Tuesday, June 21, 2011

VPN wifi router support 802.11N

vpn wifi router
1.Firewall: DoS, SPI, MAC/IP Client Filtering, Hacker Attack Logging, Email
2.virtual server/application
Introduction
WG7005E11-LFis a high performance 802.11b/g+ wireless gateway with 4-ports
Fast Ethernet Switch for SOHO users to connect multiple PCs to the Internet via
single DSL/Cable line. The 802.11n-lite WIRELESS GATEWAY is a 90Mbps high
speed wireless residential gateway specially designed to provide simple and cost
attractive Internet Access solution for both home and SOHO users.
Its wireless LAN IEEE802.11b/g+, 10/100Mbps Ethernet LAN connectivity, and
Ethernet WAN interfaces provide users the flexibility of Internet connection.
The
Ethernet WAN interface is defined to link 802.11b/g+ WIRELESS GATEWAY to
Internet through any xDSL or Cable modem, and this connection enabling users
to link to Internet through its built-in 10/100Mbps Ethernet LAN or WLAN
(wireless
LAN) interface.
Besides flexibility on LAN connectivity, 802.11b/g+ WIRELESS GATEWAY also
provides network security and management features for users. Network Address
Translation (NAT), Dynamic Host Configuration Protocol (DHCP), advanced
packet filtering with hacker attack monitor, logging and stateful packet
inspection
(Firewall-SPI), Universal Plug and Play (UPnP), Dynamic DNS (DDNS), Wi-Fi
Protected Access (WPA), WPA2, and wireless to wire Ethernet bridging are all
supported.

1.2 Product Key feature
1.WEP, WPA/WPA2 security.
2.WDS
3.WPS
4.NAT IP sharing
5.Firewall: DoS, SPI, MAC/IP Client Filtering, Hacker Attack Logging, Email
6.Alert, Intrusion Detection, Key Word Blocking (HTML based)
7.Virtual Server/ Application Layer Gateway/ DMZ
8.Dynamic DNS
9.Universal Plug and Play (UPnP)GUI based management
10.Gateway features such as NAT, DHCP, and firewall. etc, to provide the
capability to construct private network.
11.NTP Time Server
12.Multiple Language UI
2.1 Hardware Interfaces
1.One 10/100 Base-T Ethernet LAN connection to WAN (broadband device,
like ADSL or Cable modem).
2.Four 10/100 Base-T Ethernet LAN connection to connect PC or network
device
3.An embedded 11b/g/n wireless on board
4.One external antenna
5.One reset button to default value
6.One push button for WPS(PCB Design should accommodate in the
front/back panel and top of cover, generic is on the top)
7.One power jack for external power adapter
2.2 Hardware Specification
1.Processor RT3050
2.MIPS 24KEc 384Mhz with 32KB I cache/16KB D cache
3.Embedded 2T2R 2.4G CMOS RF
4.Embedded 802.11n 1T1R MAC/BBP w/ MLD improvement
5.Embedded a 7 port Ethernet switch and a 5 port 10/100Mbps PHY
6.Support 16/32 bit SDR SDRAM (up to 64M bytes)
VPN wifi router suppport 302.11N

No comments:

Post a Comment