Manul Single Axis Copy Router for aluminum window door

this copy router used for copying process of various shapes on aluminium curtain wall materials, window materials,
The machine was equipped with two sets of molds, uses D5 and D8 milling cutters, capable of replicating complicated hole to the workpiece. By adjusting the stopper at the left of the end milling head and the positioning bar on the profile bracket, you can mill rectangular hole with it. All movements take place on the linear axis, while forming pin can rotate freely, allowing easy and flexible operation. Startup switch is located at the control lever, and on the level there is joint bearing for easy operation. Adopts pneumatic clamping operation, high automation. Rotate raising positioning black allow three different kinds of milling depth. All linear movement bearings and milling cutters are from Germany, durable and smooth.

MAIN TECHNIQUE PARAMETER
1.
Worktable size (WxH)
512x170mm
2.
Max. distance of milling head from left to right
260mm
3.
Max. distance of milling head from front to rear
130mm
4.
Max. space height of milling head
100mm
5.
Milling cutter diameter
3mm / 5mm / 8mm
6.
Milling cutter rotation speed
12000 rpm
7.
Motor power
1.1 Kw
8.
Motor rotation speed
2840 rpm
9.
Working air pressure
0.6-0.8Mpa
10.
Overall dimension (L×W×H)
640×660×1400mm
11.
Weight
250Kg