3G Wireless Router with USB 2.0 Port and WLAN

3G Wireless Router
Support USB 3G card/WCDMA/EDGEEVDO/TD-SCDMA/ HSPA
NAT & NAPT with VPN pass-through Virtual Server
NET432R is the first true Separation 3G Gateway, supports WIFI and Ethernet gateway in one device. It support use a USB 3G modem card, either WCDMA EDGEEVDOTD-SCDMA or HSPA as well, On Local area Network (LAN), it supports both the wireless WIFI 802.11b/g and wire Ethernet 10/100Mbps interfaces. It is designed with Easy-to-use compact. You can connect the Internet by WAN port, or insert the USB 3G modem card.

Features:
Support USB 3G modem card, WCDMA, EDGEEVDO, TD-SCDMA or HSPA as well.
High-speed data connections with rate up to 7.2Mbps
NAT & NAPT with VPN pass-through Virtual Server
Automatic receipt of IP address with DHCP server
Browser-based configuration
Access Control to manage users
User-friendly configuration and diagnostic utilities
Industry-leading firewall security
Supports 802.11b/g, Frequency from 2.4GHz to 2.483GHz, Access Points, Gateways and Gateway Server Applications

System Requirements:
A compatible USB 3G modem card with service
Broadband internet Access Service (DSL/Cable/Ethernet)
One DSL/Cable Modem that has an RJ45 connector (you do not need it if you connect the Gateway to the Ethernet)
Each PC in the LAN needs a working Ethernet Adapter and an Ethernet cable with RJ45 connectors
TCP/IP protocol must be installed on each PC
Web browser, such as Microsoft Internet Explorer 5.0 or later, Netscape Navigator 6.0 or later

Installation Environment Requirements
The Product should not be located where it will be exposed to moisture or excessive heat.
Place the Gateway in a location where it can be connected to the various devices as well as to a power source.
Make sure the cables and power cord are placed safely out of the way so they do not create a tripping hazard.
Designed to up to 100 meters indoors and up to 300 meters outdoors for wireless connection
The Gateway can be placed on a shelf or desktop.

Specifications:
1) 4 LED Indicators (Power, WIFI, WAN & LAN)
2) DC Power Input x 1 9V 1.5A 12V Car Use
3) 10/100 EthernetRJ-45 x 1
4) 10/100Wan RJ-45 x 1
5) External antenna: WIFI
6) Dimensions:125×120×30mm