU 992.5(ADSL 2+)
Data Rate
Maximum transmission rate: Downstream up to 25 Mbps, and
Upstream up to 1024 kbps
ATM specification
ATM Adaptation Layer
Support AAL5
VCs
Support 8 Permanent Virtual Circuits (PVCs)
Service Class
UBR, CBR, rt-VBR, nrt-VBR
OAM
ITU-T I.610 OAM Principles & Functions (include F4/F5)
***Our profesional service
1)One -year guarantee.
2)One stop service
3)OEM & ODM are welcome
***With the strong belief and continuous efforts . EDUP will create every product with heart , and provide excellent service for our customers . Welcome your inquiry !
*** 24 hours ' Hot line order
+ 86-15016731955 (Miss Aurora )
Low Price Wifi Router
Original ZTE AC30+ 3g WiFi Router
HSUPA/HSDPA/UMTS 2100MHz
EDGE/GPRS/GSM 1900/1800/900(850)MHz
EVDO Rev.A 800/2100mhz
ZTE AC 30 Wifi Hotspot
Provide Indoor Coverage
Support 5 Wi-Fi access Radio
ZTE AC30 is a 2G/3G Wi-Fi device, working in GSM/GPRS/EDGE/WCDMA/EV-DO/HSPA network. The client devices could connect to it via USB or Wi-Fi interface. The device supports data and SMS services, enabling you to communicate anytime and anywhere.
Specification:
* HSUPA/HSDPA/UMTS 2100MHz
* EDGE/GPRS/GSM 1900/1800/900(850)MHz
* EVDO Rev.A 800/2100 MHz
* WiFi 802.11b/g
* Wi-Fi Standard 802.11b/g
* Wi-Fi Security WEP/WPA/WPA2
* USB 2.0 HIGH SPEED
* Speed(WCDMA) download :7.2Mbps upload:5.76Mbps
* Speed(EVDO) download:3.1Mbps upload:1.8Mbps
* Dimension: 99mm × 53mm × 14mm
* Weight 80g
* Operating system Windows 7, Windows Vista(32bit or 64bit), Windows XP (SP3 or later), MAC(10.4 or later)
* Web Browser: IE (7.0 or later), Firefox (3.0 or later), Opera (10.0 or later), Safari (4.0 or later), Chrome (5.0 or later)
Battery:
* Power Adapter 5V/700mA
* Battery capacity 1500mAh
* Working time About 4hours
* Standby time About 100hours
Notes: The standby and working time of ZTE AC30 3G Router are only for your reference. They are based on the ideal working environment.
Temperature:
* Operating temperature: -10°C ~ +60°C
* Storage temperature -20°C ~ +50°C
* Charging temperature 0°C ~ +45°C
HSUPA/HSDPA/UMTS 2100MHz
EDGE/GPRS/GSM 1900/1800/900(850)MHz
EVDO Rev.A 800/2100mhz
ZTE AC 30 Wifi Hotspot
Provide Indoor Coverage
Support 5 Wi-Fi access Radio
ZTE AC30 is a 2G/3G Wi-Fi device, working in GSM/GPRS/EDGE/WCDMA/EV-DO/HSPA network. The client devices could connect to it via USB or Wi-Fi interface. The device supports data and SMS services, enabling you to communicate anytime and anywhere.
Specification:
* HSUPA/HSDPA/UMTS 2100MHz
* EDGE/GPRS/GSM 1900/1800/900(850)MHz
* EVDO Rev.A 800/2100 MHz
* WiFi 802.11b/g
* Wi-Fi Standard 802.11b/g
* Wi-Fi Security WEP/WPA/WPA2
* USB 2.0 HIGH SPEED
* Speed(WCDMA) download :7.2Mbps upload:5.76Mbps
* Speed(EVDO) download:3.1Mbps upload:1.8Mbps
* Dimension: 99mm × 53mm × 14mm
* Weight 80g
* Operating system Windows 7, Windows Vista(32bit or 64bit), Windows XP (SP3 or later), MAC(10.4 or later)
* Web Browser: IE (7.0 or later), Firefox (3.0 or later), Opera (10.0 or later), Safari (4.0 or later), Chrome (5.0 or later)
Battery:
* Power Adapter 5V/700mA
* Battery capacity 1500mAh
* Working time About 4hours
* Standby time About 100hours
Notes: The standby and working time of ZTE AC30 3G Router are only for your reference. They are based on the ideal working environment.
Temperature:
* Operating temperature: -10°C ~ +60°C
* Storage temperature -20°C ~ +50°C
* Charging temperature 0°C ~ +45°C
Low cost CNC router 1200*2400*(400-1000)mm For stone moulding and foam cutting with Long life
CNC router
1. 1.2*2.4m size,Z 400-1000mm
2. 6kw air spindle,strong heavy loading
3. mould,stone and foam cutting,sculpture
CHAODA CNC Router JCS1230HL-600mm for engraving /moulding of Stone marble grainte,tile,EPS,FOAM,etc
1.Technical Parameter :
X.Y.Zworking size
1200*3000mm(600mm)
Spindle power
6kw air cooling
Spindle rotating speed
0-24000rpm
Control system
Ncstudio English / DSP English
X Y structure
Gear Wheel Transmission, Linear Bearings
Z structure
Ball Screw, Linear Bearings
Table structure
Steel
Processing precision
0.02mm
Max speed
8000mm/min
Motor
Large power stepper (option: Servo)
Voltage
AC380v/50hz
Power
2000w
2.Technical Features:
1 . Welded lathe bed of profiled steel, stabilizing treated under high temperature
2. Adopt Air cooling spindle and large power motor ensure the quickly processing for hard materials.
3. 800mm height Z axis and movement gantry to burden heavy and thickness Foam /Plastic products.
4 . Double high Z axis drive and Gantry movement With high precision rack gear transmission, and Imported square linear guide rail that ensure high accuracy , fast speed ,heavy duty with long service life.
5. Professional design and high quality machine parts provides this with low break down rate
6. Diamond cutting tools are very durable for cutting , perfectly meet your business requirements.
7. All dust-proof and water-proof design.
8. Those items are very suitable for making deep foam , plastic ,stone, wood mould works, surely also can widely used for flat materials such as flat stone, wood, aluminum, copper, PVC and other hard and soft materials.
1. 1.2*2.4m size,Z 400-1000mm
2. 6kw air spindle,strong heavy loading
3. mould,stone and foam cutting,sculpture
CHAODA CNC Router JCS1230HL-600mm for engraving /moulding of Stone marble grainte,tile,EPS,FOAM,etc
1.Technical Parameter :
X.Y.Zworking size
1200*3000mm(600mm)
Spindle power
6kw air cooling
Spindle rotating speed
0-24000rpm
Control system
Ncstudio English / DSP English
X Y structure
Gear Wheel Transmission, Linear Bearings
Z structure
Ball Screw, Linear Bearings
Table structure
Steel
Processing precision
0.02mm
Max speed
8000mm/min
Motor
Large power stepper (option: Servo)
Voltage
AC380v/50hz
Power
2000w
2.Technical Features:
1 . Welded lathe bed of profiled steel, stabilizing treated under high temperature
2. Adopt Air cooling spindle and large power motor ensure the quickly processing for hard materials.
3. 800mm height Z axis and movement gantry to burden heavy and thickness Foam /Plastic products.
4 . Double high Z axis drive and Gantry movement With high precision rack gear transmission, and Imported square linear guide rail that ensure high accuracy , fast speed ,heavy duty with long service life.
5. Professional design and high quality machine parts provides this with low break down rate
6. Diamond cutting tools are very durable for cutting , perfectly meet your business requirements.
7. All dust-proof and water-proof design.
8. Those items are very suitable for making deep foam , plastic ,stone, wood mould works, surely also can widely used for flat materials such as flat stone, wood, aluminum, copper, PVC and other hard and soft materials.
Luxury portfolio router
Luxury portfolio router
Luxury portfolio router
Can follow the customer's request, the cabinet design and the favorite color for the customer to affix signs or special box design. At the same time, you can paste the location of all right router. This clear, benefit management, use and maintenance of the factory so there is a coordinated unity, bringing bright, clean and beautiful.
Luxury portfolio router
Can follow the customer's request, the cabinet design and the favorite color for the customer to affix signs or special box design. At the same time, you can paste the location of all right router. This clear, benefit management, use and maintenance of the factory so there is a coordinated unity, bringing bright, clean and beautiful.
3030 pcb cnc router for drilling and milling, International standard !!!
desktop pcb cnc router
300*300mm pcb cnc router
design software--Protel99
control--NCstudio
CE approved
JC-3030 Mini pcb cnc router / pcb router machine /pcb drilling and milling machine
Technical sheet :
Features:
(optional items:Rotary axis),distinctive feature-worktable is moving back and forth
Model :
JC-3030
Machine surface :
Single/double
Worktable board :
300*300*40mm
Max .speed :
5000mm/min
Working speed :
0-3000mm/min
Working accuracy :
6-8mil
Least line diameter and least line spacing :
6-8mil
Drilling depth :
0.02-3mm
Drilling diameter :
0.4-3.175mm
Drilling holes :
40-100/min
Repeat accuracy :
0.025mm
The least error of data control drill :
0.015mm
Operation system :
WIN2000/XP
Means of communication :
PCI
Function request :
Protel PCB document can be directly put in .(gerber)
Spindle speed :
24000rpm
Spindle power :
800W/400W
Power supply :
AC210-240V
Packing:
Pack dimensions: 1200*1200*1300 mm
Net weight: 110kg (with bracket)
Gross weight: 120 kg
Applications:
Can be used for advertisement engraving, advertisement cutting, stone processing, Cu
and AL molding, mold manufacturing, wood processing, craft manufacturing, light box
cutting, building mold cutting, indoor decoration cutting, light equipment mold processing,
sign and mark manufacturing, acrylic board processing, as well as stamp cutting and
PCB cutting
for more details with other sizes or different models. please contact with us ....
1.Engraving Tools :
2.800W spindle
3.Long Men structure and Worktable
4.1.5kw Water-cooled spindle
5.Control Box
6. Y-axis cylinder guideway
7.Complete Machine
Dear customer , we factory have 5 Models pcb cnc router :
1.JC-3030(300*300mm)
2.JC-4040(400*400mm)
3.JC-5060(500*600mm)
4.JC-6060(600*600mm)
5.JC-6090(600*900mm)
Pls select the model that you need , and send inquiry to us ! we will reply you within 24 hours , thanks in advance !
Contact person : Sunny Wang
300*300mm pcb cnc router
design software--Protel99
control--NCstudio
CE approved
JC-3030 Mini pcb cnc router / pcb router machine /pcb drilling and milling machine
Technical sheet :
Features:
(optional items:Rotary axis),distinctive feature-worktable is moving back and forth
Model :
JC-3030
Machine surface :
Single/double
Worktable board :
300*300*40mm
Max .speed :
5000mm/min
Working speed :
0-3000mm/min
Working accuracy :
6-8mil
Least line diameter and least line spacing :
6-8mil
Drilling depth :
0.02-3mm
Drilling diameter :
0.4-3.175mm
Drilling holes :
40-100/min
Repeat accuracy :
0.025mm
The least error of data control drill :
0.015mm
Operation system :
WIN2000/XP
Means of communication :
PCI
Function request :
Protel PCB document can be directly put in .(gerber)
Spindle speed :
24000rpm
Spindle power :
800W/400W
Power supply :
AC210-240V
Packing:
Pack dimensions: 1200*1200*1300 mm
Net weight: 110kg (with bracket)
Gross weight: 120 kg
Applications:
Can be used for advertisement engraving, advertisement cutting, stone processing, Cu
and AL molding, mold manufacturing, wood processing, craft manufacturing, light box
cutting, building mold cutting, indoor decoration cutting, light equipment mold processing,
sign and mark manufacturing, acrylic board processing, as well as stamp cutting and
PCB cutting
for more details with other sizes or different models. please contact with us ....
1.Engraving Tools :
2.800W spindle
3.Long Men structure and Worktable
4.1.5kw Water-cooled spindle
5.Control Box
6. Y-axis cylinder guideway
7.Complete Machine
Dear customer , we factory have 5 Models pcb cnc router :
1.JC-3030(300*300mm)
2.JC-4040(400*400mm)
3.JC-5060(500*600mm)
4.JC-6060(600*600mm)
5.JC-6090(600*900mm)
Pls select the model that you need , and send inquiry to us ! we will reply you within 24 hours , thanks in advance !
Contact person : Sunny Wang
M25-H Auto Tool Changer CNC Router
M25-H Auto Tool Changer CNC Router
1.Auto tool aligning system.
2.Japan servo motor.
3.Auto oiling system
M25-H Auto Tool Changer CNC Router
features
1.China domestic vacuum pump, also can equipped with different vacuum pumps according to customers requirements.
2.The Spindle equipment is the first brand of the world, 8KW Italy HSD air cooling spindle. It is fit for engraving and cutting on density board, solid wood material.
3.New style LNC controller
4.8 tools holder, can changer the tool automatically
5.Top rank international vacuum adsorb table surface, it is made from electric wood board with high adsorb, can adsorb different materials, this material with big density(1.3-1.45g/cm), heat resisting, it can resist high temperature (115).
6.High speed, high efficient, idle speed can reach to above 35meters/min, it can reach to 20 meters/min when processing wave board, it can match 4-5 common type machines.
res
technical specifications
X Y working area
1300*2500mm
Z working area
200mm
Table structure
by suction
Power(spindle is not included)
2800W
Max traveling speed
50000mm/min
Max working speed
25000mm/min
Working voltage
AC380V/50Hz
Operation system
Taiwan LNC control system
Spindle power
3.7KW
Drive motor
servo
1.Auto tool aligning system.
2.Japan servo motor.
3.Auto oiling system
M25-H Auto Tool Changer CNC Router
features
1.China domestic vacuum pump, also can equipped with different vacuum pumps according to customers requirements.
2.The Spindle equipment is the first brand of the world, 8KW Italy HSD air cooling spindle. It is fit for engraving and cutting on density board, solid wood material.
3.New style LNC controller
4.8 tools holder, can changer the tool automatically
5.Top rank international vacuum adsorb table surface, it is made from electric wood board with high adsorb, can adsorb different materials, this material with big density(1.3-1.45g/cm), heat resisting, it can resist high temperature (115).
6.High speed, high efficient, idle speed can reach to above 35meters/min, it can reach to 20 meters/min when processing wave board, it can match 4-5 common type machines.
res
technical specifications
X Y working area
1300*2500mm
Z working area
200mm
Table structure
by suction
Power(spindle is not included)
2800W
Max traveling speed
50000mm/min
Max working speed
25000mm/min
Working voltage
AC380V/50Hz
Operation system
Taiwan LNC control system
Spindle power
3.7KW
Drive motor
servo
M25-X Woodworking CNC Router
1. Woodworking CNC router
2. High precision and speed
3. Strong structure
4. CE; ISO9001 certificated
5. one year guarantee
Performance Characteristics:
M25-X Woodworking CNC Router
1. High Speed Processing: Same curve speed and beeline speed, running speed can reach at 35meters/min.
2. Excellent Parts: Adopt ball bearing threading bar made in Germany; imported beeline guide way; imported bearing principle axis motor with large power.
Reasonable Design: Adopt advanced dual gear axis and rack for transmission, rapid speed and large force.
3. Software Compatibility: CAD/CAM design manufacturing software is compatible with type3/Artcam/Castmate
4. Simple Operation and Control: Adopt USB interface DSP operation system, complete offline working, not occupying any computer resource and can realize DSP self start and stop.
5. Excellent Performance:
1) Humanized design with continuous carving for breaking point, renew for power off, forecast for processing time and so on.
2) Steel structure, no deformation, firm
3) Automatic lubricating system for pouring oil, simple maintenance
4) Independent cabinet operation system
Application
Range
:
1. Woodworking Industry: stereo wave board processing, wooden door, screen, technique fan window processing, various furniture product auxiliary processing.
2. Ad Industry: Ad label, logon manufacture, acrylic cutting, plastic suction for making ad dedication. 3. Mold Industry: Apply for carving metal mold such as copper, aluminum, iron and some nonmetal mold including marble, plastic board, wooden board and so on.
4. Other Industry: Carve various shadow carving, basso-relievo. Apply in craftwork gift industry.
Working plate size
2500×1440mm
Travelling schedule
1300×550mm
Resolution
0.025mm
Spindle power
4.5kw
Power supply
AC380V/50Hz
Operation speed
35m/min
Spindle speed
24000r/min
Feeding height
200mm
Tool handle diameter
6 ,12.7
Carving instructions
HPGL/Goode
Payment: 30%L/C,T/T + 70% Balance before shipment
2. High precision and speed
3. Strong structure
4. CE; ISO9001 certificated
5. one year guarantee
Performance Characteristics:
M25-X Woodworking CNC Router
1. High Speed Processing: Same curve speed and beeline speed, running speed can reach at 35meters/min.
2. Excellent Parts: Adopt ball bearing threading bar made in Germany; imported beeline guide way; imported bearing principle axis motor with large power.
Reasonable Design: Adopt advanced dual gear axis and rack for transmission, rapid speed and large force.
3. Software Compatibility: CAD/CAM design manufacturing software is compatible with type3/Artcam/Castmate
4. Simple Operation and Control: Adopt USB interface DSP operation system, complete offline working, not occupying any computer resource and can realize DSP self start and stop.
5. Excellent Performance:
1) Humanized design with continuous carving for breaking point, renew for power off, forecast for processing time and so on.
2) Steel structure, no deformation, firm
3) Automatic lubricating system for pouring oil, simple maintenance
4) Independent cabinet operation system
Application
Range
:
1. Woodworking Industry: stereo wave board processing, wooden door, screen, technique fan window processing, various furniture product auxiliary processing.
2. Ad Industry: Ad label, logon manufacture, acrylic cutting, plastic suction for making ad dedication. 3. Mold Industry: Apply for carving metal mold such as copper, aluminum, iron and some nonmetal mold including marble, plastic board, wooden board and so on.
4. Other Industry: Carve various shadow carving, basso-relievo. Apply in craftwork gift industry.
Working plate size
2500×1440mm
Travelling schedule
1300×550mm
Resolution
0.025mm
Spindle power
4.5kw
Power supply
AC380V/50Hz
Operation speed
35m/min
Spindle speed
24000r/min
Feeding height
200mm
Tool handle diameter
6 ,12.7
Carving instructions
HPGL/Goode
Payment: 30%L/C,T/T + 70% Balance before shipment
MARS ZS1613V cnc router
MARS ZS1613V cnc router
1.Japan SERVO SYSTEM
2.imported ball-screw rail for X,Y
3.Famous brand spindle
4.high precision gui
MARS ZS1613V cnc router
Performance features:
Imported ball-screw rail for X,Y axis, and importe
d guide rail, strong carrying capacity, steady running, high precision, good durability
Famous brand spindle motor and inverter, good performance, big moment of force and high efficiency
High speed motor and driver, double-motor drive Y axis with faster speed and stronger stability
Software compatibility, compatible with type3 / artcam/ castmate/CASA/UG/Pro-E/Mastercam/Ucancam V8 and so on.
Strong expansion properties: it is available to select DSP or PCIMC(NAIKY) control, servo motor, HSD spindle from Italy, dust collector, vacuum holding down system, Auto tool-changes device, rotary parts
Application materials:
Printing industry, jewelry decoration, seal, MDF board, PVC board, architectural models, handicrafts, instrumentpanel, small industrial and so on
Application field
Archaized furniture, fold screen, sold wooden door, art craft wooden door, non-painted door, fan and windows, sorts of table and board furniture, advertisement sign, acrylic, copper, aluminum ,plastic board, wooden board and other non-metal models.
1.Japan SERVO SYSTEM
2.imported ball-screw rail for X,Y
3.Famous brand spindle
4.high precision gui
MARS ZS1613V cnc router
Performance features:
Imported ball-screw rail for X,Y axis, and importe
d guide rail, strong carrying capacity, steady running, high precision, good durability
Famous brand spindle motor and inverter, good performance, big moment of force and high efficiency
High speed motor and driver, double-motor drive Y axis with faster speed and stronger stability
Software compatibility, compatible with type3 / artcam/ castmate/CASA/UG/Pro-E/Mastercam/Ucancam V8 and so on.
Strong expansion properties: it is available to select DSP or PCIMC(NAIKY) control, servo motor, HSD spindle from Italy, dust collector, vacuum holding down system, Auto tool-changes device, rotary parts
Application materials:
Printing industry, jewelry decoration, seal, MDF board, PVC board, architectural models, handicrafts, instrumentpanel, small industrial and so on
Application field
Archaized furniture, fold screen, sold wooden door, art craft wooden door, non-painted door, fan and windows, sorts of table and board furniture, advertisement sign, acrylic, copper, aluminum ,plastic board, wooden board and other non-metal models.
MC-1325H smart cnc router
cnc router
1.1300*2500*150mm
2Spindle :3kw water-cooled
3.Fast speed,vigorous cutting strenth
4.Best quality,good price
Technical Specifications of MC-1325H cnc router
Description
Parameter
X,Y,Z Working Area
1300x2500x150mm
Table Size
1370×3000mm
X,Y,Z Traveling Positioning Accuracy
±0.01/300mm
X,Y,Z repositioning Positioning Accuracy
±0.03mm
Lathe Structure
Whole set welded structure
X, Y Structure
Import high speed rolling ball screw transmitting system, Shaft Linear Bearings
Z Structure
Import high speed rolling ball screw transmitting system, Shaft Linear Bearings
Table Type
Aluminum T-slot
Table Overlay
Option PMMA or PVC
Max .Consume power
5.0Kw
Max. Traveling Speed
0-8000mm/min
Max .Working Speed
0-8000mm/min
Spindle Power Motor
3kw(3KW-4.5KW Optional)
Spindle Speed
6000-24000RPM()
Working Mode
Stepper or Servo
Working Voltage
AC220V/50/60Hz,1PH (Option: 380V,3PH)
Command
G-Code, eng, nc, tap, etc...
Operating System
DSP or NcStudio System
Interface
USB or Cable line
Flash Memory
32MB (Option 64~256M) or Unlimited
(RE. H.D.D)
Collets
ER11
Cutter
3.17/4/6/8
Format of Instructions
G-code,HPGL,ENG,TAP,Type3/Artcam/Castmate/Proe/UG/Artcut
X,Y Working Delicacy
<0.01mm
Software
(Option Wentai , Type3 ,JDpaint)
Running circumstance
Temperature:-10 ~ 45 Relative humidity: 30% ~ 75%
Packing Size
1600x3210x1680mm
Net Weight
600kg
Weight
750Kg
MC-1325H smart cnc router features:
1. The z bearing can be fixed with 1 main spindle motors. And it can be changed quatities and power of the motor according to inquires of customer.
2. The frame of the machine is make from high quality steel with integral casting technology.
3. Excellent two-bolt pole made in Germany and sideways imported from Japan or Korea.
4. One machine can complete much work which could largely improve the working efficiency and saveworking input.
5. More advanced DSP digit-control system,handle operation and large liquid crystal display brings out more convenient operation,simpler maintenance and much more human nature on the machine.
6. Unique intelligent calculation fully develops the potential of the engine and leads to high speed processing,the synchroni-zation of curves and straight lines,smoother curves.
7. Unique and dynamic renewal ability of the system made the performance more efficient.
8. Large internal memory capacity can store more then 30 processing files simultaneously and open and process any of them.
9. Connection with tie computer via USB interface enables data to be transmitted in a second,supports hot plug and play,in the system (Window98/2000/xp).
10. More compatible:it is compatible with such CAD/CAM software liketype3/artcam/castmate/proe/UG/Artcut etc.
11. It is able to go on engraving when the electricity is cut or the tool is broken.
12.Having applications in the large amount process: handwork or relief especially for the mahogany furniture with old fashion.
1.1300*2500*150mm
2Spindle :3kw water-cooled
3.Fast speed,vigorous cutting strenth
4.Best quality,good price
Technical Specifications of MC-1325H cnc router
Description
Parameter
X,Y,Z Working Area
1300x2500x150mm
Table Size
1370×3000mm
X,Y,Z Traveling Positioning Accuracy
±0.01/300mm
X,Y,Z repositioning Positioning Accuracy
±0.03mm
Lathe Structure
Whole set welded structure
X, Y Structure
Import high speed rolling ball screw transmitting system, Shaft Linear Bearings
Z Structure
Import high speed rolling ball screw transmitting system, Shaft Linear Bearings
Table Type
Aluminum T-slot
Table Overlay
Option PMMA or PVC
Max .Consume power
5.0Kw
Max. Traveling Speed
0-8000mm/min
Max .Working Speed
0-8000mm/min
Spindle Power Motor
3kw(3KW-4.5KW Optional)
Spindle Speed
6000-24000RPM()
Working Mode
Stepper or Servo
Working Voltage
AC220V/50/60Hz,1PH (Option: 380V,3PH)
Command
G-Code, eng, nc, tap, etc...
Operating System
DSP or NcStudio System
Interface
USB or Cable line
Flash Memory
32MB (Option 64~256M) or Unlimited
(RE. H.D.D)
Collets
ER11
Cutter
3.17/4/6/8
Format of Instructions
G-code,HPGL,ENG,TAP,Type3/Artcam/Castmate/Proe/UG/Artcut
X,Y Working Delicacy
<0.01mm
Software
(Option Wentai , Type3 ,JDpaint)
Running circumstance
Temperature:-10 ~ 45 Relative humidity: 30% ~ 75%
Packing Size
1600x3210x1680mm
Net Weight
600kg
Weight
750Kg
MC-1325H smart cnc router features:
1. The z bearing can be fixed with 1 main spindle motors. And it can be changed quatities and power of the motor according to inquires of customer.
2. The frame of the machine is make from high quality steel with integral casting technology.
3. Excellent two-bolt pole made in Germany and sideways imported from Japan or Korea.
4. One machine can complete much work which could largely improve the working efficiency and saveworking input.
5. More advanced DSP digit-control system,handle operation and large liquid crystal display brings out more convenient operation,simpler maintenance and much more human nature on the machine.
6. Unique intelligent calculation fully develops the potential of the engine and leads to high speed processing,the synchroni-zation of curves and straight lines,smoother curves.
7. Unique and dynamic renewal ability of the system made the performance more efficient.
8. Large internal memory capacity can store more then 30 processing files simultaneously and open and process any of them.
9. Connection with tie computer via USB interface enables data to be transmitted in a second,supports hot plug and play,in the system (Window98/2000/xp).
10. More compatible:it is compatible with such CAD/CAM software liketype3/artcam/castmate/proe/UG/Artcut etc.
11. It is able to go on engraving when the electricity is cut or the tool is broken.
12.Having applications in the large amount process: handwork or relief especially for the mahogany furniture with old fashion.
MD-1224 wood CNC router
MD-1224 wood CNC router
1.higher precision and efficency
2.stable performace
3.newest style, low price
MD-1224 wood CNC router
Main features
1.
Italy well-known air cooling spindle, high precision, long life time, steady working easy to start up.
2.
Thicken square pipe structure, well welded, no distortion for whole structure.
3.
Adopt imported square orbit, double slippers, bearing heavy working steadily, high precision, and long life time.
4.
DSP controller system with USB interface, working without connecting with computer during and easy to control.
5.
Software: CAD/CAM designing software. Use designing software such as Type3, Artcam, Castmate, Hcwy, Wentai etc.
6.
Vacuum table with 6 vacuum zones, which can adsorb different sizes materials. Options for vacuum pump made in China or NO-oil vacuum pump made in Germany. It has auto oiling system, easy to operate through pressing the key.
7.
Adopt high speed stepper motor and drivers, and two motors for Y axis. Max speed is 36m/min. Auto Aligning System.
Applicable Industries:
Furniture industry, solid wood furniture, solid wood doors, decorative materials, computer tables, panel furniture, office furniture, wooden speaker and kitchenware, etc. It also can process automobile mould and non-metallic mould.
Technical parameter
Index
Index
Parameter
Optional
Travel
X Travel
1500mm
<2500mm
Y Travel
3000mm
<5500mm
Z Travel
200mm
<700mm
Precision
Working Precision
0.04mm
Reposition
0.05mm
Structure
Table Structure
Vacuum Adsorption (PF)
Strip Adsorption
X,Y,Z Structure
X,Y Gear. Z Screw Rod
Speed
Max Air Line Speed
45000mm/min
Max Working Speed
20000 mm/min
Spindle
Spindle Power
3.0KW
3/4.5/6KW
Running Speed
0-18000r/min
Table Size
1440*2915mm
Made of Operation
Stepper
Servo
Working Voltage
AC380/50Hz
AC220/50Hz
Dictate of Operation
G code
Operating System
DSP Hcwy system
Servo
Net Weight
1600kg
Gross Weight
1900kg
1.higher precision and efficency
2.stable performace
3.newest style, low price
MD-1224 wood CNC router
Main features
1.
Italy well-known air cooling spindle, high precision, long life time, steady working easy to start up.
2.
Thicken square pipe structure, well welded, no distortion for whole structure.
3.
Adopt imported square orbit, double slippers, bearing heavy working steadily, high precision, and long life time.
4.
DSP controller system with USB interface, working without connecting with computer during and easy to control.
5.
Software: CAD/CAM designing software. Use designing software such as Type3, Artcam, Castmate, Hcwy, Wentai etc.
6.
Vacuum table with 6 vacuum zones, which can adsorb different sizes materials. Options for vacuum pump made in China or NO-oil vacuum pump made in Germany. It has auto oiling system, easy to operate through pressing the key.
7.
Adopt high speed stepper motor and drivers, and two motors for Y axis. Max speed is 36m/min. Auto Aligning System.
Applicable Industries:
Furniture industry, solid wood furniture, solid wood doors, decorative materials, computer tables, panel furniture, office furniture, wooden speaker and kitchenware, etc. It also can process automobile mould and non-metallic mould.
Technical parameter
Index
Index
Parameter
Optional
Travel
X Travel
1500mm
<2500mm
Y Travel
3000mm
<5500mm
Z Travel
200mm
<700mm
Precision
Working Precision
0.04mm
Reposition
0.05mm
Structure
Table Structure
Vacuum Adsorption (PF)
Strip Adsorption
X,Y,Z Structure
X,Y Gear. Z Screw Rod
Speed
Max Air Line Speed
45000mm/min
Max Working Speed
20000 mm/min
Spindle
Spindle Power
3.0KW
3/4.5/6KW
Running Speed
0-18000r/min
Table Size
1440*2915mm
Made of Operation
Stepper
Servo
Working Voltage
AC380/50Hz
AC220/50Hz
Dictate of Operation
G code
Operating System
DSP Hcwy system
Servo
Net Weight
1600kg
Gross Weight
1900kg
MDF CNC Router SHM1325A
MDF CNC Router is used for wood working or sign making.You can use vacuum system to fix the materials on the top of table.
We are the professional manufacturer of MDF CNC Router in China and we have some distributors in different countries. If you are interested in our products, please do not hesitate to contact with us
Specifications:
1 X, Y, Z working area: 1,260 x 2,480 x 200mm
2 Table size: 1,440 x 3,040mm
3 X, Y, Z traveling positioning accuracy: ±0.03/300mm
4 X, Y, Z repositioning positioning accuracy: ±0.05mm
5 Frame structure welded structure
6 X-Y structure gear wheel transmission: shaft linear bearings
7 Z structure: ball screw shaft linear bearings
8 Max. power consumption: 5.0kW
9 Max. speed: 0 - 32,000mm/min
10 Max. working speed: 0 - 20,000mm/min
11 Spindle power motor: 2.0Kw/3.0Kw HSD spindle
12 Spindle speed: 0-18,000rpm
13 Drive motor: stepper
14 Working voltage: AC220V/50/60Hz, 1PH option: 380V, 3PH)
15 Command code: G code, *uoo, *mmg, *plt
16 Operating system: DSP system (option: Mach3 PC system)
17 Computer interface: USB
18 Flash memory: 32MB
19 Collet: ER25
20 X-Y-Z working accuracy: <0.01mm
21 Software: Ucancam software, Type3 software, Artcam software(Option)
22 Running circumstance temperature: 0 - 45°C
23 Relative humidity: 30% - 75%
All parameters above are subject to change without prior notice
Packing:
Separated: 3,200 x 1,960 x 1,340mm
Integrated: 200 x 1,960 x 1,870mm
N.W.: 900kg G.W.: 1,150kg
We are the professional manufacturer of MDF CNC Router in China and we have some distributors in different countries. If you are interested in our products, please do not hesitate to contact with us
Specifications:
1 X, Y, Z working area: 1,260 x 2,480 x 200mm
2 Table size: 1,440 x 3,040mm
3 X, Y, Z traveling positioning accuracy: ±0.03/300mm
4 X, Y, Z repositioning positioning accuracy: ±0.05mm
5 Frame structure welded structure
6 X-Y structure gear wheel transmission: shaft linear bearings
7 Z structure: ball screw shaft linear bearings
8 Max. power consumption: 5.0kW
9 Max. speed: 0 - 32,000mm/min
10 Max. working speed: 0 - 20,000mm/min
11 Spindle power motor: 2.0Kw/3.0Kw HSD spindle
12 Spindle speed: 0-18,000rpm
13 Drive motor: stepper
14 Working voltage: AC220V/50/60Hz, 1PH option: 380V, 3PH)
15 Command code: G code, *uoo, *mmg, *plt
16 Operating system: DSP system (option: Mach3 PC system)
17 Computer interface: USB
18 Flash memory: 32MB
19 Collet: ER25
20 X-Y-Z working accuracy: <0.01mm
21 Software: Ucancam software, Type3 software, Artcam software(Option)
22 Running circumstance temperature: 0 - 45°C
23 Relative humidity: 30% - 75%
All parameters above are subject to change without prior notice
Packing:
Separated: 3,200 x 1,960 x 1,340mm
Integrated: 200 x 1,960 x 1,870mm
N.W.: 900kg G.W.: 1,150kg
MDF CNC Router SHMS1325C
MDF CNC Router SHMS1325C is used for wood working factory. It can change the tools automatically and also have the tool sensor.
Item
SHMS1325C
Working area
1300*2500*200 mm
Table Size
1260*2500 mm
Transmission
X,Y with linear guide Z with.Ball screw (Option : JapaneseTHK Linear rail )
Table structure
Vacuum table in zones ( Option: T-Slot vacuum table )
Spindle
9.0 KW Italian HSD Spindle
Spindle speed
24000 rpm/min
Speed
MAX travelling speed :45000 mm/min
MAX working speed :20000 mm/min
Driver and Motors
Delta servo drivers and motors from Taiwan
Working voltage
AC380V/3PH/50Hz (Option : AC220V/3PH/50Hz )
Operating system
Syntec from Taiwan (Option : OSAI )
Net weight
1200 KG
Gross weight
1350 KG
Item
SHMS1325C
Working area
1300*2500*200 mm
Table Size
1260*2500 mm
Transmission
X,Y with linear guide Z with.Ball screw (Option : JapaneseTHK Linear rail )
Table structure
Vacuum table in zones ( Option: T-Slot vacuum table )
Spindle
9.0 KW Italian HSD Spindle
Spindle speed
24000 rpm/min
Speed
MAX travelling speed :45000 mm/min
MAX working speed :20000 mm/min
Driver and Motors
Delta servo drivers and motors from Taiwan
Working voltage
AC380V/3PH/50Hz (Option : AC220V/3PH/50Hz )
Operating system
Syntec from Taiwan (Option : OSAI )
Net weight
1200 KG
Gross weight
1350 KG
MF30 mobile Wi-Fi router connects to the Next G Network With HSUPA 7.2Mbps downlink 5.7 Mbps uplink it supports up
1.MF30 Router, ZTE MF30 mobile hotspot features HSUPA 7.2Mbps downlink 5.7 Mbps uplink
2.MF30 Router(Small multifunctional USB
MF30
Router,
ZTE MF30
mobile hotspot features HSUPA 7.2Mbps downlink, 5.7 Mbps uplink
Main features:
This HSUPA device is peak rated at 7.2 Mbps* downlink speed.
Operates on the
Telstra
Next G™ Network for wireless access to e-mail and internet on the move.
The
MF30
uses 802.11b/g Wi-Fi connection so no installation is required. Simply enter the password key supplied and get on line immediately with your pre-paid Next G™ SIM.
Small, lightweight design.
Four LED status indicators.
Technical Specifications:
Device Specifications
>HSDPA/HSUPA/UMTS 850/1900/2100 MHz
>GSM/GPRS/EDGE 850/900/1800/1900 MHz
>HSDPA Downlink 7.2 Mbps, Uplink 5.76 Mbps
>802.11b/g compatible with any Wi-Fi enabled device
>Compact size 99.7 x 54 x 14.9 mm
>Weight 75g
>1500mAh battery gives up to 4 hours use
>Maximum Emitted Power 2.95W/m2 in GSM 900MHz mode.
Actual speeds will be less. Speeds may vary due to congestion, distance from the cell, local conditions, hardware, software and other factors.
2.MF30 Router(Small multifunctional USB
MF30
Router,
ZTE MF30
mobile hotspot features HSUPA 7.2Mbps downlink, 5.7 Mbps uplink
Main features:
This HSUPA device is peak rated at 7.2 Mbps* downlink speed.
Operates on the
Telstra
Next G™ Network for wireless access to e-mail and internet on the move.
The
MF30
uses 802.11b/g Wi-Fi connection so no installation is required. Simply enter the password key supplied and get on line immediately with your pre-paid Next G™ SIM.
Small, lightweight design.
Four LED status indicators.
Technical Specifications:
Device Specifications
>HSDPA/HSUPA/UMTS 850/1900/2100 MHz
>GSM/GPRS/EDGE 850/900/1800/1900 MHz
>HSDPA Downlink 7.2 Mbps, Uplink 5.76 Mbps
>802.11b/g compatible with any Wi-Fi enabled device
>Compact size 99.7 x 54 x 14.9 mm
>Weight 75g
>1500mAh battery gives up to 4 hours use
>Maximum Emitted Power 2.95W/m2 in GSM 900MHz mode.
Actual speeds will be less. Speeds may vary due to congestion, distance from the cell, local conditions, hardware, software and other factors.
MINI 6040 CNC router for metal
Mini CNC router
Metal CNC engraving machine
CE&FDA
It is applicable to the industries of artwork processing, advertising and stamp making
EM-1212 CNC ENGRAVER
Functional Index Standard Value
Working Area 1550×1320mm
Travel of Engraving 1200×1200×90mm
Maximum Engraving Speed 6000mm/min
Power of Spindle Frequency changing 1500W
Rotational Speed of Spindle 6000~24000rpm
Manner of receiving Data USB Interface
Capacity of memory 32M
Format of Instructions G code or HPGL
Cutter Ø3.175 or Ø 6.00mm
Power Supply AC220/50HZ
Electric Power 600W
Driving System Stepper
Weight 420KG
Metal CNC engraving machine
CE&FDA
It is applicable to the industries of artwork processing, advertising and stamp making
EM-1212 CNC ENGRAVER
Functional Index Standard Value
Working Area 1550×1320mm
Travel of Engraving 1200×1200×90mm
Maximum Engraving Speed 6000mm/min
Power of Spindle Frequency changing 1500W
Rotational Speed of Spindle 6000~24000rpm
Manner of receiving Data USB Interface
Capacity of memory 32M
Format of Instructions G code or HPGL
Cutter Ø3.175 or Ø 6.00mm
Power Supply AC220/50HZ
Electric Power 600W
Driving System Stepper
Weight 420KG
30PCS Router Bit Set
30PCS Router Bit Set
Straight Bit 5mm,6mm,8mm,10mm,12mm;4mm,16mm,18mm,20mm;
Dovetail Bit 12.7mm;Cove Box Bit R3.17mm,R6.35mm
30PCS Router Bit Set
Specifications:
Each set consists of one piece of the following size:
Straight Bit 5mm,6mm,8mm,10mm,12mm
Straight Bit 4mm,16mm,18mm,20mm
Dovetail Bit 12.7mm
60°V Grooving Bit 9.5mm
90° Grooving Bit 12.7mm
Cove Box Bit R3.17mm,R6.35mm
Classical Bit R2.5mm
Flush Trim Bit 12.7mm
25°Chamfer Bit 16mm
45°Chamfer Bit 32mm
Roman Ogee Bit R4mm
Rabbeting Bit 28.6mm
Cove Bit R6.35mm,R9.5mm
Rounding Over Bit R3.2mm,R6.35mm,R7.9mm,R9.5mm
Beading Bit R3.2mm,R6.35mm,R7.9mm,R9.5mm
Straight Bit 5mm,6mm,8mm,10mm,12mm;4mm,16mm,18mm,20mm;
Dovetail Bit 12.7mm;Cove Box Bit R3.17mm,R6.35mm
30PCS Router Bit Set
Specifications:
Each set consists of one piece of the following size:
Straight Bit 5mm,6mm,8mm,10mm,12mm
Straight Bit 4mm,16mm,18mm,20mm
Dovetail Bit 12.7mm
60°V Grooving Bit 9.5mm
90° Grooving Bit 12.7mm
Cove Box Bit R3.17mm,R6.35mm
Classical Bit R2.5mm
Flush Trim Bit 12.7mm
25°Chamfer Bit 16mm
45°Chamfer Bit 32mm
Roman Ogee Bit R4mm
Rabbeting Bit 28.6mm
Cove Bit R6.35mm,R9.5mm
Rounding Over Bit R3.2mm,R6.35mm,R7.9mm,R9.5mm
Beading Bit R3.2mm,R6.35mm,R7.9mm,R9.5mm
MINI HSUPA WIFI 3G router--MH-G3R
MINI HSUPA WIFI 3G router--G3R
1.play&share
2.HSUPA, high speed.
3.Bothway for WAN & LAN
MH81 Hotspot Product Specification
3G/2G
Technical Standard
HSUPA
3GPP Release6, up to 5.76M bps UL,category 6
HSDPA
3GPP Release6, up to 7.2M bps DL,category 7/8
UMTS
3GPP Release4, up to 384 Kbps DL and UL
EDGE
3GPP Release4, Multislot class 12, up to 237 Kbps
GPRS
3GPP Release4, Multislot class 10, up to 85.6Kbps
3G/2G
Frequency Band
GSM/GPRS/EDGE
850/900/1800/1900 MHz
UMTS/HSPA
1) 2100MHz
2) 850/1900 MHz(Optional)
WiFi
Frequency Band
2.4GHz
802.11b/g
Up to 54Mbps
Data Transmission Speed
802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps
802.11b: 1, 2, 5.5, 11Mbps
Encryption
WEP Encryption, 64/128 bits
WPA, WPA2
+ Authentication: 802.1x, Pre-Shared Key (PSK)
+ Encryption: AES, TKIP
SSID
Single SSID Broadcast
WPS
Supported
User amount
max to 5
Antenna
3G/2G Main Antenna
1, Internal
3G Rx Diversity Antenna
1, Internal
WiFi Antenna
1, Internal,
External Interface
micro USB
1, Charger, Debug
USIM/SIM Card Slot
1, embeded in battery box
Micro-SD Card Slot
1, embeded in battery box
Function Button
Power
1
WiFi/WPS
1
Reset
1
State Indicator
Power
1
WIFI/WPS
1
3G Signal
1
3G/2G Network
1
Gateway
TCP/IP
Supported
UDP
Supported
DHCP Server
Supported
NAT/NAPT
Supported
DNS Relay
Supported
SNTP
Supported
UPnP
Supported
DMZ
Supported
MAC/URL/IP filter
Supported
VPN Passthrough
Supported
Firmware Update
Support via web
Battery
Lion Battery
1500mAH,
1)Working time 4Hours
2)Standby time 20Hours
Parameters
Dimension (mm)
95 × 51× 13.5
Weight (g)
60
Environment
Operation Temperature
0 to 50°C
Operation Humidity
10% to 90%
Storage Temperature
-10 to 70°C
Storage Humidity
5% to 95%
Certification
CE
Supported
ROHS
Supported
Other
Could be supported upon requested
Standard Package Contents
3G Hotspot
1
User Guide
1
Charger
1
Other
1.play&share
2.HSUPA, high speed.
3.Bothway for WAN & LAN
MH81 Hotspot Product Specification
3G/2G
Technical Standard
HSUPA
3GPP Release6, up to 5.76M bps UL,category 6
HSDPA
3GPP Release6, up to 7.2M bps DL,category 7/8
UMTS
3GPP Release4, up to 384 Kbps DL and UL
EDGE
3GPP Release4, Multislot class 12, up to 237 Kbps
GPRS
3GPP Release4, Multislot class 10, up to 85.6Kbps
3G/2G
Frequency Band
GSM/GPRS/EDGE
850/900/1800/1900 MHz
UMTS/HSPA
1) 2100MHz
2) 850/1900 MHz(Optional)
WiFi
Frequency Band
2.4GHz
802.11b/g
Up to 54Mbps
Data Transmission Speed
802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps
802.11b: 1, 2, 5.5, 11Mbps
Encryption
WEP Encryption, 64/128 bits
WPA, WPA2
+ Authentication: 802.1x, Pre-Shared Key (PSK)
+ Encryption: AES, TKIP
SSID
Single SSID Broadcast
WPS
Supported
User amount
max to 5
Antenna
3G/2G Main Antenna
1, Internal
3G Rx Diversity Antenna
1, Internal
WiFi Antenna
1, Internal,
External Interface
micro USB
1, Charger, Debug
USIM/SIM Card Slot
1, embeded in battery box
Micro-SD Card Slot
1, embeded in battery box
Function Button
Power
1
WiFi/WPS
1
Reset
1
State Indicator
Power
1
WIFI/WPS
1
3G Signal
1
3G/2G Network
1
Gateway
TCP/IP
Supported
UDP
Supported
DHCP Server
Supported
NAT/NAPT
Supported
DNS Relay
Supported
SNTP
Supported
UPnP
Supported
DMZ
Supported
MAC/URL/IP filter
Supported
VPN Passthrough
Supported
Firmware Update
Support via web
Battery
Lion Battery
1500mAH,
1)Working time 4Hours
2)Standby time 20Hours
Parameters
Dimension (mm)
95 × 51× 13.5
Weight (g)
60
Environment
Operation Temperature
0 to 50°C
Operation Humidity
10% to 90%
Storage Temperature
-10 to 70°C
Storage Humidity
5% to 95%
Certification
CE
Supported
ROHS
Supported
Other
Could be supported upon requested
Standard Package Contents
3G Hotspot
1
User Guide
1
Charger
1
Other
ML1700E Series Security Router
Router
1.Brand New and 100%genuine
2.Good Price
3.Fast Delivery
4.1Year Standard Warranty
The ML1700E series modular security router is a small network access router for WAN small size end access. The ML1700E router adopts fixed and modular integration structure. It provides a robust and low-cost 1700 series router solution for customers. It offers packet-forwarding capability with 40Kpps throughput and applies to small branch access and ATM access.
The ML1700E router integrates routing, VoIP, security, transmission, network management and video network applications satisfying a variety of customer requirements. The router supports SNA/DLSw, VoIP, VPN and MPLS application technologies, and backup and QoS features.
You are welcome to inquiry us!
1.Brand New and 100%genuine
2.Good Price
3.Fast Delivery
4.1Year Standard Warranty
The ML1700E series modular security router is a small network access router for WAN small size end access. The ML1700E router adopts fixed and modular integration structure. It provides a robust and low-cost 1700 series router solution for customers. It offers packet-forwarding capability with 40Kpps throughput and applies to small branch access and ATM access.
The ML1700E router integrates routing, VoIP, security, transmission, network management and video network applications satisfying a variety of customer requirements. The router supports SNA/DLSw, VoIP, VPN and MPLS application technologies, and backup and QoS features.
You are welcome to inquiry us!
ML2000-104 Series Multi-Service CPE Router
Router
1.Brand New and 100%genuine
2.Good Price
3.Fast Delivery
4.1Year Standard Warranty
ML2000-104A/B is a new generation Full Service CPE (Customer Premises Equipment) used in customer's side of operator network such as MPLS, Metro E, VPLS and FTTH. MP2000-104A/B adopts new design to combine CPE router, CPE Voice Gateway, CPE security device into one box with full range of management features inside. This innovation enables Service Providers to reduce the total cost of equipment and huge management works for large numbers of CPE boxes in customer side.
You are welcome to inquiry us!
1.Brand New and 100%genuine
2.Good Price
3.Fast Delivery
4.1Year Standard Warranty
ML2000-104A/B is a new generation Full Service CPE (Customer Premises Equipment) used in customer's side of operator network such as MPLS, Metro E, VPLS and FTTH. MP2000-104A/B adopts new design to combine CPE router, CPE Voice Gateway, CPE security device into one box with full range of management features inside. This innovation enables Service Providers to reduce the total cost of equipment and huge management works for large numbers of CPE boxes in customer side.
You are welcome to inquiry us!
ML2700 Series Broadband-Narrowband Router
Router
1.Brand New and 100%genuine
2.Good Price
3.Fast Delivery
4.1Year Standard Warranty
The ML2700 router series comprises ML2700-8, ML2700-16 ML2700-24, ML2700-8B, ML2700-16B and ML2700-24B. The series integrates routing, switching, security, VoIP, transmission, local storage and wireless functions.
The Multi-service Edge Intelligent Network (MEIN) technology integrates broadband and narrowband features in the router. The series supports 100Kpps throughput from LAN-to-WAN and 148Kpps from LAN-to-LAN.
1.Brand New and 100%genuine
2.Good Price
3.Fast Delivery
4.1Year Standard Warranty
The ML2700 router series comprises ML2700-8, ML2700-16 ML2700-24, ML2700-8B, ML2700-16B and ML2700-24B. The series integrates routing, switching, security, VoIP, transmission, local storage and wireless functions.
The Multi-service Edge Intelligent Network (MEIN) technology integrates broadband and narrowband features in the router. The series supports 100Kpps throughput from LAN-to-WAN and 148Kpps from LAN-to-LAN.
ML2800 Series Broadband-Narrowband Router
Router
1.Brand New and 100%genuine
2.Good Price
3.Fast Delivery
4.1Year Standard Warranty
This router series (ML2804, ML2806, ML2816, ML2818 and ML2824) integrates routing, switching, security, VoIP, transmission, local storage and wireless functions. The router integrates the Multi-service Edge Intelligent Network (MEIN) technology boost businesses.
The series adopts fixed and modular structure, and provides broadband & narrowband, multi-service and intelligent solutions for users. The series has 100M packet-forwarding capacity from LAN to WAN.
The router provides many software features such as SNA/DLSw, VoIP, VPN, MPLS, multicast, MAC address binding, and access control and bandwidth restriction. The series provides backup schemes and QoS features. It can be applied to multiple services such as data, video and voice.
1.Brand New and 100%genuine
2.Good Price
3.Fast Delivery
4.1Year Standard Warranty
This router series (ML2804, ML2806, ML2816, ML2818 and ML2824) integrates routing, switching, security, VoIP, transmission, local storage and wireless functions. The router integrates the Multi-service Edge Intelligent Network (MEIN) technology boost businesses.
The series adopts fixed and modular structure, and provides broadband & narrowband, multi-service and intelligent solutions for users. The series has 100M packet-forwarding capacity from LAN to WAN.
The router provides many software features such as SNA/DLSw, VoIP, VPN, MPLS, multicast, MAC address binding, and access control and bandwidth restriction. The series provides backup schemes and QoS features. It can be applied to multiple services such as data, video and voice.
ML3700 Series Large-scale Edge Aggregation Router
Router
1.Brand New and 100%genuine
2.Good Price
3.Fast Delivery
4.1Year Standard Warranty
The ML3700 series large-scale edge aggregation router facilitates large-scale and small-scale WAN aggregation and uplink, apart from providing large-scale Internet access platforms such as ML3740 and ML3780.
The router equips with four/eight MIMs and supports 64-port E1 interface access. Currently, it possesses 600K to 1Mpps packet-forwarding capability. The modular design comprises 2GE optical/electric Ethernet interface on main control board facilitating MIM and ultimately saving customer investment.
The MyPower-R software extends network and link protocol, route and backup protocol, network security service, IP multicast protocol, SNA/DLSw function, QoS feature and network management protocol. It supports BGP edge gateway protocol and MPLS function the PE node in network.
1.Brand New and 100%genuine
2.Good Price
3.Fast Delivery
4.1Year Standard Warranty
The ML3700 series large-scale edge aggregation router facilitates large-scale and small-scale WAN aggregation and uplink, apart from providing large-scale Internet access platforms such as ML3740 and ML3780.
The router equips with four/eight MIMs and supports 64-port E1 interface access. Currently, it possesses 600K to 1Mpps packet-forwarding capability. The modular design comprises 2GE optical/electric Ethernet interface on main control board facilitating MIM and ultimately saving customer investment.
The MyPower-R software extends network and link protocol, route and backup protocol, network security service, IP multicast protocol, SNA/DLSw function, QoS feature and network management protocol. It supports BGP edge gateway protocol and MPLS function the PE node in network.
ML3800 Series Aggregation Router
Router
1.Brand New and 100%genuine
2.Good Price
3.Fast Delivery
4.1Year Standard Warranty
ML3800 series router is a new service aggregation router. It is used for the county aggregation and uplink of large WAN sand city aggregation and link of small WANs, and can be used as large Internet access platform. It includes only ML3840, which has four MIMs and four SICs, and supports accessing up to 20 E1 interfaces. It has the packet forwarding capability of 600K-1Mpps.
ML3800 series router integrates the full-service aggregation theory, and provides routing, switching, security, video, VoIP and bandwidth optimizing services, realizing the smooth upgrade and extending of future network. It can provide strong aggregation capacity to meet the requirements of large-scale aggregation. It adopts modular design and integrates Gigabit optical/electric optional Ethernet interface on the control board to release functional module slots and save user investment. It uses the unified MyPower-R software, provides rich network and link protocols, routing and backup protocols, network security services, IP multicast protocol, SNA/DLSw function, QoS feature and network management protocol, and supports BGP edge gateway protocol and MPLS function. It can serve as PE node in the network.
1.Brand New and 100%genuine
2.Good Price
3.Fast Delivery
4.1Year Standard Warranty
ML3800 series router is a new service aggregation router. It is used for the county aggregation and uplink of large WAN sand city aggregation and link of small WANs, and can be used as large Internet access platform. It includes only ML3840, which has four MIMs and four SICs, and supports accessing up to 20 E1 interfaces. It has the packet forwarding capability of 600K-1Mpps.
ML3800 series router integrates the full-service aggregation theory, and provides routing, switching, security, video, VoIP and bandwidth optimizing services, realizing the smooth upgrade and extending of future network. It can provide strong aggregation capacity to meet the requirements of large-scale aggregation. It adopts modular design and integrates Gigabit optical/electric optional Ethernet interface on the control board to release functional module slots and save user investment. It uses the unified MyPower-R software, provides rich network and link protocols, routing and backup protocols, network security services, IP multicast protocol, SNA/DLSw function, QoS feature and network management protocol, and supports BGP edge gateway protocol and MPLS function. It can serve as PE node in the network.
ML7200 Series Access Core Aggregation Router
Router
1.Brand New and 100%genuine
2.Good Price
3.Fast Delivery
4.1Year Standard Warranty
The ML7200 series access core aggregation router facilitates both large-scale and small-scale WAN aggregation and uplink. The router provides large-scale Internet access platform including ML7204 and ML7208 models.
The two models separately comprise four and eight MIMs, support 64-port E1 interfaces with packet-forwarding capability between 1.5 to 2.2Mpps. The ML7200 series router design bases on the complete network investment protection theory and provides complete network investment protection. The router provides robust aggregation capability satisfying the client application requirement. The router adopts modular design, integrates 3GE optical/electric Ethernet interfaces, which utilize MIM saving the client investment.
The MyPower-R software provides network and link protocols, routing and backup protocols, network security service, IP multi-cast protocol, SNA/DLSw function, QoS features and network management protocol. The software supports BGP edge gateway protocol and MPLS, which can be used as PE node and P node.
1.Brand New and 100%genuine
2.Good Price
3.Fast Delivery
4.1Year Standard Warranty
The ML7200 series access core aggregation router facilitates both large-scale and small-scale WAN aggregation and uplink. The router provides large-scale Internet access platform including ML7204 and ML7208 models.
The two models separately comprise four and eight MIMs, support 64-port E1 interfaces with packet-forwarding capability between 1.5 to 2.2Mpps. The ML7200 series router design bases on the complete network investment protection theory and provides complete network investment protection. The router provides robust aggregation capability satisfying the client application requirement. The router adopts modular design, integrates 3GE optical/electric Ethernet interfaces, which utilize MIM saving the client investment.
The MyPower-R software provides network and link protocols, routing and backup protocols, network security service, IP multi-cast protocol, SNA/DLSw function, QoS features and network management protocol. The software supports BGP edge gateway protocol and MPLS, which can be used as PE node and P node.
Friday, August 5, 2011
ML7500 Core Router
Router
1.Brand New and 100%genuine
2.Good Price
3.Fast Delivery
4.1Year Standard Warranty
The ML7500 series router is a core aggregation router designed and developed on the lines of Advanced Telecom Computing Architecture (ATCA) for efficient large-scale WAN core aggregation and core uplink connection. It provides super large-scale Internet access platform.
The ML7500 router provides two control slots and eight MIM slots. It supports 32-port 155M interface or 256-port E1 interface with 12Mpps throughput. ML7500 incorporates four-core processors based on the technology of dual-core processors. The perfect dual-redundant or multi-redundant design guarantees high reliability of the router.
The ML7500 router adopts MyPower-R software providing routing, backup, network security service, IP multi-cast function QoS, network management function, protocols of network layer and link layer, BGP edge network gateway protocol and MPLS function. It can be used as PE or P node.
1.Brand New and 100%genuine
2.Good Price
3.Fast Delivery
4.1Year Standard Warranty
The ML7500 series router is a core aggregation router designed and developed on the lines of Advanced Telecom Computing Architecture (ATCA) for efficient large-scale WAN core aggregation and core uplink connection. It provides super large-scale Internet access platform.
The ML7500 router provides two control slots and eight MIM slots. It supports 32-port 155M interface or 256-port E1 interface with 12Mpps throughput. ML7500 incorporates four-core processors based on the technology of dual-core processors. The perfect dual-redundant or multi-redundant design guarantees high reliability of the router.
The ML7500 router adopts MyPower-R software providing routing, backup, network security service, IP multi-cast function QoS, network management function, protocols of network layer and link layer, BGP edge network gateway protocol and MPLS function. It can be used as PE or P node.
MP-1212 professional cnc router for woodworking
woodworking cnc router
1.Ato-to-exchanger
2.Double motors to drive
3.6 vacuum table-board
4.Professional and human nature
Supply cnc router of economical style
Standard features:
The cnc router has a whole steel structure which makes it works steadily designed with more human nature. This cnc router is a economical style whose ratio of performance price is high making investment economical.
Technical parameters:
NAME OF COMMODITY
CHINESE cnc router
Model
MP1212
X,Y working area
1200mm*1200mm
Z working area
>80mm(optional)
Table size
1340mm*2020mm
Max travel speed
4m-5m/min
Max engraving speed
2m-3m/min
Resolution ratio
0.005mm
Reposition accuracy
0.05mm
Max feeding height
110mm
Command
G code*.u00*.mmg*.plt
Surroundings for software
Windows98/2000/xp
Power(not include the spindle)
400W
Power
AC 220V/50Hz
Main axle power rate
1.5KW/2.2KW
Main axle rotating speed
0-24000rpm/min
Work Mode
Stepper
1.Ato-to-exchanger
2.Double motors to drive
3.6 vacuum table-board
4.Professional and human nature
Supply cnc router of economical style
Standard features:
The cnc router has a whole steel structure which makes it works steadily designed with more human nature. This cnc router is a economical style whose ratio of performance price is high making investment economical.
Technical parameters:
NAME OF COMMODITY
CHINESE cnc router
Model
MP1212
X,Y working area
1200mm*1200mm
Z working area
>80mm(optional)
Table size
1340mm*2020mm
Max travel speed
4m-5m/min
Max engraving speed
2m-3m/min
Resolution ratio
0.005mm
Reposition accuracy
0.05mm
Max feeding height
110mm
Command
G code*.u00*.mmg*.plt
Surroundings for software
Windows98/2000/xp
Power(not include the spindle)
400W
Power
AC 220V/50Hz
Main axle power rate
1.5KW/2.2KW
Main axle rotating speed
0-24000rpm/min
Work Mode
Stepper
30pcs Router Bit Set
30pcs Router Bit Set
Key Hole Bit 9.5mm;Straight Bit 4.8mm,6.8mm,9.5mm,12.7mm,15.9mm,19mm;Cove Box Bit 6.4mm,9.5mm,12.7mm
30pcs Router Bit Set
Specifications:
Each set consists of one piece of the following size:
Key Hole Bit 9.5mm
Straight Bit 4.8mm,6.8mm,9.5mm,12.7mm,15.9mm,19mm
14°Dovetail Bit 12.7mm
9°Dovetail Bit 9.5mm
Cove Box Bit 6.4mm,9.5mm,12.7mm
Flush Trim Bit with Ball Bearing 9.5mm,12.7mm
Panel Pilot Bit 6.4mm
90°V Grooving Bit 6.4mm,9.5mm,12.7mm
Cove Bit with Ball Bearing 3.2mm,4.8mm,6.4mm
T Slotting Bit 6.4mm
Round Over Bit with Ball Bearing 3.2,4.8,6.4mm
7°Bevel Trim Bit with Ball Bearing 9.5mm
Roman Ogee Bit with Ball Bearing 4.0mm
Combination Bevel Bit 25°
Classical Groove Forming Bit 19mm
Flat Bottom Round Over bit R6.4mm
Key Hole Bit 9.5mm;Straight Bit 4.8mm,6.8mm,9.5mm,12.7mm,15.9mm,19mm;Cove Box Bit 6.4mm,9.5mm,12.7mm
30pcs Router Bit Set
Specifications:
Each set consists of one piece of the following size:
Key Hole Bit 9.5mm
Straight Bit 4.8mm,6.8mm,9.5mm,12.7mm,15.9mm,19mm
14°Dovetail Bit 12.7mm
9°Dovetail Bit 9.5mm
Cove Box Bit 6.4mm,9.5mm,12.7mm
Flush Trim Bit with Ball Bearing 9.5mm,12.7mm
Panel Pilot Bit 6.4mm
90°V Grooving Bit 6.4mm,9.5mm,12.7mm
Cove Bit with Ball Bearing 3.2mm,4.8mm,6.4mm
T Slotting Bit 6.4mm
Round Over Bit with Ball Bearing 3.2,4.8,6.4mm
7°Bevel Trim Bit with Ball Bearing 9.5mm
Roman Ogee Bit with Ball Bearing 4.0mm
Combination Bevel Bit 25°
Classical Groove Forming Bit 19mm
Flat Bottom Round Over bit R6.4mm
MP-1218 3D CNC router for ads
MP1218 3D CNC router for advertising carving
1.Vacuum table
2.Good compatibility
3.A wide range of application
We supply professional MP1218 3D CNC router for advertising carving.
Specifications:
The MP1218 3D CNC router for advertising has a special application of advertising sign making, owning to its superior quality and reasonable price, our cnc machines has met with warm reception and quick sale in most Asian and European countries.
Technical parameters:
NAME OF COMMODITY
3D CNC router
Model
MP1218
X,Y working area
1200mm*1800mm
Z working area
>80mm(optional)
Table size
1340mm*2020mm
Max travel speed
4m-5m/min
Max engraving speed
2m-3m/min
Resolution ratio
0.005mm
Reposition accuracy
0.05mm
Max feeding height
110mm
Command
G code*.u00*.mmg*.plt
Surroundings for software
Windows98/2000/xp
Power(not include the spindle)
400W
Power
AC 220V/50Hz
Main axle power rate
1.5KW/2.2KW
Main axle rotating speed
0-24000rpm/min
Work Mode
Stepper
1.Vacuum table
2.Good compatibility
3.A wide range of application
We supply professional MP1218 3D CNC router for advertising carving.
Specifications:
The MP1218 3D CNC router for advertising has a special application of advertising sign making, owning to its superior quality and reasonable price, our cnc machines has met with warm reception and quick sale in most Asian and European countries.
Technical parameters:
NAME OF COMMODITY
3D CNC router
Model
MP1218
X,Y working area
1200mm*1800mm
Z working area
>80mm(optional)
Table size
1340mm*2020mm
Max travel speed
4m-5m/min
Max engraving speed
2m-3m/min
Resolution ratio
0.005mm
Reposition accuracy
0.05mm
Max feeding height
110mm
Command
G code*.u00*.mmg*.plt
Surroundings for software
Windows98/2000/xp
Power(not include the spindle)
400W
Power
AC 220V/50Hz
Main axle power rate
1.5KW/2.2KW
Main axle rotating speed
0-24000rpm/min
Work Mode
Stepper
MP-1224 CNC Router
1.CNC Router
2.With hard steel structure
3.Italian HSD air cooling spindle
4.Top quality
5.High precision
CNC Router
Product Content
With hard steel structure, this machine is fit for hard wood working, like cutting and engraving on Rosewood for
funiture, indoor decoration. And with the Vacuum holding way and dust collector, the mchine is qualified for mass-
producing of funituers.
We use top quality compoents for the machines, like HSD spindle, Delta Inverter, Becker Vacuum pump,Hiwin
linear and so on, to keep the machine in the best condition even after many years working.
Optional functions
We use the best quality parts for the CNC routers:
such as: Italian HSD air cooling spindle, Delta inverter, Germany Becker vacuum pump, Hiwin rail linear bearings and bakelite for the vacuum table.
PARAMETERS NO. Discription Parameter
1 X,Y,Z Working Area 1200x2400x200mm
2 Table Size 1320×2940mm
3 X,Y,Z Traveling Positioning Accuracy ±0.03/300mm
4 X,Y,Z Repositioning Positioning Accuracy ±0.03mm
5 Table Surface Vacuum & T-slot combined table (Option:T-slot table)
6 Frame Welded strucutre
7 X, Y Structure Rack and Pinion Drive,Hiwin Rail Linear Bearings
8 Z Structure Ball Screw, Hiwin Rail Linear Bearings
9 Max.Power Consumption (Without spindle) 2.0Kw
10 Max.Rapid Travel Rate 33000mm/min
11 Max.Working Speed 25000mm/min
12 Spindle Power Motor 3.0Kw HSD Spindle (Option:2.0kw/6.0 HSD spindle)
13 Spindle Speed 6000-18000RPM
14 Drive Motors Stepper system (Option: Yaskawa servo, Panasonic servo)
15 Working Voltage AC380V/50/60Hz,3PH (Option: 220V))
16 Command Language G Code
17 Operating System DSP System (Option: Mach3 PC Software)
18 Interface USB
19 Flash Memory 128M(U Disk)
20 Collet ER25
21 X,Y Resolution <0.02mm
22 Software Compatability Type3 software,Ucancam software(Option:Artcam software)
23 Running Environment Temperature: 0~45
Relative humidity: 30%~75%
24 Packing Size 3200X2100X1970mm
25 Net Weight 1260KG
26 Gross Weight 1450KG
2.With hard steel structure
3.Italian HSD air cooling spindle
4.Top quality
5.High precision
CNC Router
Product Content
With hard steel structure, this machine is fit for hard wood working, like cutting and engraving on Rosewood for
funiture, indoor decoration. And with the Vacuum holding way and dust collector, the mchine is qualified for mass-
producing of funituers.
We use top quality compoents for the machines, like HSD spindle, Delta Inverter, Becker Vacuum pump,Hiwin
linear and so on, to keep the machine in the best condition even after many years working.
Optional functions
We use the best quality parts for the CNC routers:
such as: Italian HSD air cooling spindle, Delta inverter, Germany Becker vacuum pump, Hiwin rail linear bearings and bakelite for the vacuum table.
PARAMETERS NO. Discription Parameter
1 X,Y,Z Working Area 1200x2400x200mm
2 Table Size 1320×2940mm
3 X,Y,Z Traveling Positioning Accuracy ±0.03/300mm
4 X,Y,Z Repositioning Positioning Accuracy ±0.03mm
5 Table Surface Vacuum & T-slot combined table (Option:T-slot table)
6 Frame Welded strucutre
7 X, Y Structure Rack and Pinion Drive,Hiwin Rail Linear Bearings
8 Z Structure Ball Screw, Hiwin Rail Linear Bearings
9 Max.Power Consumption (Without spindle) 2.0Kw
10 Max.Rapid Travel Rate 33000mm/min
11 Max.Working Speed 25000mm/min
12 Spindle Power Motor 3.0Kw HSD Spindle (Option:2.0kw/6.0 HSD spindle)
13 Spindle Speed 6000-18000RPM
14 Drive Motors Stepper system (Option: Yaskawa servo, Panasonic servo)
15 Working Voltage AC380V/50/60Hz,3PH (Option: 220V))
16 Command Language G Code
17 Operating System DSP System (Option: Mach3 PC Software)
18 Interface USB
19 Flash Memory 128M(U Disk)
20 Collet ER25
21 X,Y Resolution <0.02mm
22 Software Compatability Type3 software,Ucancam software(Option:Artcam software)
23 Running Environment Temperature: 0~45
Relative humidity: 30%~75%
24 Packing Size 3200X2100X1970mm
25 Net Weight 1260KG
26 Gross Weight 1450KG
MP-1325 3D cnc advertising cutting router
MP1325 3D cnc advertising cutting router
1.Powerful cutting capacity
2.Good compatibility
We supply professional MP1325 3D cnc advertising cutting router of high precision.
Specifications:
The MP1325 3D cnc advertising cutting router has a special application of ads engraving field,the model of 3D cnc advertising cutting router is efficient and endurable, economical and practical for advertising cutting, it has been mainly used for large advertisement signs making. Which makes your business much bigger in the future, and becoming the most competitive in the advertisement industry.
Techincal parameters:
NAME OF COMMODITY
3D cnc advertising cutting router
Model
MP1325
X,Y working area
1300mm*2500mm
Z working area
>50mm(optional)
Table size
144000mm*2680mm
Max travel speed
4m-5m/min
Max engraving speed
2m-3m/min
Resolution ratio
0.005mm
Reposition accuracy
0.05mm
Max feeding height
50mm
Command
G code*.u00*.mmg*.plt
Surroundings for software
Windows98/2000/xp
Power(not include the spindle)
400W
Power
AC 220V/50Hz
Main axle power rate
1.5KW/2.2KW
Main axle rotating speed
0-24000rpm/min
Work Mode
Stepper
We are looking for long time agent, more information, please do not hesitate to contact me.
1.Powerful cutting capacity
2.Good compatibility
We supply professional MP1325 3D cnc advertising cutting router of high precision.
Specifications:
The MP1325 3D cnc advertising cutting router has a special application of ads engraving field,the model of 3D cnc advertising cutting router is efficient and endurable, economical and practical for advertising cutting, it has been mainly used for large advertisement signs making. Which makes your business much bigger in the future, and becoming the most competitive in the advertisement industry.
Techincal parameters:
NAME OF COMMODITY
3D cnc advertising cutting router
Model
MP1325
X,Y working area
1300mm*2500mm
Z working area
>50mm(optional)
Table size
144000mm*2680mm
Max travel speed
4m-5m/min
Max engraving speed
2m-3m/min
Resolution ratio
0.005mm
Reposition accuracy
0.05mm
Max feeding height
50mm
Command
G code*.u00*.mmg*.plt
Surroundings for software
Windows98/2000/xp
Power(not include the spindle)
400W
Power
AC 220V/50Hz
Main axle power rate
1.5KW/2.2KW
Main axle rotating speed
0-24000rpm/min
Work Mode
Stepper
We are looking for long time agent, more information, please do not hesitate to contact me.
MP-1325 3D cnc advertising router
MP1325 3D cnc advertising router
1.Powerful cutting capacity
2.Good compatibility
3.Economical style
We supply professional MP1325 3D cnc advertising router for advertising.
Specifications:
The MP1325 3D cnc advertising router has a special application of ads engraving field, the p
erformance can continuing engraving after point breaks and blades breaks.Hold more than 9 points,engrave at discretion.
NAME OF COMMODITY
3D cnc advertising router
Model
MP1325
X,Y working area
1300mm*2500mm
Z working area
>50mm(optional)
Table size
144000mm*2680mm
Max travel speed
4m-5m/min
Max engraving speed
2m-3m/min
Resolution ratio
0.005mm
Reposition accuracy
0.05mm
Max feeding height
50mm
Command
G code*.u00*.mmg*.plt
Surroundings for software
Windows98/2000/xp
Power(not include the spindle)
400W
Power
AC 220V/50Hz
Main axle power rate
1.5KW/2.2KW
Main axle rotating speed
0-24000rpm/min
Work Mode
Stepper
We are an expert in the field of cnc machines, so we can specially offer cnc machines of the same quality at more attractive price compared with our competitors
1.Powerful cutting capacity
2.Good compatibility
3.Economical style
We supply professional MP1325 3D cnc advertising router for advertising.
Specifications:
The MP1325 3D cnc advertising router has a special application of ads engraving field, the p
erformance can continuing engraving after point breaks and blades breaks.Hold more than 9 points,engrave at discretion.
NAME OF COMMODITY
3D cnc advertising router
Model
MP1325
X,Y working area
1300mm*2500mm
Z working area
>50mm(optional)
Table size
144000mm*2680mm
Max travel speed
4m-5m/min
Max engraving speed
2m-3m/min
Resolution ratio
0.005mm
Reposition accuracy
0.05mm
Max feeding height
50mm
Command
G code*.u00*.mmg*.plt
Surroundings for software
Windows98/2000/xp
Power(not include the spindle)
400W
Power
AC 220V/50Hz
Main axle power rate
1.5KW/2.2KW
Main axle rotating speed
0-24000rpm/min
Work Mode
Stepper
We are an expert in the field of cnc machines, so we can specially offer cnc machines of the same quality at more attractive price compared with our competitors
MS-1212 advertising cnc router
advertising cnc router
1.MS-1212 advertising engraver
2.imported orbit
3.Germany ballscrew
4.Advanced control system
advertising cnc router
1.MS-1212 advertising engraver
2.imported orbit
3.Germany ballscrew
4.Advanced control system
Features:
1) Lathe bed is cast wholly and firmly and will not deform
2) Imported ball screw rod and round guide rail to ensure accuracy
3) Frequency conversion water-cooling large power motor for low noise, even
speed, and long operational life
4) USB ensures high speed and efficiency
5) Unique calculating method for curvy, speedy operation
6) Applicable to:
a) Large advertising signs
b) Acrylic brands
c) Tablets
d) Calligraphy
e) 3 dimensional characters
f) Gardening decorations
g) Wall decorations
Model
MS-1212
XY working area
1200x1200mm
Z working area
>100mm
Table size
1340x1420mm
Max travel speed
4m-5m/min
Max engraving speed
2m-3m/min
Resolution ratio
0.005mm
Reposition accuracy
0.05mm
Max feeding height
110mm
Command
G code*.u00*.mmg*.plt
Surroundings for software
Windows98/2000/xp
Power(not include the spindle)
400W
Working voltage
AC220V/50Hz
spindle power rate
1.5/2.2KW
spindle rotating speed
0-24000rpm/min
Drive motor
Stepper
The samples
1.MS-1212 advertising engraver
2.imported orbit
3.Germany ballscrew
4.Advanced control system
advertising cnc router
1.MS-1212 advertising engraver
2.imported orbit
3.Germany ballscrew
4.Advanced control system
Features:
1) Lathe bed is cast wholly and firmly and will not deform
2) Imported ball screw rod and round guide rail to ensure accuracy
3) Frequency conversion water-cooling large power motor for low noise, even
speed, and long operational life
4) USB ensures high speed and efficiency
5) Unique calculating method for curvy, speedy operation
6) Applicable to:
a) Large advertising signs
b) Acrylic brands
c) Tablets
d) Calligraphy
e) 3 dimensional characters
f) Gardening decorations
g) Wall decorations
Model
MS-1212
XY working area
1200x1200mm
Z working area
>100mm
Table size
1340x1420mm
Max travel speed
4m-5m/min
Max engraving speed
2m-3m/min
Resolution ratio
0.005mm
Reposition accuracy
0.05mm
Max feeding height
110mm
Command
G code*.u00*.mmg*.plt
Surroundings for software
Windows98/2000/xp
Power(not include the spindle)
400W
Working voltage
AC220V/50Hz
spindle power rate
1.5/2.2KW
spindle rotating speed
0-24000rpm/min
Drive motor
Stepper
The samples
MS-1224Double-head Advertising cnc router
Advertising CNC router
1.Water cooling spindle
2.Double-head
3.DSP , Ncstudio optional
4.Taiwan TBI ball screw
Newest popular advertising router, cnc advertising machine MS-1224
ADVERTISING ROUTER
Performance Characteristics
1. With whole steel structure, more strong, sturdy and durable without deformation;
2.Three-axis with high precision imported ball screw,hiwin Square orbit to guarantee the working precision
3. Use high quality and power water cooled spindle
4. Software: compatible of a variety of CAD / CAM Design Software, such as type3/Artcam/Castmate
/ Ucancam.
5. Vacuum adsorption table (optional )
Suitable Industry
Advertising industry: advertising signs, logo making, acrylic cutting, plastic molding, advertising
decorative products of different materialsWoodworking Industry, and tag produced
Classical furniture's processing . relief sculpture
Other Industries: carving series , relief series , widely used in Handicraft Industry
Technique parameter
Model-1224
x travel
1200mm
y travel
2400mm
z travel
200mm
Working size
1200*2400
Table size
1220*2440mm
Woring precision
0.02mm
Reposition
0.05mm
Table structure
Vacuum adsorption (PF)
X,Y,Z STRUCTURE
X, Y ,Z Screw rod
Max air line speed
10000-mm/min
Max working speed
20000mm/min
Spindle power
1.5 kw
Running speed
24000r/min
Motor
Stepper
Working vottage
AC220V/50HZ
Control system
Ncstudio
Net weight
800kg
Gross weight
900kg
The parts of our machine
Samples
1.Water cooling spindle
2.Double-head
3.DSP , Ncstudio optional
4.Taiwan TBI ball screw
Newest popular advertising router, cnc advertising machine MS-1224
ADVERTISING ROUTER
Performance Characteristics
1. With whole steel structure, more strong, sturdy and durable without deformation;
2.Three-axis with high precision imported ball screw,hiwin Square orbit to guarantee the working precision
3. Use high quality and power water cooled spindle
4. Software: compatible of a variety of CAD / CAM Design Software, such as type3/Artcam/Castmate
/ Ucancam.
5. Vacuum adsorption table (optional )
Suitable Industry
Advertising industry: advertising signs, logo making, acrylic cutting, plastic molding, advertising
decorative products of different materialsWoodworking Industry, and tag produced
Classical furniture's processing . relief sculpture
Other Industries: carving series , relief series , widely used in Handicraft Industry
Technique parameter
Model-1224
x travel
1200mm
y travel
2400mm
z travel
200mm
Working size
1200*2400
Table size
1220*2440mm
Woring precision
0.02mm
Reposition
0.05mm
Table structure
Vacuum adsorption (PF)
X,Y,Z STRUCTURE
X, Y ,Z Screw rod
Max air line speed
10000-mm/min
Max working speed
20000mm/min
Spindle power
1.5 kw
Running speed
24000r/min
Motor
Stepper
Working vottage
AC220V/50HZ
Control system
Ncstudio
Net weight
800kg
Gross weight
900kg
The parts of our machine
Samples
MS-1325 multi-head wood cnc router
multihead wood cnc router
1.Working area:1300*2500*180mm
2.Vacuum table dust collector
3.3Kw water-cooled spindle
4.CE
multi-head wood cnc router
Applicable Materials: nonmetal and metal materials, such as wood, pvc, acrylic, mdf, plexiglass, artificial granite, and aluminum, copper, aluminum composite panel, etc.
1
Machine description
MS-1325
2
Machine size
1350*3100mm
3
X-Y-Z axis Working area
1300*2500mm
4
X-Y axis movement
Rack and pinion ,Linear orbit.
gear drive/Taiwan
5
Z movement
Ball screw drive/Germany
6
Table surface
Vacuum System(option:T-slot or Vacuum Table
7
Guide
Liner30 square /Taiwan
8
Max speed
35,000mm/Min
9
Max cutting speed
25,000mm/Min
10
Repeat positioning accuracy
0.02mm
11
Resolution ratio
0.002mm
12
Spindle rotating speed
18000rpm/Min
13
Feed in height
300mm
14
Adsorb power
4.5 kw/(air cooling)
15
Working Voltage
AC380/50-60Hz 3Phase
16
Computer interface
USB 2.0
17
Inverter power
5.5 KW
18
Collet
ISO30-12.7mm ,
6mm,
3.175mm
19
Software
Type 3 software/France Ucancam software(Option:Artcam software)
20
Running Environment
Temperature:0 degree~45 degree
21
Command code
HPGL,G code ,U00,mmg.plt
22
Controls system
DSP
23
Drive motor
stepper
24
Packing dimensions
2200mm*3200mm*1850mm 1400kg
25
Equipments included
oil lubrication system
dust-removal system
clamps and vacuum fitting
The parts of machine
The samples
1.Working area:1300*2500*180mm
2.Vacuum table dust collector
3.3Kw water-cooled spindle
4.CE
multi-head wood cnc router
Applicable Materials: nonmetal and metal materials, such as wood, pvc, acrylic, mdf, plexiglass, artificial granite, and aluminum, copper, aluminum composite panel, etc.
1
Machine description
MS-1325
2
Machine size
1350*3100mm
3
X-Y-Z axis Working area
1300*2500mm
4
X-Y axis movement
Rack and pinion ,Linear orbit.
gear drive/Taiwan
5
Z movement
Ball screw drive/Germany
6
Table surface
Vacuum System(option:T-slot or Vacuum Table
7
Guide
Liner30 square /Taiwan
8
Max speed
35,000mm/Min
9
Max cutting speed
25,000mm/Min
10
Repeat positioning accuracy
0.02mm
11
Resolution ratio
0.002mm
12
Spindle rotating speed
18000rpm/Min
13
Feed in height
300mm
14
Adsorb power
4.5 kw/(air cooling)
15
Working Voltage
AC380/50-60Hz 3Phase
16
Computer interface
USB 2.0
17
Inverter power
5.5 KW
18
Collet
ISO30-12.7mm ,
6mm,
3.175mm
19
Software
Type 3 software/France Ucancam software(Option:Artcam software)
20
Running Environment
Temperature:0 degree~45 degree
21
Command code
HPGL,G code ,U00,mmg.plt
22
Controls system
DSP
23
Drive motor
stepper
24
Packing dimensions
2200mm*3200mm*1850mm 1400kg
25
Equipments included
oil lubrication system
dust-removal system
clamps and vacuum fitting
The parts of machine
The samples
MS-1325 wood CNC router
MS-1325 wood CNC Router
1)Professional Manufacturer
2)Vacuum or T-slot working table
3)Air-cooled or or water-driven
MS-1325 wood CNC Router
1)Professional Manufacturer
2)Vacuum or T-slot working table
3)Air-cooled or or water-driven
1.Main Features
1)Lathe bed is cast by Iron,X,Y axis adopts gear wheel and rack transmission, Z axis adopt high precision ball-screw transmission, imprted high precision square linear,which can ensure the stability of processing.
2)High power inverter-drive spindle cooled by water.It adopts stepper motor and two motors for Y axis,which can ensure running speed to be up to 25m/min.
3)DSP off-line control,transmiting files by USB flash stick.
4)Dust collecting system can offer a clean working environment and reduce the manual labor
5)Vacuum table with 6 vacuum zones, which can absorb different size materials.
Main technical parameter
1
Machine description
MS-1325
2
Machine size
1350*3100mm
3
X-Y-Z axis Working area
1300*2500mm
4
X-Y axis movement
Rack and pinion ,Linear orbit.
gear drive/Taiwan
5
Z movement
Ball screw drive/Germany
6
Table surface
Vacuum System(option:T-slot or Vacuum Table
7
Guide
Liner30 square /Taiwan
8
Max speed
35,000mm/Min
9
Max cutting speed
25,000mm/Min
10
Repeat positioning accuracy
0.02mm
11
Resolution ratio
0.002mm
12
Spindle rotating speed
18000rpm/Min
13
Feed in height
300mm
14
Adsorb power
4.5 kw/(air cooling)
15
Working Voltage
AC380/50-60Hz 3Phase
16
Computer interface
USB 2.0
17
Inverter power
5.5 KW
18
Collet
ISO30-12.7mm ,
6mm,
3.175mm
19
Software
Type 3 software/France Ucancam software(Option:Artcam software)
20
Running Environment
Temperature:0 degree~45 degree
21
Command code
HPGL,G code ,U00,mmg.plt
22
Controls system
DSP
23
Drive motor
stepper
24
Packing dimensions
2200mm*3200mm*1850mm 1400kg
25
Equipments included
oil lubrication system
dust-removal system
clamps and vacuum fitting
The parts of machine
1)Professional Manufacturer
2)Vacuum or T-slot working table
3)Air-cooled or or water-driven
MS-1325 wood CNC Router
1)Professional Manufacturer
2)Vacuum or T-slot working table
3)Air-cooled or or water-driven
1.Main Features
1)Lathe bed is cast by Iron,X,Y axis adopts gear wheel and rack transmission, Z axis adopt high precision ball-screw transmission, imprted high precision square linear,which can ensure the stability of processing.
2)High power inverter-drive spindle cooled by water.It adopts stepper motor and two motors for Y axis,which can ensure running speed to be up to 25m/min.
3)DSP off-line control,transmiting files by USB flash stick.
4)Dust collecting system can offer a clean working environment and reduce the manual labor
5)Vacuum table with 6 vacuum zones, which can absorb different size materials.
Main technical parameter
1
Machine description
MS-1325
2
Machine size
1350*3100mm
3
X-Y-Z axis Working area
1300*2500mm
4
X-Y axis movement
Rack and pinion ,Linear orbit.
gear drive/Taiwan
5
Z movement
Ball screw drive/Germany
6
Table surface
Vacuum System(option:T-slot or Vacuum Table
7
Guide
Liner30 square /Taiwan
8
Max speed
35,000mm/Min
9
Max cutting speed
25,000mm/Min
10
Repeat positioning accuracy
0.02mm
11
Resolution ratio
0.002mm
12
Spindle rotating speed
18000rpm/Min
13
Feed in height
300mm
14
Adsorb power
4.5 kw/(air cooling)
15
Working Voltage
AC380/50-60Hz 3Phase
16
Computer interface
USB 2.0
17
Inverter power
5.5 KW
18
Collet
ISO30-12.7mm ,
6mm,
3.175mm
19
Software
Type 3 software/France Ucancam software(Option:Artcam software)
20
Running Environment
Temperature:0 degree~45 degree
21
Command code
HPGL,G code ,U00,mmg.plt
22
Controls system
DSP
23
Drive motor
stepper
24
Packing dimensions
2200mm*3200mm*1850mm 1400kg
25
Equipments included
oil lubrication system
dust-removal system
clamps and vacuum fitting
The parts of machine
MS-1325 wood design machine router
wood design machine router
1) Advanced HSD with Auto Tool Changer
2) Prompt delivery
3) Reliable quality
4) CE
wood design machine router
MS-1325 industrial wood router
1) Advanced HSD with Auto Tool Changer
2) Prompt delivery
3) Reliable quality
4) CE
Working Area: 1300*2500*350mm
Vacuum table in zones with Chinese 5.5 KW, 160m³/h vacuum pump
Spindle: HSD 9.0 Kw Air cooling spindle made in Italy
Auto tool change machine with round Tool magazine: 8 positions
Tool holder: 3 pieces (with 4 pcs collet : 3.175mm, 4mm, 6mm,12.7mm, 16 mm, customer can choose four pieces)
Drive: Japanese Yaskawa Servo System
Inverter:Taiwanse Delta Inverter
Reducer Box: German Eisler Reudcer Box
Electronic Parts:German Schneider Electronic Spare Parts
Linear guide: HIWIN Linear guide made in Taiwan
Cable:MAXICAM Highly flexible towline-only Cable Imported fire-resistant double-sheathed which could be bent 300 000 times
Control system: Syntec system made in Taiwan.
Software: Type 3 software
Voltage: 3PH 380V 50HZ
This multi function drilling system could be used to drill vertically and horizontally . Fast and effective than spindle drilling and reduce ATC procedures.
Item
1224
1530
2030
Working area
1200*2440*350 mm
1500*3000*350 mm
2000*3000*350 mm
Table Size
1220x2440mm
1520*3000 mm
2020*3000 mm
Transmission
X,Y with linear guide Z with.Ball screw (Option : THK Linear guide from Japan)
Table structure
Vacuum table in zones ( Option: T-Slot vacuum table )
Spindle
9.0 KW Italian HSD Spindle
Spindle speed
24000 RPM
Speed
MAX travelling speed :50000 mm/min
MAX working speed :25000 mm/min
Driver and Motors
YASKAWA servo drivers and motors from Japan
Working voltage
AC380V/3PH/50Hz (Option : AC220V/3PH/50Hz )
Operating system
Syntec from Taiwan (Option : OSAI )
Net weight
2000 KG
2300 KG
2600 KG
Gross weight
2300 KG
2600 KG
2900 KG
1) Advanced HSD with Auto Tool Changer
2) Prompt delivery
3) Reliable quality
4) CE
wood design machine router
MS-1325 industrial wood router
1) Advanced HSD with Auto Tool Changer
2) Prompt delivery
3) Reliable quality
4) CE
Working Area: 1300*2500*350mm
Vacuum table in zones with Chinese 5.5 KW, 160m³/h vacuum pump
Spindle: HSD 9.0 Kw Air cooling spindle made in Italy
Auto tool change machine with round Tool magazine: 8 positions
Tool holder: 3 pieces (with 4 pcs collet : 3.175mm, 4mm, 6mm,12.7mm, 16 mm, customer can choose four pieces)
Drive: Japanese Yaskawa Servo System
Inverter:Taiwanse Delta Inverter
Reducer Box: German Eisler Reudcer Box
Electronic Parts:German Schneider Electronic Spare Parts
Linear guide: HIWIN Linear guide made in Taiwan
Cable:MAXICAM Highly flexible towline-only Cable Imported fire-resistant double-sheathed which could be bent 300 000 times
Control system: Syntec system made in Taiwan.
Software: Type 3 software
Voltage: 3PH 380V 50HZ
This multi function drilling system could be used to drill vertically and horizontally . Fast and effective than spindle drilling and reduce ATC procedures.
Item
1224
1530
2030
Working area
1200*2440*350 mm
1500*3000*350 mm
2000*3000*350 mm
Table Size
1220x2440mm
1520*3000 mm
2020*3000 mm
Transmission
X,Y with linear guide Z with.Ball screw (Option : THK Linear guide from Japan)
Table structure
Vacuum table in zones ( Option: T-Slot vacuum table )
Spindle
9.0 KW Italian HSD Spindle
Spindle speed
24000 RPM
Speed
MAX travelling speed :50000 mm/min
MAX working speed :25000 mm/min
Driver and Motors
YASKAWA servo drivers and motors from Japan
Working voltage
AC380V/3PH/50Hz (Option : AC220V/3PH/50Hz )
Operating system
Syntec from Taiwan (Option : OSAI )
Net weight
2000 KG
2300 KG
2600 KG
Gross weight
2300 KG
2600 KG
2900 KG
MS-1530 Plasma CNC cutting router
Plasma CNC cutting router
1.Plasma engraaver machine
2.DSP control system
3.for metal cutting
4.Taiwan rails
Plasma CNC cutting router
Performance Features
1. Using light-beam structural design, the structure with good rigidity, light weight, small movements of inertia and so on.
2. Gantry structure, Y-axis motor drive, as well as synchronous pairs of X, Y, Z axis using a circular rail (optional square rails), transmission smooth running and high accuracy.
3. For three-dimensional LED advertising word, the word trough and the bottom metal panel to be cut, cutting accuracy of quality indicators.
4. And other advertising devices (blister machines, gear cutting machine, engraving machine) matching ads word processing technology to form the pipeline to thoroughly solve the traditional manual processing methods. Improve efficiency several times.
5. Cut mouth is small, neat, no dregs phenomenon, to avoid the rest of the secondary processing.
6. Cutting speed, high precision and low cost.
7. CNC system configuration Gao, automatic arc ignition, stable performance, igniting the success rate of 99%.
8. Support Wentai, ARTCAM, Type3 software such as generated by the standard G code path file.
Applied Materials
Stainless steel, carbon steel, alloy steel, spring steel, copper, aluminum, gold, silver, titanium and other metal plates and tubes.
Model
MS-1530
Working Area
3000mm*1500mm
Cutting thickness
0.2mm-6mm(carbon)
Minimum line width
0.15mm
Power
380V/50HZ/100A/60A
Geometry precision
0.05mm/1000mm
Positioning accuracy
0.04mm
Machine weight
3800kg
Max. cutting rate
35mm/s
Material
Cutting thickness
(mm)
Punch hole
(mm)
Max.Cutting speed
(mm)
Tilt Angle
Stainless steel
0.5
0.12
3500
1
0.12
1500
0.5°
2
0.15
800
1°
3
0.3
500
2°
4
0.6
300
2.5°
5
Max.0.7
180
3°
Carbon steel
1
0.12
1500
2
0.12
1000
0.5°
3
0.15
600
1°
4
0.3
400
2°
5
0.6
250
2.5°
6
Max.0.7
220
3°
Brass
0.5
0.15
420
1
0.2
300
2
0.25
200
3
0.3
120
1.Plasma engraaver machine
2.DSP control system
3.for metal cutting
4.Taiwan rails
Plasma CNC cutting router
Performance Features
1. Using light-beam structural design, the structure with good rigidity, light weight, small movements of inertia and so on.
2. Gantry structure, Y-axis motor drive, as well as synchronous pairs of X, Y, Z axis using a circular rail (optional square rails), transmission smooth running and high accuracy.
3. For three-dimensional LED advertising word, the word trough and the bottom metal panel to be cut, cutting accuracy of quality indicators.
4. And other advertising devices (blister machines, gear cutting machine, engraving machine) matching ads word processing technology to form the pipeline to thoroughly solve the traditional manual processing methods. Improve efficiency several times.
5. Cut mouth is small, neat, no dregs phenomenon, to avoid the rest of the secondary processing.
6. Cutting speed, high precision and low cost.
7. CNC system configuration Gao, automatic arc ignition, stable performance, igniting the success rate of 99%.
8. Support Wentai, ARTCAM, Type3 software such as generated by the standard G code path file.
Applied Materials
Stainless steel, carbon steel, alloy steel, spring steel, copper, aluminum, gold, silver, titanium and other metal plates and tubes.
Model
MS-1530
Working Area
3000mm*1500mm
Cutting thickness
0.2mm-6mm(carbon)
Minimum line width
0.15mm
Power
380V/50HZ/100A/60A
Geometry precision
0.05mm/1000mm
Positioning accuracy
0.04mm
Machine weight
3800kg
Max. cutting rate
35mm/s
Material
Cutting thickness
(mm)
Punch hole
(mm)
Max.Cutting speed
(mm)
Tilt Angle
Stainless steel
0.5
0.12
3500
1
0.12
1500
0.5°
2
0.15
800
1°
3
0.3
500
2°
4
0.6
300
2.5°
5
Max.0.7
180
3°
Carbon steel
1
0.12
1500
2
0.12
1000
0.5°
3
0.15
600
1°
4
0.3
400
2°
5
0.6
250
2.5°
6
Max.0.7
220
3°
Brass
0.5
0.15
420
1
0.2
300
2
0.25
200
3
0.3
120
30pcs/set woodworking router
1)The material of the router bits: 45# Carbon with YG8 carbide tip
2)Good finish
3)ISO9001:2008 quality management system
woodworking router
1)Shank sizes:6mm,8mm,12mm,1/4,1/2 available
2)Color:red,blue,yellow,black,sand-blasting available
3)We OEM to many famous brand just for quality products,strong team and best service
4)Please see 30pcs sizes ,company profile and other popular router bits set in detail as below:
Name of commodity
size(mm)
name of commodity
size(mm)
straight bit
5
25 degree chamfer bit
16
straight bit
6
45 degree chamfer bit
32
straight bit
8
roman ogee bit
R4
straight bit
10
rabbeting bit
28.6
straight bit
12
cove bit
R6.3
straight bit
14
cove bit
R9.5
straight bit
16
rounding over bit
R3.2
straight bit
18
rounding over bit
R6.3
straight bit
20
rounding over bit
R7.9
dovetail bit
12.7
rounding over bit
R9.5
60 degree V goove bit
9.5
bearing bit
R3.2
90 degree V goove bit
12.7
bearing bit
R6.3
core box bit
R3.2
bearing bit
R7.9
core box bit
R6.3
bearing bit
R9.5
classical bit
12.7
flush trim bit
12.7
2)Good finish
3)ISO9001:2008 quality management system
woodworking router
1)Shank sizes:6mm,8mm,12mm,1/4,1/2 available
2)Color:red,blue,yellow,black,sand-blasting available
3)We OEM to many famous brand just for quality products,strong team and best service
4)Please see 30pcs sizes ,company profile and other popular router bits set in detail as below:
Name of commodity
size(mm)
name of commodity
size(mm)
straight bit
5
25 degree chamfer bit
16
straight bit
6
45 degree chamfer bit
32
straight bit
8
roman ogee bit
R4
straight bit
10
rabbeting bit
28.6
straight bit
12
cove bit
R6.3
straight bit
14
cove bit
R9.5
straight bit
16
rounding over bit
R3.2
straight bit
18
rounding over bit
R6.3
straight bit
20
rounding over bit
R7.9
dovetail bit
12.7
rounding over bit
R9.5
60 degree V goove bit
9.5
bearing bit
R3.2
90 degree V goove bit
12.7
bearing bit
R6.3
core box bit
R3.2
bearing bit
R7.9
core box bit
R6.3
bearing bit
R9.5
classical bit
12.7
flush trim bit
12.7
MS-3636 Mini cnc router with ATC
1.Favorable price with quality assurance
2.CNC woodworking router
3.DSP control system
4.USB interface
5.High efficiency
MS-3636 Mini cnc router with ATC
About Product
Usage: can be used to do wood work, MDF, plastic and acrylic engraving, relievo, and signs.
Machine features:
1. Particular style, competent for elaborate engraving and cutting.
2. 3KW water-cooled spindle motor.
3. The lathe bed is wholly cast with iron to ensure high stability. Three axes all adopt linear square rail.
4. Be compatible with Type 3, Artcut, Artcam, Mach3, CAD/CAM software.
5. Memory to ensure the processing point when the blade is broken or postpone stituation. Specific saving mode of different points.
Technical parameter
X Y Z Working Area
360mm*360mm*120mm Z Strock can be higher
Table size
480mm*480mm
Table Structure
T-Slot Extrusions
Table surface
PVC materials
Frame
Cast Iron
X Y Tansmission
Ball screw rod with Round Rail ,Optional:Rack gear, Square Rail.
Z Transmission
Rail linear bearing,Ball Screw Rod.Round Rail.Optional:Square Rail
Engavering accuracy
0.02-0.05mm
Reposition accuracy
0.02-0.05mm
Max air moving speed
8000mm/min
Max working speed
6000mm/min
Spindle Power
0.8KW water cooling spindle without brush.Optional:Self cooling Spindle.
Spindle Max Rotary Speed
24000r/min
Motors and Drivers
Stepper Motor and Driver(Optional:Servo Motor and Driver)
Working Valtage
AC220V/50HZ 3PH(Optional:380V)
Command Language
G code.uoo.mmg.plt.cnc
Operating System
NcStudio PCI Card,Optional:DSP Panel
Interface
USB
Flash memory
128 U Disk
Spindle Collect
ER11-ER20
Running Environment
Temperature: 0°C~45°CRelative humidity: 30%~75%
Packing Tape
Wooden case
2.CNC woodworking router
3.DSP control system
4.USB interface
5.High efficiency
MS-3636 Mini cnc router with ATC
About Product
Usage: can be used to do wood work, MDF, plastic and acrylic engraving, relievo, and signs.
Machine features:
1. Particular style, competent for elaborate engraving and cutting.
2. 3KW water-cooled spindle motor.
3. The lathe bed is wholly cast with iron to ensure high stability. Three axes all adopt linear square rail.
4. Be compatible with Type 3, Artcut, Artcam, Mach3, CAD/CAM software.
5. Memory to ensure the processing point when the blade is broken or postpone stituation. Specific saving mode of different points.
Technical parameter
X Y Z Working Area
360mm*360mm*120mm Z Strock can be higher
Table size
480mm*480mm
Table Structure
T-Slot Extrusions
Table surface
PVC materials
Frame
Cast Iron
X Y Tansmission
Ball screw rod with Round Rail ,Optional:Rack gear, Square Rail.
Z Transmission
Rail linear bearing,Ball Screw Rod.Round Rail.Optional:Square Rail
Engavering accuracy
0.02-0.05mm
Reposition accuracy
0.02-0.05mm
Max air moving speed
8000mm/min
Max working speed
6000mm/min
Spindle Power
0.8KW water cooling spindle without brush.Optional:Self cooling Spindle.
Spindle Max Rotary Speed
24000r/min
Motors and Drivers
Stepper Motor and Driver(Optional:Servo Motor and Driver)
Working Valtage
AC220V/50HZ 3PH(Optional:380V)
Command Language
G code.uoo.mmg.plt.cnc
Operating System
NcStudio PCI Card,Optional:DSP Panel
Interface
USB
Flash memory
128 U Disk
Spindle Collect
ER11-ER20
Running Environment
Temperature: 0°C~45°CRelative humidity: 30%~75%
Packing Tape
Wooden case
MS-3636 wood cnc router
wood cnc router
1.CNC cutting and engraving machine
2.high cut and engrave presion
3.with CE CQC ISO
4.2.2-8KW spindle
Features:
1. The machine body is strong, rigid, high precision, reliable and durable.
2. Imported high-precision ball screw gap, smooth movement, to ensure that the machine tools high-precision
3. Using well-known domestic brands of water-cooled brushless spindle, low noise, strong cutting ability, to ensure the long time working.
4. Good three-axis and dust-proof structure to ensure that the machines longer service life.
5. High-performance driven motor to ensure that the machines high speed and accurancy
6. Designer perfectly, select the best machine accessories , to minimize the failure rate preferred
7. Breakpoint specific memory, power outages continued carving, processing time forecast, and other functions to ensure that accidental processing
8. Compatility, compatible Type3/ Artcam/ Castmate/Wentai, and so on a variety of CAD/CAM design software...
Applicable field:
Efficient produce a variety of wood products, advertising signs, acrylic, plastic membrane system and large-scale cutting, seal crafts, badges, scale, sculputure and iron, copper, plastic sheeting, wood or other non-metallic materials.
Technology parameters:
Model
MS-3636
MS-6090(mm)
MS-1212(mm)
MS-1218
MS-1224(mm)
MS-1325
Processing area
360*360
900*600
1200*1200
1200*1800
1200*2400
1300*2500
Engraving speed
0-4000mm/min
0-4000mm/min
0-4000mm/min
0-4000mm/min
0-4000mm/min
0-4000mm/min
Engraving command
G code
G code
G code
G code
G code
G code
X,Y,Z movement location precision
0.03/100mm
0.03/100mm
0.03/100mm
0.03/100mm
0.03/100mm
0.03/100mm
X,Y,Z repeat location precision
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
Main spindle power
1.2kw-3.0kw
1.2kw-3.0kw
1.2kw-3.0kw
1.2kw-3.0kw
1.2kw-3.0kw
1.2kw-3.0kw
Main spindle rotating speed
8000-24000r/min
8000-24000r/min
8000-24000r/min
8000-24000r/min
8000-24000r/min
8000-24000r/min
Z movement distance
120mm
120mm
120mm
120mm
120mm
120mm
Feed hight
150mm
150mm
150mm
150mm
150mm
150mm
Processing precision
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
Knife
&3.175/&4/&6
&3.175/&4/&6
&3.175/&4/&6
&3.175/&4/&6
&3.175/&4/&6
&3.175/&4/&6
Working power
AC220V/50HZ
AC220V/50HZ
AC220V/50HZ
AC220V/50HZ
AC220V/50HZ
AC220V/50HZ
Max consumption power
2KW
3KW
3KW
3KW
4.5KW
4.5KW
Working temperature
5-40 Centigrade
5-40 Centigrade
5-40 Centigrade
5-40 Centigrade
5-40 Centigrade
5-40 Centigrade
Relative huminity
30%-75%
30%-75%
30%-75%
30%-75%
30%-75%
30%-75%
1.CNC cutting and engraving machine
2.high cut and engrave presion
3.with CE CQC ISO
4.2.2-8KW spindle
Features:
1. The machine body is strong, rigid, high precision, reliable and durable.
2. Imported high-precision ball screw gap, smooth movement, to ensure that the machine tools high-precision
3. Using well-known domestic brands of water-cooled brushless spindle, low noise, strong cutting ability, to ensure the long time working.
4. Good three-axis and dust-proof structure to ensure that the machines longer service life.
5. High-performance driven motor to ensure that the machines high speed and accurancy
6. Designer perfectly, select the best machine accessories , to minimize the failure rate preferred
7. Breakpoint specific memory, power outages continued carving, processing time forecast, and other functions to ensure that accidental processing
8. Compatility, compatible Type3/ Artcam/ Castmate/Wentai, and so on a variety of CAD/CAM design software...
Applicable field:
Efficient produce a variety of wood products, advertising signs, acrylic, plastic membrane system and large-scale cutting, seal crafts, badges, scale, sculputure and iron, copper, plastic sheeting, wood or other non-metallic materials.
Technology parameters:
Model
MS-3636
MS-6090(mm)
MS-1212(mm)
MS-1218
MS-1224(mm)
MS-1325
Processing area
360*360
900*600
1200*1200
1200*1800
1200*2400
1300*2500
Engraving speed
0-4000mm/min
0-4000mm/min
0-4000mm/min
0-4000mm/min
0-4000mm/min
0-4000mm/min
Engraving command
G code
G code
G code
G code
G code
G code
X,Y,Z movement location precision
0.03/100mm
0.03/100mm
0.03/100mm
0.03/100mm
0.03/100mm
0.03/100mm
X,Y,Z repeat location precision
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
Main spindle power
1.2kw-3.0kw
1.2kw-3.0kw
1.2kw-3.0kw
1.2kw-3.0kw
1.2kw-3.0kw
1.2kw-3.0kw
Main spindle rotating speed
8000-24000r/min
8000-24000r/min
8000-24000r/min
8000-24000r/min
8000-24000r/min
8000-24000r/min
Z movement distance
120mm
120mm
120mm
120mm
120mm
120mm
Feed hight
150mm
150mm
150mm
150mm
150mm
150mm
Processing precision
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
Knife
&3.175/&4/&6
&3.175/&4/&6
&3.175/&4/&6
&3.175/&4/&6
&3.175/&4/&6
&3.175/&4/&6
Working power
AC220V/50HZ
AC220V/50HZ
AC220V/50HZ
AC220V/50HZ
AC220V/50HZ
AC220V/50HZ
Max consumption power
2KW
3KW
3KW
3KW
4.5KW
4.5KW
Working temperature
5-40 Centigrade
5-40 Centigrade
5-40 Centigrade
5-40 Centigrade
5-40 Centigrade
5-40 Centigrade
Relative huminity
30%-75%
30%-75%
30%-75%
30%-75%
30%-75%
30%-75%
MS-6090 Cylinder & Rotary CNC router machine
desktop advertising cnc engraver
1.Cast lathe bed , solid and stable
2.imported high accuracy ball scrrew
MS-6090 Cylinder & Rotary CNC router
machineAdvantage Features:
1) Lathe bed is cast wholly and firmly and will not deform
2) Imported ball screw rod and round guide rail to ensure accuracy
3) Subdivision stepper motor with excellent performance, quick speed,
stable operation, and big cutting movement to ensure long and safe
operation
4) Frequency conversion water-cooling large power motor for low noise, even
speed, and long operational life.
5) Humanistic design, the machine can be disassembled, so it is easily transported
6) Applicable to:
a) Large advertising signs
b) Acrylic brands
c) PVC cutting
d) Tablets
e) Calligraphy
f) 3 dimensional characters
g) Gardening decorations
h) Wall decorations
Specifications:
This machine is widely used in advertising industry, such as sign making ,department nameplate ,chest badge ,architectural model, ABS plate , acrylic cutting, jade ,glass and marble engraving.
1,Solid gantry, well structure of lathe bed ,stable lathe table, fast speed and high accuracy .
2, High-speed water cooling spindle and high performance subdivision driver ensure to work stably for a long time.
3, Adopt advanced CNC system , configured with practical and easily –learned software , can conveniently check the moving path of tool, and adjust the processing depth of Z axis and the speed of motor.
4,Option:Stianless steel water tank is suitable for the processing of hard materials, such as glass, marble and so on.
Working Area (X*Y*Z)
600*900*100mm
Resolution
0.025mm
Spindle
1.5KW
Voltage
AC220V/50Hz
Max Moving Speed
6000mm/min
Spindle Speed
6000-24000rpm
Feeding Height
80mm.
Certificate
CE,FDA
The parts of machine
Samples
1.Cast lathe bed , solid and stable
2.imported high accuracy ball scrrew
MS-6090 Cylinder & Rotary CNC router
machineAdvantage Features:
1) Lathe bed is cast wholly and firmly and will not deform
2) Imported ball screw rod and round guide rail to ensure accuracy
3) Subdivision stepper motor with excellent performance, quick speed,
stable operation, and big cutting movement to ensure long and safe
operation
4) Frequency conversion water-cooling large power motor for low noise, even
speed, and long operational life.
5) Humanistic design, the machine can be disassembled, so it is easily transported
6) Applicable to:
a) Large advertising signs
b) Acrylic brands
c) PVC cutting
d) Tablets
e) Calligraphy
f) 3 dimensional characters
g) Gardening decorations
h) Wall decorations
Specifications:
This machine is widely used in advertising industry, such as sign making ,department nameplate ,chest badge ,architectural model, ABS plate , acrylic cutting, jade ,glass and marble engraving.
1,Solid gantry, well structure of lathe bed ,stable lathe table, fast speed and high accuracy .
2, High-speed water cooling spindle and high performance subdivision driver ensure to work stably for a long time.
3, Adopt advanced CNC system , configured with practical and easily –learned software , can conveniently check the moving path of tool, and adjust the processing depth of Z axis and the speed of motor.
4,Option:Stianless steel water tank is suitable for the processing of hard materials, such as glass, marble and so on.
Working Area (X*Y*Z)
600*900*100mm
Resolution
0.025mm
Spindle
1.5KW
Voltage
AC220V/50Hz
Max Moving Speed
6000mm/min
Spindle Speed
6000-24000rpm
Feeding Height
80mm.
Certificate
CE,FDA
The parts of machine
Samples
MS-6090 laser cnc router
laser cnc router
1.German Ball Screw Nut and imported Guide
2.Broken-point Memory
3.High Power Cuttiing 1.5KW spindle
laser CNC router
Product Feactures
:
German Ball Screw Nut and imported Guide;
Broken-point memory ensures the continuity of work when inciddent happens;
Save of many processed points;
Gantry movement ensures the undeformation after a long-time work as well as a higher accuracy;
High power cutting of Metal CNC Router Machine ensures the smoothness and clearness of the processed metal;
Wide range of use: Architecture model, school, government departments and enterprises...
Standard Configurations
Options
Lathe Bed with aluminum cast table
2.2KW Transducer
Three axis with imported round guides and double ball screw nuts
Common Handle
NCSTUDIO system
2.2kw Dust Collector
1.5KW water-cooling transducer motor
U Handle Fitting
Leadshine driver
Technical Data
X Y Working Area
600mm*900mm
Z Working Area
>100mm
Table Size
720mm*1150mm
Max. Speed
4m-5m/min
Max. Working Speed
2m-3m/min
Working Delicacy
0.005mm
Repositioning Accuracy
0.05mm
Feeding Height
100mm
Command Code
G Code*.u00*.mmg*.plt
Working Software
Windows98/2000/xp
Power (not including spindle)
300w
Working Voltage
AC220V/50HZ
Spindle Power
1.5kw
Spindle Running Speed
0-24000rpm
Motor
Stepper
1.German Ball Screw Nut and imported Guide
2.Broken-point Memory
3.High Power Cuttiing 1.5KW spindle
laser CNC router
Product Feactures
:
German Ball Screw Nut and imported Guide;
Broken-point memory ensures the continuity of work when inciddent happens;
Save of many processed points;
Gantry movement ensures the undeformation after a long-time work as well as a higher accuracy;
High power cutting of Metal CNC Router Machine ensures the smoothness and clearness of the processed metal;
Wide range of use: Architecture model, school, government departments and enterprises...
Standard Configurations
Options
Lathe Bed with aluminum cast table
2.2KW Transducer
Three axis with imported round guides and double ball screw nuts
Common Handle
NCSTUDIO system
2.2kw Dust Collector
1.5KW water-cooling transducer motor
U Handle Fitting
Leadshine driver
Technical Data
X Y Working Area
600mm*900mm
Z Working Area
>100mm
Table Size
720mm*1150mm
Max. Speed
4m-5m/min
Max. Working Speed
2m-3m/min
Working Delicacy
0.005mm
Repositioning Accuracy
0.05mm
Feeding Height
100mm
Command Code
G Code*.u00*.mmg*.plt
Working Software
Windows98/2000/xp
Power (not including spindle)
300w
Working Voltage
AC220V/50HZ
Spindle Power
1.5kw
Spindle Running Speed
0-24000rpm
Motor
Stepper
MX506A Router machine
(1) Table size: 760x500mm
(2) Max. working depth: 60mm
(3) Throat depth: 650mm
(4) Spindle speed: 18,000r/min
Parameters:
(1)Table size: 760x500mm
(2)Max. working depth: 60mm
(3)Throat depth: 650mm
(4)Spindle speed: 18,000r/min
(5)Max. tilting angle of table: 45°
(6)Spindle motor power: 3kw(4HP) 380V, 50Hz,3PH
(7)Overall dimensions (LxWxH): 1600X765X1500mm
(8)Net weight: 430kg
(2) Max. working depth: 60mm
(3) Throat depth: 650mm
(4) Spindle speed: 18,000r/min
Parameters:
(1)Table size: 760x500mm
(2)Max. working depth: 60mm
(3)Throat depth: 650mm
(4)Spindle speed: 18,000r/min
(5)Max. tilting angle of table: 45°
(6)Spindle motor power: 3kw(4HP) 380V, 50Hz,3PH
(7)Overall dimensions (LxWxH): 1600X765X1500mm
(8)Net weight: 430kg
MX508 Woodworking Router
(1) Table size:980x680mm
(2) Max. working depth: 80mm
(3) Throat depth: 650mm
(4) Spindle speed: 9000/18,000r/min
Parameters:
(1)Table size:980x680mm
(2)Max. working depth: 80mm
(3)Throat depth: 650mm
(4)Spindle speed: 9000/18,000r/min
(5)Spindle motor power: 3.3kw/4kw(4.4/5.5HP) 380V, 50Hz,3PH
(6)Overall dimensions (LxWxH): 1740x980x1680mm
(7)Net weight: 700kg
(2) Max. working depth: 80mm
(3) Throat depth: 650mm
(4) Spindle speed: 9000/18,000r/min
Parameters:
(1)Table size:980x680mm
(2)Max. working depth: 80mm
(3)Throat depth: 650mm
(4)Spindle speed: 9000/18,000r/min
(5)Spindle motor power: 3.3kw/4kw(4.4/5.5HP) 380V, 50Hz,3PH
(6)Overall dimensions (LxWxH): 1740x980x1680mm
(7)Net weight: 700kg
MXK5826 router cnc
1)MXK5826 router cnc
2)Table size:1505*3050mm
3)Working stroke:1350*2650mm
4)Feeding height:200mm
MXK5826 CNC Carving Machine
router cnc
carving machine
router
Table size
1505×3050mm
Working speed
35m/min
Working stroke
1350×2650mm
Tool handle diameter
6,12.7
Feeding height
200mm
Carving instruction
HPGL,G(code)
Spindle power
4.5kW
Overall dimensions
3185×2188×1600mm
Spindle speed
24000r/min
Net.weight
1200kg
2)Table size:1505*3050mm
3)Working stroke:1350*2650mm
4)Feeding height:200mm
MXK5826 CNC Carving Machine
router cnc
carving machine
router
Table size
1505×3050mm
Working speed
35m/min
Working stroke
1350×2650mm
Tool handle diameter
6,12.7
Feeding height
200mm
Carving instruction
HPGL,G(code)
Spindle power
4.5kW
Overall dimensions
3185×2188×1600mm
Spindle speed
24000r/min
Net.weight
1200kg
Mable CNC Router Machine
Mable CNC Router Machine
1.DSP controlling system
2.Linear guid rail
3.Spindle power : 2.2 KW
Mable CNC Router Machine
Characteristics:
1. a three-axis linear guide running smoothly, and high precision.
2.complete machine using seamless welding steel structure, rigid, and no deformation, the dorsal surface lining plate, strength, steel and good.
3.constant power spindle motor, cutting intensity, high efficiency.
4. the U-disk embedded control system completely offline to work more convenient and flexible.
Mable CNC Router Machine QL-1212
Machine Model
QL1212
X.Y working area
1200*1200mm
Z working area
120mm
Table
1300*1420mm
Max. Speed
6m/min
Max. working speed
4m/min
Working delicacy
0.005mm
Repositioning accuracy
0.05mm
Command
G code*.u00*.mmg*.plt
Surroundings for software
windows98/2000/xp
Power (spindle is not included)
1500w
Working voltage
AC220V/50Hz
Spindle power
2.2kw
Spindle rotating speed
0-24000rpm/min
Drive motor
Steper
Guarantee&Aftersales Service
Gurarantee for one year
24 hours technical surpport by email or calling
User-friend English manual and video CD for machine using and maintaining .
If you are interested in this machine,please feel free to contact us.
We will send you some detail information upon receiving your equiry.
We are looking farward to hearing from you .
1.DSP controlling system
2.Linear guid rail
3.Spindle power : 2.2 KW
Mable CNC Router Machine
Characteristics:
1. a three-axis linear guide running smoothly, and high precision.
2.complete machine using seamless welding steel structure, rigid, and no deformation, the dorsal surface lining plate, strength, steel and good.
3.constant power spindle motor, cutting intensity, high efficiency.
4. the U-disk embedded control system completely offline to work more convenient and flexible.
Mable CNC Router Machine QL-1212
Machine Model
QL1212
X.Y working area
1200*1200mm
Z working area
120mm
Table
1300*1420mm
Max. Speed
6m/min
Max. working speed
4m/min
Working delicacy
0.005mm
Repositioning accuracy
0.05mm
Command
G code*.u00*.mmg*.plt
Surroundings for software
windows98/2000/xp
Power (spindle is not included)
1500w
Working voltage
AC220V/50Hz
Spindle power
2.2kw
Spindle rotating speed
0-24000rpm/min
Drive motor
Steper
Guarantee&Aftersales Service
Gurarantee for one year
24 hours technical surpport by email or calling
User-friend English manual and video CD for machine using and maintaining .
If you are interested in this machine,please feel free to contact us.
We will send you some detail information upon receiving your equiry.
We are looking farward to hearing from you .
Magic laser router
1)Yag crystal laser router.
2)3 phase stepper motor
3)DSP control system.
4)CE quality
5)93 global distributor partners
Laser Cutting Machine—
IDM
TM
CLAYA Series
------------ Plasma price,laser quality !!
1)Sheet metal cutting and engraving
2)Yag crystal laser optical system technology
3)500W maximum power...
4)1064nm laser wavelength
5)A cantilever cutting machine
6)the fume aspiration system
7)water cooled
8)anti-corrosion layer of primer treated structure steel
9)servo motors command
10)move at 5000mm/min,cut at 2000mm/min,error less than 0.05mm...
11)autofocus adjust the height automatically
12)effective cutting area is 1300X2500mm
13)effective cutting thichness is 0.2-6mm
14)computer with professional software control all the system.
15)including laser power supply,the control cabinet and chiller...
16)need a floor surface of 6X6m.
17)Add a device can cut shapes in pipes.
Technical Data
Model
IDM
TM
YAG500
Effective cutting area
1300 mm x 2500 mm
Cutting thickness
0.2 mm – 6 mm
Material to be cut
Carbon steel, stainless steel, copper, aluminum, titanium,
Laser Maximum output power
500 W
Laser wavelength
1064 nm
Pulse frequency
1 – 300 Hz
Minimum line width
0.15 mm
Number of phases
3
Electrical supply
380V-50 Hz-100 A or other industrial supply
Chiller Power
5 HP
Accuracy
≤ 0.05 mm
Repeatability
≤ 0,03 mm
Maximum moving speed
5000 mm/min
Maximum cutting speed
2000 mm/min
Weight
3000 kg
2)3 phase stepper motor
3)DSP control system.
4)CE quality
5)93 global distributor partners
Laser Cutting Machine—
IDM
TM
CLAYA Series
------------ Plasma price,laser quality !!
1)Sheet metal cutting and engraving
2)Yag crystal laser optical system technology
3)500W maximum power...
4)1064nm laser wavelength
5)A cantilever cutting machine
6)the fume aspiration system
7)water cooled
8)anti-corrosion layer of primer treated structure steel
9)servo motors command
10)move at 5000mm/min,cut at 2000mm/min,error less than 0.05mm...
11)autofocus adjust the height automatically
12)effective cutting area is 1300X2500mm
13)effective cutting thichness is 0.2-6mm
14)computer with professional software control all the system.
15)including laser power supply,the control cabinet and chiller...
16)need a floor surface of 6X6m.
17)Add a device can cut shapes in pipes.
Technical Data
Model
IDM
TM
YAG500
Effective cutting area
1300 mm x 2500 mm
Cutting thickness
0.2 mm – 6 mm
Material to be cut
Carbon steel, stainless steel, copper, aluminum, titanium,
Laser Maximum output power
500 W
Laser wavelength
1064 nm
Pulse frequency
1 – 300 Hz
Minimum line width
0.15 mm
Number of phases
3
Electrical supply
380V-50 Hz-100 A or other industrial supply
Chiller Power
5 HP
Accuracy
≤ 0.05 mm
Repeatability
≤ 0,03 mm
Maximum moving speed
5000 mm/min
Maximum cutting speed
2000 mm/min
Weight
3000 kg
Manufacturer selling cnc router,woodworking engraving machine with dedusting system
1.water cooling spindle motor
2.Hiwin linear rail from Taiwan
3.precise control
4.CE
1224CNC Engraving Machine,woodworking engraving machine,1224cnc router
Features:
1) Lathe bed is cast iro wholly and firmly and will not deform
2) Imported ball screw rod and round guide rail to ensure accuracy
3) Subdivision stepper motor with excellent performance, quick speed, stable operation, and large cutting movement to ensure long and safe operation
4) Frequency conversion water-cooling large power motor, low noise, even speed
5) Humanistic design, the machine can be disassembled, so it is easily transported
6) The machine has dedusting system,make sure collet the dust of prossing.
CNC Engraving Machine Specifications:
Working size X,Y,Z
1200×2400×80mm
Command accepted
G code,u00,mmg,plt
Spindle Motor(optional)
1.5kw,Inverter-driven spindle motor cooled by water Option: Italian HSD air-cooled
Working mode
stepper
Spindel speed
0-24000rpm w/best frequency inverter
Drive mechanism
German imported ballscrew for x,y,z axis
XYZ Guide rail
X,Y,Z Round shaft
Option:
Square linear rail for X,Y,Z
Motion positioning accuracy
± 0.03/300mm
Repositioning accuracy
± 0.05mm
Max motion Speed
25,000mm/min
Max working speed
9,000mm/min
Engraving Tools
Ø3.175mm,Ø6.00mm
Operating voltage
AC110V/220V/50Hz/60Hz (optional)
Software
Type3, Wentai(ArtCUT), ArtCAM, Variable CAD/CAM software
Support software
Windows98/2000/XP
Operating system
Ncstudio PC control (Free) Option: Mach3 // DSP off-line control system with USB interface,128M flash memory
Applications(CE Authorized products):
a) Acryl engraving and relief
b) stone engraving and relief
c) Building models
d) Signs(pvc,metal ,palstic and so on )
e) Metal engarving and relief
f) Wooden models
g) Embossed pictures
2.Hiwin linear rail from Taiwan
3.precise control
4.CE
1224CNC Engraving Machine,woodworking engraving machine,1224cnc router
Features:
1) Lathe bed is cast iro wholly and firmly and will not deform
2) Imported ball screw rod and round guide rail to ensure accuracy
3) Subdivision stepper motor with excellent performance, quick speed, stable operation, and large cutting movement to ensure long and safe operation
4) Frequency conversion water-cooling large power motor, low noise, even speed
5) Humanistic design, the machine can be disassembled, so it is easily transported
6) The machine has dedusting system,make sure collet the dust of prossing.
CNC Engraving Machine Specifications:
Working size X,Y,Z
1200×2400×80mm
Command accepted
G code,u00,mmg,plt
Spindle Motor(optional)
1.5kw,Inverter-driven spindle motor cooled by water Option: Italian HSD air-cooled
Working mode
stepper
Spindel speed
0-24000rpm w/best frequency inverter
Drive mechanism
German imported ballscrew for x,y,z axis
XYZ Guide rail
X,Y,Z Round shaft
Option:
Square linear rail for X,Y,Z
Motion positioning accuracy
± 0.03/300mm
Repositioning accuracy
± 0.05mm
Max motion Speed
25,000mm/min
Max working speed
9,000mm/min
Engraving Tools
Ø3.175mm,Ø6.00mm
Operating voltage
AC110V/220V/50Hz/60Hz (optional)
Software
Type3, Wentai(ArtCUT), ArtCAM, Variable CAD/CAM software
Support software
Windows98/2000/XP
Operating system
Ncstudio PC control (Free) Option: Mach3 // DSP off-line control system with USB interface,128M flash memory
Applications(CE Authorized products):
a) Acryl engraving and relief
b) stone engraving and relief
c) Building models
d) Signs(pvc,metal ,palstic and so on )
e) Metal engarving and relief
f) Wooden models
g) Embossed pictures
(CE,ROHS, FCC approved) Telempire 3G wifi Router
Stylish and mobile 3G wifi Router
1,support 16 Devices use one Broadband Account
2,with SIM Card slot
3,warranty 1 year
MoFi Key Features:
Stylish, Ultra-Compact and mobile – built-in 3G modem(WCDMA ,CDMA EVDO and TDS-CDMA), Wireless Access Point, Router and Rechargeable Battery , Mobile devices charger (optional)
. Compact Size - Ideal Companion for Apple iPad, iPod touch and Sony PSP etc…
. Insert Your Data SIM Card and Create a Wireless Hotspot
. High-Speed Internet Access for up to 16 Devices Simultaneously with a Single mobile Broadband Account
HSDPA Downlink speed up to 7.2 mbps / HSUPA uplink up to 5.76mbps
. Supports Wireless N Standard with Data Speeds up to 150 mbps on local area network
. Battery Powered for2 to 5 Hours in one Power Charge Cycle
. Full Wireless Security Features - WEP, WPA, WPA2
. Simple Configuration and Management via Web Browser
. No Driver and Dialer Software Required to connect to the Internet
. Works with Windows 7/Vista/XP, MAC OS X, Linux and iPhone OS
MoFi - Technical Specification:
. Qualcomm solution for 3G connections
. Physical Dimension: 110 x 65 x 14mm
. Weight: 100g
. Battery Capacity: Li-ion 1800/1450mAh
. 2-5 hours operation
. 40 hours for idle time
Tri-brand3G: 850/1900/2100 Mhz
850 optional
Diversity: 2100 Mhz
Quad-band 2G: 850/900/1900/1900 Mhz
. Wireless IEEE 802.11b/g/n support
HSUPA mode: Category 6; Uplink: Up to 5.76mbps
HSDPA mode: Category 8; Downlink: Up to 7.2mbps
EDGE mode: multi slot Class 12
. Mini-USB connector
. Power/Battery
. Power/Reset button
. WPS button
. All settings of Mofi can be configured via web
. Signal Strength and connectivity status of WiFi and 3G
. SIM card PIN code configuration
. Traffic monitor
- Received, transmitted and connected time
. Router network configuration information
- IP address, DNS, net mask
. WiFi configuration information
- SSID, channel, security
. Connected client status
- IP address, MAC address, host name
. WiFi authentication - WEP, WPA, WPA2
. GPRS authentication - PAP, CHAP
. DHCP
. DNS proxy
. NAT
. Port forwarding - virtual server
. VPN Pass through
. WAN port convertor (optional)
. Auto-Connect mode
-Auto detect SIM card APN and configure data link profile accordingly
.Support External Antenna
Certifications:CE,RoHS
Warranty:12 months
Model Definitions<option>
Mofi-01 WCDMA HSPA ( HSUPA/HSDPA/EDGE/GPRS)
Mofi-02 CDMA EVDO REV.A 800MHZ
Mofi-03 CDMA EVDO REV.A 800/1900MHZ
Mofi-04 CDMA EVDO REV.A 450MHZ
Mofi-05 TD-SCDMA
1,support 16 Devices use one Broadband Account
2,with SIM Card slot
3,warranty 1 year
MoFi Key Features:
Stylish, Ultra-Compact and mobile – built-in 3G modem(WCDMA ,CDMA EVDO and TDS-CDMA), Wireless Access Point, Router and Rechargeable Battery , Mobile devices charger (optional)
. Compact Size - Ideal Companion for Apple iPad, iPod touch and Sony PSP etc…
. Insert Your Data SIM Card and Create a Wireless Hotspot
. High-Speed Internet Access for up to 16 Devices Simultaneously with a Single mobile Broadband Account
HSDPA Downlink speed up to 7.2 mbps / HSUPA uplink up to 5.76mbps
. Supports Wireless N Standard with Data Speeds up to 150 mbps on local area network
. Battery Powered for2 to 5 Hours in one Power Charge Cycle
. Full Wireless Security Features - WEP, WPA, WPA2
. Simple Configuration and Management via Web Browser
. No Driver and Dialer Software Required to connect to the Internet
. Works with Windows 7/Vista/XP, MAC OS X, Linux and iPhone OS
MoFi - Technical Specification:
. Qualcomm solution for 3G connections
. Physical Dimension: 110 x 65 x 14mm
. Weight: 100g
. Battery Capacity: Li-ion 1800/1450mAh
. 2-5 hours operation
. 40 hours for idle time
Tri-brand3G: 850/1900/2100 Mhz
850 optional
Diversity: 2100 Mhz
Quad-band 2G: 850/900/1900/1900 Mhz
. Wireless IEEE 802.11b/g/n support
HSUPA mode: Category 6; Uplink: Up to 5.76mbps
HSDPA mode: Category 8; Downlink: Up to 7.2mbps
EDGE mode: multi slot Class 12
. Mini-USB connector
. Power/Battery
. Power/Reset button
. WPS button
. All settings of Mofi can be configured via web
. Signal Strength and connectivity status of WiFi and 3G
. SIM card PIN code configuration
. Traffic monitor
- Received, transmitted and connected time
. Router network configuration information
- IP address, DNS, net mask
. WiFi configuration information
- SSID, channel, security
. Connected client status
- IP address, MAC address, host name
. WiFi authentication - WEP, WPA, WPA2
. GPRS authentication - PAP, CHAP
. DHCP
. DNS proxy
. NAT
. Port forwarding - virtual server
. VPN Pass through
. WAN port convertor (optional)
. Auto-Connect mode
-Auto detect SIM card APN and configure data link profile accordingly
.Support External Antenna
Certifications:CE,RoHS
Warranty:12 months
Model Definitions<option>
Mofi-01 WCDMA HSPA ( HSUPA/HSDPA/EDGE/GPRS)
Mofi-02 CDMA EVDO REV.A 800MHZ
Mofi-03 CDMA EVDO REV.A 800/1900MHZ
Mofi-04 CDMA EVDO REV.A 450MHZ
Mofi-05 TD-SCDMA
100% unlocked brand new mifi router huawei E583C
1.huawei E583C
2.DL 7.2Mbps 3G mifi router
3.HSPA/UMTS 2100/900 MHz
4.EDGE/GPRS/GSM 1900/1800/900/850 MHz
5.LED: OLED screen
Huawei E583C Router
Specifications
HSPA/UMTS 2100/900 MHz
EDGE/GPRS/GSM 1900/1800/900/850 MHz
HSUPA (UL) data service of up to 5.76 Mbps
HSDPA (DL) data service of up to 7.2 Mbps
Plug and play (PnP)
Internal memory: 128MB Flash, 64MB Memory
Power supply: AC: 100V~240V; DC: 5V, 1A
Battery : Type: Li (Rechargeable); Capacity: 3.7V, 1400mAh; Maximum working time: 3.5 hours; Maximum standby time: 100 hours
LED: OLED screen
key-press: power switch, WPS switch
Dimensions (D × W × H): 96.0mm×57.0mm×11.5mm
Weight: about 90g (including the battery)
USB Extension Cable, easy to connect
Standard mini USB interface
Built-in WCDMA and WLAN high gain antenna
External main diversity antenna interface
Micro Secure Digital Memory (Micro SD) Card
Windows Windows XP/ Windows Vista/ MAC operating system (OS) 10.4 and above
Design wise, the new 3.5G MiFi
Huawei E583C
hotspot looks great. With speeds of 5.67Mbps upstream and 7.2Mbps downstream a possibility it is also quite fast, dependent on signal of course.
Other features on the device include a microSD slot for storage (up to 32GB) as well as the addition of a 1 inch OLED screen to provide details of connectivity and battery life.
2.DL 7.2Mbps 3G mifi router
3.HSPA/UMTS 2100/900 MHz
4.EDGE/GPRS/GSM 1900/1800/900/850 MHz
5.LED: OLED screen
Huawei E583C Router
Specifications
HSPA/UMTS 2100/900 MHz
EDGE/GPRS/GSM 1900/1800/900/850 MHz
HSUPA (UL) data service of up to 5.76 Mbps
HSDPA (DL) data service of up to 7.2 Mbps
Plug and play (PnP)
Internal memory: 128MB Flash, 64MB Memory
Power supply: AC: 100V~240V; DC: 5V, 1A
Battery : Type: Li (Rechargeable); Capacity: 3.7V, 1400mAh; Maximum working time: 3.5 hours; Maximum standby time: 100 hours
LED: OLED screen
key-press: power switch, WPS switch
Dimensions (D × W × H): 96.0mm×57.0mm×11.5mm
Weight: about 90g (including the battery)
USB Extension Cable, easy to connect
Standard mini USB interface
Built-in WCDMA and WLAN high gain antenna
External main diversity antenna interface
Micro Secure Digital Memory (Micro SD) Card
Windows Windows XP/ Windows Vista/ MAC operating system (OS) 10.4 and above
Design wise, the new 3.5G MiFi
Huawei E583C
hotspot looks great. With speeds of 5.67Mbps upstream and 7.2Mbps downstream a possibility it is also quite fast, dependent on signal of course.
Other features on the device include a microSD slot for storage (up to 32GB) as well as the addition of a 1 inch OLED screen to provide details of connectivity and battery life.
35 pcs/set router bit
router bit
1)ISO9001:2008 quality management system
2)More than 20 years manufacturing experiences
router bit
35 PCS/SET ROUTER BITS (A)
ITEM NO.: DY0735001
NAME OF COMMODITY:
1. BEARING FLUSH TRIM BIT: 3/8"X1/2"
2. BEARING FLUSH TRIM BIT: 3/8"X1"
3. BEARING FLUSH TRIM BIT: 1/2"X1/2"
4. BEARING FLUSH TRIM BIT: 1/2"X1"
5. BEARING FLUSH TRIM BIT: 3/4"X1"
6. SLOT CUTTER BIT: 1-1/4"X1/4"
7. SLOT CUTTER BIT: 1-1/4"X5/16"
8. SLOT CUTTER BIT: 1-1/4"X3/8"
9. SLOT CUTTER BIT: 1-1/4"X1/2"
10. 45°CHAMFER BIT: 3/8"X1"
11. 45°CHAMFER BIT: 1/2"X1-3/16"
12. 45°CHAMFER BIT: 5/8"X1-7/16"
13. 45°CHAMFER BIT: 3/4"X1-5/8"
14. CORNER ROUND BIT: R1/4"
15. CORNER ROUND BIT: R3/8"
16. CORNER ROUND BIT: R1/2"
17. BEARING BIT: R1/4"
18. BEARING BIT: R3/8"
19. BEARING BIT: R1/2"
20. COVE BIT: R1/4"
21. COVE BIT: R3/8"
22. COVE BIT: R1/2"
23. ROMAN OGEE BIT: R1/8"
24. ROMAN OGEE BIT: R3/16"
25. ROMAN OGEE BIT: R1/4"
26. CURVED LINE BIT: R1/8"
27. CURVED LINE BIT: R1/4"
28. CLASSICAL BIT: R3/16"
29. CLASSICAL COVE BIT: R5/16"
30. WAVE EDGE BIT: R1/8"
31. CLASSICAL OGEE BIT: R3/16"
32. CLASSICAL OGEE BIT: R1/4"
33. DOUBLE ROMAN OGEE BIT: R1/8"
34. DOUBLE ROMAN OGEE BIT: R3/16"
35. DOUBLE ROMAN OGEE BIT: R1/4"
Please see other popular router bits sets in detail as below:
1)ISO9001:2008 quality management system
2)More than 20 years manufacturing experiences
router bit
35 PCS/SET ROUTER BITS (A)
ITEM NO.: DY0735001
NAME OF COMMODITY:
1. BEARING FLUSH TRIM BIT: 3/8"X1/2"
2. BEARING FLUSH TRIM BIT: 3/8"X1"
3. BEARING FLUSH TRIM BIT: 1/2"X1/2"
4. BEARING FLUSH TRIM BIT: 1/2"X1"
5. BEARING FLUSH TRIM BIT: 3/4"X1"
6. SLOT CUTTER BIT: 1-1/4"X1/4"
7. SLOT CUTTER BIT: 1-1/4"X5/16"
8. SLOT CUTTER BIT: 1-1/4"X3/8"
9. SLOT CUTTER BIT: 1-1/4"X1/2"
10. 45°CHAMFER BIT: 3/8"X1"
11. 45°CHAMFER BIT: 1/2"X1-3/16"
12. 45°CHAMFER BIT: 5/8"X1-7/16"
13. 45°CHAMFER BIT: 3/4"X1-5/8"
14. CORNER ROUND BIT: R1/4"
15. CORNER ROUND BIT: R3/8"
16. CORNER ROUND BIT: R1/2"
17. BEARING BIT: R1/4"
18. BEARING BIT: R3/8"
19. BEARING BIT: R1/2"
20. COVE BIT: R1/4"
21. COVE BIT: R3/8"
22. COVE BIT: R1/2"
23. ROMAN OGEE BIT: R1/8"
24. ROMAN OGEE BIT: R3/16"
25. ROMAN OGEE BIT: R1/4"
26. CURVED LINE BIT: R1/8"
27. CURVED LINE BIT: R1/4"
28. CLASSICAL BIT: R3/16"
29. CLASSICAL COVE BIT: R5/16"
30. WAVE EDGE BIT: R1/8"
31. CLASSICAL OGEE BIT: R3/16"
32. CLASSICAL OGEE BIT: R1/4"
33. DOUBLE ROMAN OGEE BIT: R1/8"
34. DOUBLE ROMAN OGEE BIT: R3/16"
35. DOUBLE ROMAN OGEE BIT: R1/4"
Please see other popular router bits sets in detail as below:
Manufacturers selling advertising engraving machine,cnc router
Manufacturers selling advertising engraving machine,cnc router.
Good product at a good price!
6090 CNC Engraving Machine,advertising engraving machine
CNC Engraving Machine Features:
1) Lathe bed is cast wholly and firmly and will not deform
2) Imported ball screw rod and round guide rail to ensure accuracy
3) Subdivision stepper motor with excellent performance, quick speed, stable operation, and large cutting movement to ensure long and safe operation
4) Frequency conversion water-cooling large power motor, low noise, even speed
5) Humanistic design, the machine can be disassembled, so it is easily transported
CNC Engraving Machine Specifications:
Working size X,Y,Z
600×900×150mm
Command accepted
G code,u00,mmg,plt
Spindle Motor(optional)
1.5kw,Inverter-driven spindle motor cooled by water Option: Italian HSD air-cooled
Working mode
stepper
Spindel speed
0-24000rpm w/best frequency inverter
Drive mechanism
German imported ballscrew for x,y,z axis
XYZ Guide rail
X,Y,Z Round shaft
Option:
Square linear rail for Y, round rail for X,Z
Motion positioning accuracy
± 0.03/300mm
Repositioning accuracy
± 0.05mm
Max motion Speed
25,000mm/min
Max working speed
9,000mm/min
Engraving Tools
Ø3.175mm,Ø6.00mm
Operating voltage
AC110V/220V/50Hz/60Hz (optional)
Software
Type3, Wentai(ArtCUT), ArtCAM, Variable CAD/CAM software
Support software
Windows98/2000/XP
Operating system
Ncstudio PC control (Free) Option: Mach3 // DSP off-line control system with USB interface,128M flash memory
Applications(CE Authorized products):
a) Chest species
b) Tablet species
c) Building models
d) Signs
e) Metal
f) Wooden models
g) Embossed pictures
Good product at a good price!
6090 CNC Engraving Machine,advertising engraving machine
CNC Engraving Machine Features:
1) Lathe bed is cast wholly and firmly and will not deform
2) Imported ball screw rod and round guide rail to ensure accuracy
3) Subdivision stepper motor with excellent performance, quick speed, stable operation, and large cutting movement to ensure long and safe operation
4) Frequency conversion water-cooling large power motor, low noise, even speed
5) Humanistic design, the machine can be disassembled, so it is easily transported
CNC Engraving Machine Specifications:
Working size X,Y,Z
600×900×150mm
Command accepted
G code,u00,mmg,plt
Spindle Motor(optional)
1.5kw,Inverter-driven spindle motor cooled by water Option: Italian HSD air-cooled
Working mode
stepper
Spindel speed
0-24000rpm w/best frequency inverter
Drive mechanism
German imported ballscrew for x,y,z axis
XYZ Guide rail
X,Y,Z Round shaft
Option:
Square linear rail for Y, round rail for X,Z
Motion positioning accuracy
± 0.03/300mm
Repositioning accuracy
± 0.05mm
Max motion Speed
25,000mm/min
Max working speed
9,000mm/min
Engraving Tools
Ø3.175mm,Ø6.00mm
Operating voltage
AC110V/220V/50Hz/60Hz (optional)
Software
Type3, Wentai(ArtCUT), ArtCAM, Variable CAD/CAM software
Support software
Windows98/2000/XP
Operating system
Ncstudio PC control (Free) Option: Mach3 // DSP off-line control system with USB interface,128M flash memory
Applications(CE Authorized products):
a) Chest species
b) Tablet species
c) Building models
d) Signs
e) Metal
f) Wooden models
g) Embossed pictures
Thursday, August 4, 2011
Manul Single Axis Copy Router for aluminum window door
this copy router used for copying process of various shapes on aluminium curtain wall materials, window materials,
The machine was equipped with two sets of molds, uses D5 and D8 milling cutters, capable of replicating complicated hole to the workpiece. By adjusting the stopper at the left of the end milling head and the positioning bar on the profile bracket, you can mill rectangular hole with it. All movements take place on the linear axis, while forming pin can rotate freely, allowing easy and flexible operation. Startup switch is located at the control lever, and on the level there is joint bearing for easy operation. Adopts pneumatic clamping operation, high automation. Rotate raising positioning black allow three different kinds of milling depth. All linear movement bearings and milling cutters are from Germany, durable and smooth.
MAIN TECHNIQUE PARAMETER
1.
Worktable size (WxH)
512x170mm
2.
Max. distance of milling head from left to right
260mm
3.
Max. distance of milling head from front to rear
130mm
4.
Max. space height of milling head
100mm
5.
Milling cutter diameter
3mm / 5mm / 8mm
6.
Milling cutter rotation speed
12000 rpm
7.
Motor power
1.1 Kw
8.
Motor rotation speed
2840 rpm
9.
Working air pressure
0.6-0.8Mpa
10.
Overall dimension (L×W×H)
640×660×1400mm
11.
Weight
250Kg
The machine was equipped with two sets of molds, uses D5 and D8 milling cutters, capable of replicating complicated hole to the workpiece. By adjusting the stopper at the left of the end milling head and the positioning bar on the profile bracket, you can mill rectangular hole with it. All movements take place on the linear axis, while forming pin can rotate freely, allowing easy and flexible operation. Startup switch is located at the control lever, and on the level there is joint bearing for easy operation. Adopts pneumatic clamping operation, high automation. Rotate raising positioning black allow three different kinds of milling depth. All linear movement bearings and milling cutters are from Germany, durable and smooth.
MAIN TECHNIQUE PARAMETER
1.
Worktable size (WxH)
512x170mm
2.
Max. distance of milling head from left to right
260mm
3.
Max. distance of milling head from front to rear
130mm
4.
Max. space height of milling head
100mm
5.
Milling cutter diameter
3mm / 5mm / 8mm
6.
Milling cutter rotation speed
12000 rpm
7.
Motor power
1.1 Kw
8.
Motor rotation speed
2840 rpm
9.
Working air pressure
0.6-0.8Mpa
10.
Overall dimension (L×W×H)
640×660×1400mm
11.
Weight
250Kg
Subscribe to:
Posts (Atom)