New sealed and original CISCO 7613 Router

1.New Sealed and Original Cisco 7613 Router
2.Fast delivery and big discount
3.Min. Order: One Piece
Cisco 7613 Router

The Cisco
®
7613 Router is a high-performance router designed for deployment at the network edge where performance, IP services, and redundancy and fault resiliency are critical requirements. It enables Carrier Ethernet service providers to deploy an advanced network infrastructure that supports a range of IP video and triple-play (voice, video, and data) system applications in both the residential and business services markets. The Cisco 7613 enables enterprises to deploy advanced WAN and metropolitan-area network (MAN) networking solutions necessary to succeed in demanding, high-traffic environments.
Providing the foundation for a powerful combination of speed and services, the 13-slot Cisco 7613 Router is an outstanding choice for multiple applications. Whether deployed as a high-speed WAN aggregator, as a device for peering, as a residential broadband services aggregator, or as a device for Metro Ethernet aggregation and uplink, the Cisco 7613 meets requirements for redundancy, high availability, and rack density. In the point-of-presence (POP) service provider edge or the metropolitan network edge, the Cisco 7613 sets new standards as part of the industry-leading CISCO 7600 Series Routers.

The Cisco 7613 chassis accommodates a broad selection of line cards supporting numerous applications, including:
• SPAs and SIPs (Cisco 7600 Series SPA Interface Processor-200 [SIP-200], SIP-400, and SIP-600):
– Channelized T1/E1, Channelized T3, and Channelized OC-3/STM-1
– OC-3/STM-1, OC-12/STM-4, OC-48/STM-16 Packet over SONET/SDH (PoS), and OC-192/STM-64 PoS
– OC-3/STM-1 ATM, OC-12/STM-4 ATM, and OC-48/STM-16 ATM
– Fast Ethernet, Gigabit Ethernet, and 10 Gigabit Ethernet
• Enhanced FlexWAN module: Supporting Cisco 7200 and 7500 WAN Port Adapters from DS-0 to OC-3 for channelized and ATM interfaces and also Fast Ethernet port adapters
• High-density Ethernet services modules: 10/100 Mbps, Gigabit Ethernet, and 10 Gigabit Ethernet
• Services modules: IP Security (IPsec), firewall, distributed denial of service, intrusion detection systems, network analysis, and content switching commonly used, for example, in the Cisco Mobile Exchange solution
• Supervisor support: Cisco Catalyst 6500 Supervisor Engine 32 (WS-SUP32-GE-3B and WS-SUP32-10GE-3B), Cisco Catalyst 6500 Supervisor Engine 720 (WS-SUP720-3B and WS-SUP720-3BXL), and the new Cisco Route Switch Processor 720 (RSP720-3C and RSP720-3CXL)
Applications
The flexible Cisco 7613 Router is ideal for addressing high-performance applications such as:
• High-end customer premises equipment (CPE)
• Leased line
• IP/Multiprotocol Label Switching (MPLS) provider edge
• Metro Ethernet access
• Enterprise WAN aggregation
• Mobile Radio Access Network (RAN) aggregation
• Residential subscriber aggregation

Cisco 7613 System Features
• Total throughput: 720 Gbps
• Up to 400-Mpps distributed forwarding rate
Cisco 7613 Chassis Features
• Thirteen-slot Network Equipment Building Standards (NEBS)-compliant chassis
• Eighteen-RU (33.3 in. [82.3 cm]) chassis
• Up to 2 chassis per 7-foot rack
• Up to 12 interface slots (with 1 slot occupied by the forwarding and routing engine)
• Route processor and switch fabric protection capability: 1 + 1
• Power supply protection option, AC or DC: 1 + 1
• Single-side connection management for both interface and power terminations
• Horizontal line-card configurations
• Side-to-side airflow
Cisco 7613 Technical Specifications
• Minimum route processor requirement: one Supervisor Engine 2 with MFSC-2
• Dimensions
– Height: 33.3 in. (82.3 cm)
– Width: 17.2 in. (42.5 cm)
– Depth: 18.1 in. (44.7 cm)
• Power requirements: 208 to 240 VAC recommended (or -48 to -60 VDC)
• Mean time between failure (MTBF): 7 years for system configuration
• Environmental conditions:
– Operating temperature: 32 to 104°F (0 to 40°C)
– Storage temperature: -4 to 149°F (-20 to 65°C)
– Relative humidity, operating: 10 to 85%, noncondensing
– Relative humidity, storage: 5 to 95%, noncondensing
– Operating altitude: -500 to 10,000 ft.
Cisco 7613 Chassis Ordering Information
Part Number
Description
Spare Units (denoted by "=")
CISCO7613=
Cisco 7613 chassis, mounting kit, and cable guide
PWR-6000-DC=
6000W DC power supply for Cisco 7609/7609-S/7613
WS-CAC-6000W =
Spare AC power supply for the Cisco 7609/7609-S chassis
PWR-4000-DC=
4000W DC power supply for Cisco 7609/7613
WS-CAC-4000W-US=
Spare AC power supply for Cisco 7609 chassis (requires 30A circuit) US/Japan cord attached
WS-CAC-4000W-INT=
Spare AC power supply for Cisco 7609 chassis (requires 30A circuit) International cord attached
WS-CAC-3000W=
Spare 3000W AC power supply for the Cisco 7609 and 7613
WS-CDC-2500W=
Spare DC 2500W Supply
WS-C6513-RACK=
Cisco Catalyst 6513 Rack Mount Kit and Cable Organizer, spare
WS-C6K-13SLOT-FAN
Cisco 7613 fan tray, spare