Netcomm HSUPA 3G wireless router 3G10WVT with MC8790V build-in
1.support voice call&VPN Pass-through
2.100% unlocked
3. 7.2M
Netcomm HSUPA 3G wireless router 3G10WVT with MC8790V build-in
Combines Next G™ Broadband service, Wi-Fi and Ethernet gateway in one device
International coverage through
tri-band HSUPA/HSDPA/UMTS (850 / 1900 / 2100 Mhz),
quad-band EDGE/GSM (850 / 900 / 1800 / 1900 Mhz)
Embedded multimode HSUPA/HSDPA/UMTS/EDGE/GPRS/GSM module
Removeable 3G and 802.11g antennas
USB 2.0 port for either print server or file server
Voice (Next G™ mobile call)
Static/Dynamic Route functions
Telstra Connection Manager USB key
CLI command interface
UPnP
Web-based management
WEP/WPA/WPA2 and 802.1x
Supports VPN Pass-through
address and IP filtering
Integrated 802.11g wireless access point (backward compatible with 802.11b)
Static route functions
DHCP Server/Relay/Client
DNS Proxy
Configuration backup and restoration
NAT/PAT
SIM PIN configuration
SNMP Client
Support Telstra IP WAN Service
Detailed Information
HSPA x 1
LAN Interface
• Ethernet x 2
Voice
• 1 RJ11 Voice port (circuit-switched)
USB 2.0
• Print Server or File Server (auto-sensing)
WLAN
&bull Address Filtering, WEP, WPA, IEEE 802.1X
• 10, 25, 50, 100mW @ 22MHz channel bandwidth Output power level can be selected according to the environment
Standard
• IEEE 802.11g, backward compatible with 802.11b
Channels
• 11 Channels (US )
• 13 Channels (Europe, Australia)
• 14 Channels (Japan)
WLAN Data rate
• Up to 54Mbps
WAN Connection PPP
• IP compression
• Data compression
Standard
• Comply with the 3GPP release 5 UMTS specification
Data Rate
•
HSUPA (up to 5.8Mbps uplink)
• HSDPA and UMTS(up to 7.2 Mbps downlink)
• EDGE / GPrS / GSM (up to 247 Kbps
)
Antenna Type
• Removable 3G antenna
• Removable 802.11g antenna
Management
• SNMP, SNTP, Telnet, Web-based management, Configuration backup and
restoration
• Firmware upgrade via HTTP,TFTP client and server, or FTP server
ROUTING FUNCTIONS
• Static/Dynamic route
• Static route, DMZ, DNS Proxy, DDNS
• NAT/PAT, NAT enable/disable to support Telstra IP WAN service
• DHCP Client/ Server/relay
Friday, July 29, 2011
Network Equipment 2811 Router
Cisco Router 2811
1.Bran-new/genuine/new sealed/original
2.1year warranty
3.in stock with good price
4.welcome to contact
Network Equipment 2811 Router
Note: the pictures enclosed are the products we’ve ever had or in stock now. Not exactly the one we delivered.
We
buy and sell
new CISCO and original or second hand network equipments all the time. Mainly focus on new original or high quality second hand equipments.
Our stock list will be updated everyday,
please feel free to contact us any time
when you wish to know more details.
Supply Voltage
100-240 VAC
Power dissipation
160W
Size:
445×438.2×416.6cm
Net weight
6.4,
CISCO 2811 Working Environment:
Working Temperature:
0 - 40
Humidity:
5% – 95% RH (No Condenser)
Storage Temperature:
-20 – 65
Humidity:
Storage
5% – 95% RH (No Condenser)
We provide:
1.CISCO, H3C, HP, Dell and so on: net work equipments, server, PC, notebook, and others relating to net work establishment.
2.Net work establishment proposal and consulting service.
3.Good after-sell services.
4.Experienced technicians for solving kinds of troubles
.
We are in the biggest IT storage of China, Beijing-Zhong Guan Cun, when you need any of our support; feel free to let us know, we will try best to be helpful. You will be welcomed any time.
Shipping note:
Shipping terms.
We ship using via DHL, FED-EX, EMS and UPS. Each box contains a packing slip, indicating its contents. It is the customer's responsibility to check the items received against the packing slip and notify Beijing Tomax regarding discrepancies immediately within 48 hours upon receipt of the equipment. All orders are securely packaged using foam, bubble rap, and sturdy cardboard boxes. In the event an item arrives damaged, it is the responsibility of the customer to immediately notify the shipping company within 48 hours. In the unfortunate event items are damaged, Beijing Tomax, will work with the customer and the shipping company to resolve the issue as soon as possible.
Returns and Exchanges.
Please do confirm your order carefully before placing. If you are not satisfied with your purchase, it is within 15 days of delivery, and the product was sold from existing inventory, we will accept the return of the working item in the same condition and packaging it was received. Returns are subject to a 20% restocking fee. The customer is responsible for any freight charges on all returns. All sales are final.
Products on promotion sell: (new & original )
CISCO Switch:
WS-C2918 series;
WS-C2960/2960G series;
WS-C3560/3560G series;
WS-C3750/3750G series;
CISCO Firewall:
ASA 5500 series
CISCO router;
CISCO1841, CISCO2811,CISCO2821,CISCO3825, CISCO3845
CISCO871-K9
CISCO MODULES AND ENGINES:
WS-X6704-10GE
WS-X6582-2PA
PA-MC-8TE1+
4904-10GE
PA-2FE-TX
WS-SUP720-3B
NM-8A/S
And So on.
1.Bran-new/genuine/new sealed/original
2.1year warranty
3.in stock with good price
4.welcome to contact
Network Equipment 2811 Router
Note: the pictures enclosed are the products we’ve ever had or in stock now. Not exactly the one we delivered.
We
buy and sell
new CISCO and original or second hand network equipments all the time. Mainly focus on new original or high quality second hand equipments.
Our stock list will be updated everyday,
please feel free to contact us any time
when you wish to know more details.
Supply Voltage
100-240 VAC
Power dissipation
160W
Size:
445×438.2×416.6cm
Net weight
6.4,
CISCO 2811 Working Environment:
Working Temperature:
0 - 40
Humidity:
5% – 95% RH (No Condenser)
Storage Temperature:
-20 – 65
Humidity:
Storage
5% – 95% RH (No Condenser)
We provide:
1.CISCO, H3C, HP, Dell and so on: net work equipments, server, PC, notebook, and others relating to net work establishment.
2.Net work establishment proposal and consulting service.
3.Good after-sell services.
4.Experienced technicians for solving kinds of troubles
.
We are in the biggest IT storage of China, Beijing-Zhong Guan Cun, when you need any of our support; feel free to let us know, we will try best to be helpful. You will be welcomed any time.
Shipping note:
Shipping terms.
We ship using via DHL, FED-EX, EMS and UPS. Each box contains a packing slip, indicating its contents. It is the customer's responsibility to check the items received against the packing slip and notify Beijing Tomax regarding discrepancies immediately within 48 hours upon receipt of the equipment. All orders are securely packaged using foam, bubble rap, and sturdy cardboard boxes. In the event an item arrives damaged, it is the responsibility of the customer to immediately notify the shipping company within 48 hours. In the unfortunate event items are damaged, Beijing Tomax, will work with the customer and the shipping company to resolve the issue as soon as possible.
Returns and Exchanges.
Please do confirm your order carefully before placing. If you are not satisfied with your purchase, it is within 15 days of delivery, and the product was sold from existing inventory, we will accept the return of the working item in the same condition and packaging it was received. Returns are subject to a 20% restocking fee. The customer is responsible for any freight charges on all returns. All sales are final.
Products on promotion sell: (new & original )
CISCO Switch:
WS-C2918 series;
WS-C2960/2960G series;
WS-C3560/3560G series;
WS-C3750/3750G series;
CISCO Firewall:
ASA 5500 series
CISCO router;
CISCO1841, CISCO2811,CISCO2821,CISCO3825, CISCO3845
CISCO871-K9
CISCO MODULES AND ENGINES:
WS-X6704-10GE
WS-X6582-2PA
PA-MC-8TE1+
4904-10GE
PA-2FE-TX
WS-SUP720-3B
NM-8A/S
And So on.
Thursday, July 28, 2011
Network Router PCB & PCBA Boards
OEM PCB assembly services
1.SMT assembly,PTH assembly,BGA assembly
2.Prototyping
3.Component purchase
4.Programming and
PCBA(2 Layer PCB Board)
1.Mould & Tooling.
2. Competitive price.
3.Good service.
4.High Quality.
PCBA(2 Layer PCB Board):1.Completed pcb with components service.
2.PCBA protorype
3.Trustful sourcing for PCBAs
Our companys manufacturing capability:
(1) For SMT placement: we place big quantity SMD components per day.
(2) For manual assembly: we have more about 700 workers , and are able to manually assemble full products 60K per day.
(3) We have 4 SunEast Reflow ovens with ROHS and UL compatibility.
Other Service:
(1) Our company can provide RHOS, CE, FCC, UL. Certificates for all our exported products.
(2) Our company has software and hardware engineers who can help our customers to design, change, or improve their products.
(3) Our company has technicians, product engineers, and quality control team to provide after-sale service for our customers.
Our OEM/ODM design team has the expertise to rapidly prototype upon the approval of finalized specifications. In addition, the winning of ISO-9001 certification ensures the exactitude of our research and development procedures with the highest product quality. For complete customer satisfaction, we also provide an extended product service and warranty program.
1.SMT assembly,PTH assembly,BGA assembly
2.Prototyping
3.Component purchase
4.Programming and
PCBA(2 Layer PCB Board)
1.Mould & Tooling.
2. Competitive price.
3.Good service.
4.High Quality.
PCBA(2 Layer PCB Board):1.Completed pcb with components service.
2.PCBA protorype
3.Trustful sourcing for PCBAs
Our companys manufacturing capability:
(1) For SMT placement: we place big quantity SMD components per day.
(2) For manual assembly: we have more about 700 workers , and are able to manually assemble full products 60K per day.
(3) We have 4 SunEast Reflow ovens with ROHS and UL compatibility.
Other Service:
(1) Our company can provide RHOS, CE, FCC, UL. Certificates for all our exported products.
(2) Our company has software and hardware engineers who can help our customers to design, change, or improve their products.
(3) Our company has technicians, product engineers, and quality control team to provide after-sale service for our customers.
Our OEM/ODM design team has the expertise to rapidly prototype upon the approval of finalized specifications. In addition, the winning of ISO-9001 certification ensures the exactitude of our research and development procedures with the highest product quality. For complete customer satisfaction, we also provide an extended product service and warranty program.
Network Router
wireless router, network router, broadband router,adsl modem router, 54m wireless router, cdma router,wireless lan router
We can provide you many models of Router and Wireless Router. Please kindly contact us for price list and product specification.
wireless router network router broadband router adsl modem router 54m wireless router cdma router wireless lan router ws-c2950-24 router network device network network switch
We can provide you many models of Router and Wireless Router. Please kindly contact us for price list and product specification.
wireless router network router broadband router adsl modem router 54m wireless router cdma router wireless lan router ws-c2950-24 router network device network network switch
Network Router
1,Standards Cabling Dimension
2,Superior performance, simple configuration
3,Standards Cabling Dimension 180*45*1.6MM
1,Standards Cabling Dimension
2,Superior performance, simple configuration
3,Standards Cabling Dimension 180*45*1.6MM
4,Supports Software online upgrade
Description:
The PL-ER504W-C1 Multifunctional Broadband Router is specially designed for small enterprise, office and SOHO(Small Office/Home Office) to access the Internet. It features strong functions, high performance, and easy configuration router. The MT-R6005A-B1 provides many management functions, including system, DHCP server, virtual server , DMZ host, firewall, and static routing table.
The PL-ER504W-C1 router provides flexible access control, limiting staff or children to browse selected sites. It connects to the Internet automatically or on demand and disconnects when idle to save on network costs. Quick Setup Wizard is supported and friendly help pages are provided for every step.
Features
1,Complies with IEEE 802.3, IEEE 802.3u standards
2,Supports TCP/IP,PPPOE, DHCP, ICMP, NAT, SNTP
3,1 10/100Mbps Auto-Negotiation WAN RJ45 port, Can be Xdsl/Cable
4,4 10/100Mbps Auto-Negotiation LAN ports, connect internet Network
5,Supports Auto-MDI/MDIX
6,Built-in NAT and DHCP server supporting static IP address distributing
7,Supports Port mirroring and MAC address filtering
8,Built-in Static Router,Virtual server,DMZ
9,Supports PPTP L2TP
10,Supports connecting/disconnecting Internet on a specified time of day
11,Supports Remote and Web management,Configuration English interface
12,Provide 16-bit SDRAM with selectable clock speed
13,Optional serial /parallel bus memory (up to 16MB)
14,Supports IPoE,PPPOE TCP/IP GRE/PPTP UDP/LITP
15,Supports Software online upgrade and firmware upgrade,
16,External manual reset switch
Application
SOHO broadband routers are widely used in smart home cabling system, the SME Internet use and other
Specifications:
Standards
IEEE 802.3; IEEE 802.3u
Ethernet Protocol
CSMA/CD
Ports
WAN: 1 10/100 Auto-MDI/MDIX RJ-45 Port
LAN: 4 10/100 Auto-MDI/MDIX RJ-45 Ports
Application Protocols
TCP/IP, PPPoE, DHCP, NAT,HTTP,DNS
Flow Control
IEEE 802.3x for Full duplex
Backpressure for Half duplex
LED
Power
WAN: Link/Act
LAN: Link/Act
Power
External, 7.5V~ 1A
Operating Temp.
0ºC ~ 40ºC
Operating Humidity
5% ~ 90%RH, Non-Condensing
Safety & Emission
FCC, CE
Dimension
180*45*1.6mm
2,Superior performance, simple configuration
3,Standards Cabling Dimension 180*45*1.6MM
1,Standards Cabling Dimension
2,Superior performance, simple configuration
3,Standards Cabling Dimension 180*45*1.6MM
4,Supports Software online upgrade
Description:
The PL-ER504W-C1 Multifunctional Broadband Router is specially designed for small enterprise, office and SOHO(Small Office/Home Office) to access the Internet. It features strong functions, high performance, and easy configuration router. The MT-R6005A-B1 provides many management functions, including system, DHCP server, virtual server , DMZ host, firewall, and static routing table.
The PL-ER504W-C1 router provides flexible access control, limiting staff or children to browse selected sites. It connects to the Internet automatically or on demand and disconnects when idle to save on network costs. Quick Setup Wizard is supported and friendly help pages are provided for every step.
Features
1,Complies with IEEE 802.3, IEEE 802.3u standards
2,Supports TCP/IP,PPPOE, DHCP, ICMP, NAT, SNTP
3,1 10/100Mbps Auto-Negotiation WAN RJ45 port, Can be Xdsl/Cable
4,4 10/100Mbps Auto-Negotiation LAN ports, connect internet Network
5,Supports Auto-MDI/MDIX
6,Built-in NAT and DHCP server supporting static IP address distributing
7,Supports Port mirroring and MAC address filtering
8,Built-in Static Router,Virtual server,DMZ
9,Supports PPTP L2TP
10,Supports connecting/disconnecting Internet on a specified time of day
11,Supports Remote and Web management,Configuration English interface
12,Provide 16-bit SDRAM with selectable clock speed
13,Optional serial /parallel bus memory (up to 16MB)
14,Supports IPoE,PPPOE TCP/IP GRE/PPTP UDP/LITP
15,Supports Software online upgrade and firmware upgrade,
16,External manual reset switch
Application
SOHO broadband routers are widely used in smart home cabling system, the SME Internet use and other
Specifications:
Standards
IEEE 802.3; IEEE 802.3u
Ethernet Protocol
CSMA/CD
Ports
WAN: 1 10/100 Auto-MDI/MDIX RJ-45 Port
LAN: 4 10/100 Auto-MDI/MDIX RJ-45 Ports
Application Protocols
TCP/IP, PPPoE, DHCP, NAT,HTTP,DNS
Flow Control
IEEE 802.3x for Full duplex
Backpressure for Half duplex
LED
Power
WAN: Link/Act
LAN: Link/Act
Power
External, 7.5V~ 1A
Operating Temp.
0ºC ~ 40ºC
Operating Humidity
5% ~ 90%RH, Non-Condensing
Safety & Emission
FCC, CE
Dimension
180*45*1.6mm
Network Router
1.Network Router
2.Wireless Router
3.High-Power 54Mbps Wireless Access Point
4.Supports hidden SSID function
Network Router, High-Power 54Mbps Wireless Access Point
Features:
1) High-Power solution provides you larger wireless range and enhance mobility of usage
2) IEEE 802.11b/g compliant with 54Mbps high-speed data rate
3) Operation modes: AP, Client, WDS, AP+WDS
4) DHCP Server/Client
5) Wireless users access control
6) Wireless security - 64/128bit WEP, WPA/WPA2, 802.1x, 802.11i and WPS
7) Support 802.1d Spanning Tree
8) Quick and easy setup with Web-based management utility
9) Detachable antenna allows user to replace higher gain antenna
Specification:
Standard
IEEE 802.11g/b
Frequency Band
2.400GHz ~ 2.484GHz
Radio type
IEEE 802.11g: OFDM(64-QAM, 16-QAM, QPSK, BPSK)
IEEE 802.11b: DSSS(CCK/DQPSK/DBPSK)
Data Rate
802.11g: 54, 48, 36, 24, 18, 12, 9 & 6Mbps
802.11b: 11, 5.5, 2 and 1 Mbps with auto-rate fall back
Access Protocol
CSMA/CA
Number of operation channel
2.412~2.462GHz (Canada, FCC) / 11 Channels
2.412~2.484GHz (Japan, TELEC) / 14 Channels
2.412~2.472GHz (Euro, ETSI) / 13 Channels
Operation Mode
AP
Client
WDS(WirelessDescription System)
AP+WDS
Security
64/128bit WEP
WPA(TKIP with IEEE 802.1x)
WPA2(AES with IEEE 802.1x)
WPS
RF Output Power(Typical)
802.11g: up to 24 ± 1 dBm
802.11b: up to 28 ± 1 dBm
Sensitivity
-68dBm @ 802.11g
-80dBm @ 802.11b
Antenna
One detachable 5dbi antenna(SMAconnector)
Dimension (mm)
285(L) x 217(W) x 58(H) (color box)
Weight
245g
Operation Temperature
0°C ~ 55°C ambient temperature
Storage Temperature
-20% ~ 70% ambient temperature
Humidity
10% ~ 90% (Non-condensing)
Connector
One antenna connector
One RJ-45 LAN ports
Reset to default button
WPS button
Power jack
Power requirement
12V/1A
2.Wireless Router
3.High-Power 54Mbps Wireless Access Point
4.Supports hidden SSID function
Network Router, High-Power 54Mbps Wireless Access Point
Features:
1) High-Power solution provides you larger wireless range and enhance mobility of usage
2) IEEE 802.11b/g compliant with 54Mbps high-speed data rate
3) Operation modes: AP, Client, WDS, AP+WDS
4) DHCP Server/Client
5) Wireless users access control
6) Wireless security - 64/128bit WEP, WPA/WPA2, 802.1x, 802.11i and WPS
7) Support 802.1d Spanning Tree
8) Quick and easy setup with Web-based management utility
9) Detachable antenna allows user to replace higher gain antenna
Specification:
Standard
IEEE 802.11g/b
Frequency Band
2.400GHz ~ 2.484GHz
Radio type
IEEE 802.11g: OFDM(64-QAM, 16-QAM, QPSK, BPSK)
IEEE 802.11b: DSSS(CCK/DQPSK/DBPSK)
Data Rate
802.11g: 54, 48, 36, 24, 18, 12, 9 & 6Mbps
802.11b: 11, 5.5, 2 and 1 Mbps with auto-rate fall back
Access Protocol
CSMA/CA
Number of operation channel
2.412~2.462GHz (Canada, FCC) / 11 Channels
2.412~2.484GHz (Japan, TELEC) / 14 Channels
2.412~2.472GHz (Euro, ETSI) / 13 Channels
Operation Mode
AP
Client
WDS(WirelessDescription System)
AP+WDS
Security
64/128bit WEP
WPA(TKIP with IEEE 802.1x)
WPA2(AES with IEEE 802.1x)
WPS
RF Output Power(Typical)
802.11g: up to 24 ± 1 dBm
802.11b: up to 28 ± 1 dBm
Sensitivity
-68dBm @ 802.11g
-80dBm @ 802.11b
Antenna
One detachable 5dbi antenna(SMAconnector)
Dimension (mm)
285(L) x 217(W) x 58(H) (color box)
Weight
245g
Operation Temperature
0°C ~ 55°C ambient temperature
Storage Temperature
-20% ~ 70% ambient temperature
Humidity
10% ~ 90% (Non-condensing)
Connector
One antenna connector
One RJ-45 LAN ports
Reset to default button
WPS button
Power jack
Power requirement
12V/1A
3D engraving and cutting CNC Router TM-1212DS
3D engraving and cutting CNC Router TM-1212DS
1.one moud made the body
2.water cooling spindle
3.high precision
3D engraving and cutting CNC Router TM-1212DS
Features
1. The TEMEI CNC routers are CE approved, 9years of experience on manufacturing CNC router, and well-sold to many oversea countries, such as Brazil, Malaysia, Pakistan, Singapore, Dubai, UK etc. And they are well accepted by the customers.
2. One mould made the body of the TEMEI CNC router to make sure the machine work more stable and the engraving & cutting precision is much higher than the welded machine.
3. Advanced DSP digit-control system, handle operation and large liquid crystal bring out more convenient operation, simpler maintenance
4. Unique intelligent calculation fully develops the potential of the motor and leads to high speed processing, the synchronization of curves and straight lines, smoother curves and race speed at 30m/min.
5. Large internal memory capacity of 32M is able to store 30 processing files simultaneously and open and process any of them.
6. Connection with the computer via USB interface enables data to be transmitted in a second supports hot plug and play, no driver installation required.
7. The spindle with high power and frequency conversion enables the machine to cut plexi glass of 20-30mm thick in one cut and process and manufacture advertising mode plates, presents and architectural wood models.
8. It is able to go on engraving when the electricity is cut or the tool is broken.
9. TEMEI CNC router adopts Lead shine driver which is the best in China and high power spindle.
Application
It is applicable to processing and making advertisement logo, founding mould, 3D mould, wood and architectural mould.
Optional
1) two or more linked spindles 1.5KW,
2) Vacuum inhaling with 5.5KW vacuum pump, large flux/output, can absorb the material very tight without any mark,
3) 2.2KW Industry Dust-collecting device
Parameters
Working area
1550 x 1320mm
Travel of engraving
1200 x 1200 x 90mm
Max engraving speed
6000mm /min
Power of spindle
Inverter 1500W
Rotation speed of spindle
6000-24000rpm
Manner of receiving data
USB interface
Capacity of memory
32M
Format of instructions
G code or HPGL
cutter
3.175 or 6.00 mm
Power supply
AC220v/50HZ
Electric power
600W
Driving system
stepper
weight
420kg
1.one moud made the body
2.water cooling spindle
3.high precision
3D engraving and cutting CNC Router TM-1212DS
Features
1. The TEMEI CNC routers are CE approved, 9years of experience on manufacturing CNC router, and well-sold to many oversea countries, such as Brazil, Malaysia, Pakistan, Singapore, Dubai, UK etc. And they are well accepted by the customers.
2. One mould made the body of the TEMEI CNC router to make sure the machine work more stable and the engraving & cutting precision is much higher than the welded machine.
3. Advanced DSP digit-control system, handle operation and large liquid crystal bring out more convenient operation, simpler maintenance
4. Unique intelligent calculation fully develops the potential of the motor and leads to high speed processing, the synchronization of curves and straight lines, smoother curves and race speed at 30m/min.
5. Large internal memory capacity of 32M is able to store 30 processing files simultaneously and open and process any of them.
6. Connection with the computer via USB interface enables data to be transmitted in a second supports hot plug and play, no driver installation required.
7. The spindle with high power and frequency conversion enables the machine to cut plexi glass of 20-30mm thick in one cut and process and manufacture advertising mode plates, presents and architectural wood models.
8. It is able to go on engraving when the electricity is cut or the tool is broken.
9. TEMEI CNC router adopts Lead shine driver which is the best in China and high power spindle.
Application
It is applicable to processing and making advertisement logo, founding mould, 3D mould, wood and architectural mould.
Optional
1) two or more linked spindles 1.5KW,
2) Vacuum inhaling with 5.5KW vacuum pump, large flux/output, can absorb the material very tight without any mark,
3) 2.2KW Industry Dust-collecting device
Parameters
Working area
1550 x 1320mm
Travel of engraving
1200 x 1200 x 90mm
Max engraving speed
6000mm /min
Power of spindle
Inverter 1500W
Rotation speed of spindle
6000-24000rpm
Manner of receiving data
USB interface
Capacity of memory
32M
Format of instructions
G code or HPGL
cutter
3.175 or 6.00 mm
Power supply
AC220v/50HZ
Electric power
600W
Driving system
stepper
weight
420kg
Subscribe to:
Posts (Atom)