cisco 1841 IPS-SP Svc, AR NBD, Modular Router w/2xF
1 year warranty
can ship via FedEx,DHL.EMS...etc
Cisco CISCO1841 Power Description
Frequency: 50 Hz or 60 Hz
Power Consumption: 50W Maximum
Power Source: Power Supply
Cisco CISCO1841 Environmental Conditions
Temperature: 32 degrees F (0.0 degrees C) to 104 degrees F (40.0 degrees C) Operating
Temperature: -4 degrees F (-20.0 degrees C) to 149 degrees F (65.0 degrees C) Non-operating
Humidity: 5% to 95% Non-condensing Non-operating
Humidity: 10% to 85% Non-condensing Operating
Thermal Dissipation: 153 BTU/h
Cisco CISCO1841 Physical Characteristics
Form Factor: Desktop
Form Factor: Wall-mountable
Dimensions: 1.73 Height x 13.5 Width x 10.8 Depth
Dimensions: 1.87 Height x 13.5 Width x 10.8 Depth
Weight: 6.2 lb
Weight: 6 lb
Cisco CISCO1841 Miscellaneous
Additional Information:
Interface Card Slots:
Both slots on the Cisco 1841 router are HWIC slots and provide compatibility with WICs and multiflex trunk (VWICs) interface cards (for data only)
VoIP support:
Voice-over-IP (VoIP) pass-through only
Operating altitude:
10,000 feet (3000 meters) @ 77degrees F (25degrees C)
Noise level:
Normal operating temperature:
<78degrees F/25.6degrees C : 34 dBA
>78degrees F/25.6degrees C through <104degrees F/40degrees C: 37 dBA
>104degrees F/40degrees C: 42 dBA
System Requirements:
Cisco IOS Software release: 12.3(8)T
Cisco IOS Software release: 12.3(8)T
Certifications & Standards:
IEEE 802.3: 10BASE-T
IEEE 802.3u: 100BASE-TX
USB 1.1
Safety:
UL60950-1
CAN/CSA 60950-1
AS 3260
EN60950-1
EMI:
EN 55022, 1998, class A
CISPR22, 1997, class A
CFR47, Part 15, Subpart B, 1995, class A
EN61000-3-2 Harmonic Current Emission (only for equipment >75W but <16A)
EN61000-3-3 Voltage Fluctuation and Flicker (only for equipment (ce)16A)
Immunity:
CISPR24, 1997 ITE-Immunity characteristics, Limits and methods of measurement
EN 55024,1998 ITE-Immunity characteristics, Limits and methods of measurement
EN50082-1, 1997 Electromagnetic compatibility-Generic immunity standard, Part 1
EN 300 386, 1997 Telecommunications network equipment EMC requirements
The requirements are covered by the following standards:
IEC 61000-4-2:1995 Immunity to Electrostatic Discharges
IEC 61000-4-3:1995 Immunity to Radio Frequency Electromagnetic Fields
IEC 61000-4-4:1995 Immunity to Electrical Fast Transients
IEC 61000-4-5:1995 Immunity to Power Line Transients (Surges)
IEC 61000-4-6:1996 Immunity to Radio Frequency Induced Conducted Disturbances
IEC 61000-4-11:1995 Immunity to Voltage Dips, Voltage Variations, and Short Voltage Interruptions
Network homologation:
USA-TIA-968-A, T1.TRQ.6-2001
Canada-CS-03
European Union-RTTE Directive 5/99
Argentina-CTR 21
Australia-AS/ACIF S002, S003, S016 , S031, 3043
Brazil-225-540-788, CTR3, 225-100-717 Edition 3, NET 001/92 1990
China-ITU-G.992.1, ITU-G.992.1, ITU-G.991.2, CTR3, ITU I.431 1993
Hong Kong-HKTA 2033, HKTA 2033, HKTA 2014, HKTA 2017 Issue 3 2003, HKTA 2011 Issue 1, HKTA 2011 Issue 2, HKTA 2013 Issue 1
India-I_DCA_18_02_Jun_99-199, S/ISN-01/02 Issue 1999 S/ISN-02 1 1998, IR/PRI-01/02 Issue 1 1998, S/INT-2W/02 MAY 2001, S/INT-2W/02 MAY 2001
Israel-U.S. approval accepted
Japan-Technical condition (DoC acceptance in process)
Korea-U.S. approval accepted
Mexico-U.S. approval accepted
New Zealand-PTC 270/272, CTR 3, ACA 016 Revision 4 1997, PTC 200
Singapore-IDA TS ADSL1 Issue 1, IDA TS ADSL 2, IDA TS HDSL, IDA TS ISDN 1 Issue 1 1999, IDA TS ISDN 3 Issue 1 1999, IDA TS PSTN 1 Issue 4 , IDA TS PSTN 1 Issue 4, IDA TS PSTN 1 Issue 4
South Africa-U.S. approval accepted
Taiwan-U.S. approval accepted
IEEE 802.3: 10BASE-T
IEEE 802.3u: 100BASE-TX
USB 1.1
Safety:
UL60950-1
CAN/CSA 60950-1
AS 3260
EN60950-1
EMI:
EN 55022, 1998, class A
CISPR22, 1997, class A
CFR47, Part 15, Subpart B, 1995, class A
EN61000-3-2 Harmonic Current Emission (only for equipment >75W but <16A)
EN61000-3-3 Voltage Fluctuation and Flicker (only for equipment (ce)16A)
Immunity:
CISPR24, 1997 ITE-Immunity characteristics, Limits and methods of measurement
EN 55024,1998 ITE-Immunity characteristics, Limits and methods of measurement
EN50082-1, 1997 Electromagnetic compatibility-Generic immunity standard, Part 1
EN 300 386, 1997 Telecommunications network equipment EMC requirements
The requirements are covered by the following standards:
IEC 61000-4-2:1995 Immunity to Electrostatic Discharges
IEC 61000-4-3:1995 Immunity to Radio Frequency Electromagnetic Fields
IEC 61000-4-4:1995 Immunity to Electrical Fast Transients
IEC 61000-4-5:1995 Immunity to Power Line Transients (Surges)
IEC 61000-4-6:1996 Immunity to Radio Frequency Induced Conducted Disturbances
IEC 61000-4-11:1995 Immunity to Voltage Dips, Voltage Variations, and Short Voltage Interruptions
Network homologation:
USA-TIA-968-A, T1.TRQ.6-2001
Canada-CS-03
European Union-RTTE Directive 5/99
Argentina-CTR 21
Australia-AS/ACIF S002, S003, S016 , S031, 3043
Brazil-225-540-788, CTR3, 225-100-717 Edition 3, NET 001/92 1990
China-ITU-G.992.1, ITU-G.992.1, ITU-G.991.2, CTR3, ITU I.431 1993
Hong Kong-HKTA 2033, HKTA 2033, HKTA 2014, HKTA 2017 Issue 3 2003, HKTA 2011 Issue 1, HKTA 2011 Issue 2, HKTA 2013 Issue 1
India-I_DCA_18_02_Jun_99-199, S/ISN-01/02 Issue 1999 S/ISN-02 1 1998, IR/PRI-01/02 Issue 1 1998, S/INT-2W/02 MAY 2001, S/INT-2W/02 MAY 2001
Israel-U.S. approval accepted
Japan-Technical condition (DoC acceptance in process)
Korea-U.S. approval accepted
Mexico-U.S. approval accepted
New Zealand-PTC 270/272, CTR 3, ACA 016 Revision 4 1997, PTC 200
Singapore-IDA TS ADSL1 Issue 1, IDA TS ADSL 2, IDA TS HDSL, IDA TS ISDN 1 Issue 1 1999, IDA TS ISDN 3 Issue 1 1999, IDA TS PSTN 1 Issue 4 , IDA TS PSTN 1 Issue 4, IDA TS PSTN 1 Issue 4
South Africa-U.S. approval accepted
Taiwan-U.S. approval accepted
No comments:
Post a Comment