router

router
1.two-bolt pole made in Germany,slideways imported from Japan
2.compatible CAD/CAM
3.travel speed:12Meter/minute
router
·Advanced DSP digit-control system , handle operation and large liquid crystal display brings out more convenient operation , simpler maintenance and much more human nature on the design of the machine.
·Unique intelligent calculation fully develops potential of the electric machinery and leads to high speed processing, the synchronization of curves and straight lines, smoother curves and race speed at 30m/min
·Unique and dynamic renewal of the system enables the customer, according to different processing requirements, to change the contr-olling ability of the system and therefore, effectively improves the processing efficiency ( Please start the operation with the instructions of the technical staff from the factory or agent)
·Large internal memory capacity of 32M is able to store 30 processing files simultaneously and open and process any of them
·Connection with the computer via USB interface enables data to be transmitted in a second, supports hot plug and play, no driver instal-lstion required(Window98/NT/2000/XP)
·More compatible: It is compatible with such CAD/CAM software like Type3/Artcam/Castmate/Proe/UG/Artcut etc,.
·Excellent two-bolt pole made in Germany and slideways made in Japan or Korea
·The spindle with high power and frequency conversion enables the machine to cut plexiglass of 20-30mm thick in one cut and process and manufacture advertising mode plates, presents and architectural wood models
·It is able to go on engraving when the electricity is cut or the tool is broken.
Type:
LD-1318H
Working Area:
2200×1440mm
Travel of Engraving:
1800×1300×120mm(Z Clearance of 200mm is optional)
Maximum Speed:
10000mm/min
Engraving Spindle
Inverter 1500W
Rotational Speed of Spindle
6000-24000rpm
Manner of Receiving Data
USB interface
Memory
32M
Format of Instructions
G code or HPGL
Cutter
Ø3.175orØ6.00
Power Supply
AC220/50-60HZ
Electric Power
1500W
Weight
600Kg
Attention: Further notice Of any change in technical parameters may not be given.