Sunday, September 11, 2011

Cisco Networt Equipment Router CISCO878-K9

Cisco Network Router CISCO878-K9
Dynamic DNS Support for CISCO IOS
Generic routing encapsulation (GRE)
Cisco Networt Equipment Router CISCO878-K9


CISCOCISCO871-K9 10/100Mbps ADSL Router/over analog phone lines 4 x 10/100Mbps LAN Ports / 64MB DRAM / 1 VLAN
Routing Information
Protocol (RIPv1 and RIPv2)
Layer: 2 Tunneling Protocol (L2TP)
Network Address Translation (NAT) and Port Address Translation (PAT)
RFC 1483/2684 Point-to-Point Protocol over ATM (PPPoA) (CISCO 857) PPP over Ethernet (PPPoE) 802.1d Spanning Tree Protocol Dynamic Host Control Protocol (DHCP) server/relay/client
Access control lists (ACLs)
Generic routing encapsulation (GRE)
Dynamic DNS Support for CISCO IOS

Cisco 870 Series
WAN Technologies • Cisco 871 – 100 MB Ethernet
• Cisco 876 – ADSL over ISDN (ADSL2/ADSL2+)
• Cisco 877 – ADSL over analog telephone lines (ADSL2/ADSL2+)
• Cisco 878 – G .SHDSL (2- and 4-wire support)
LAN Switch Managed 4-port 10/100Base-T switch with autosensing MDI/MDX (Media Device
In/Media Device Crossover) for auto-crossover
Network Security Firewall, IPSec and AES High Speed Encryption, IPS, Antivirus through Cisco NAC,
IPSec, and AES High Speed Encryption, Cisco Easy VPN, DMVPN, DMZ, GET VPN
Upgradeability Cisco IOS Software upgrades and updates, memory upgrades

PHySICAL SPECIFICATIONS
Dimensions (H x W x D) :2 .00 x 10 .25 x 9 .13 in . (50 .8 x 260 .4 x 231 .9 mm) (wireless models with antenna connectors, excludes antennae)
2 .00 x 10 .25 x 8 .50 in . (50 .8 x 260 .4 x 215 .9 .9 mm) (non-wireless models)
Weight 2 .10 lbs .

POWER DISSIPATIONS
AC Input Voltage 100–240 VAC
Frequency 50–60 Hz
Maximum Output Power 26W (80W for optional external Inline PoE adapter)
Output Voltages 5 and 12V (48 VDC for optional external Inline PoE adapter)

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature 32–104°F (0 to 40°C)
Non-operating Temperature -4–149°F (-20 to 65°C)
Relative Humidity (non-condensing) 10–85%
Operating Altitude 0–10,000 ft . (0 to 3000 m)

Series Specifications
Flash Memory 24 MB (expandable to 52 MB)
System DRAM Memory 128 MB (expandable to 256 MB)
External Power Supply Universal 100–240 VAC
Console Port RJ-45
802.11b/g WLANs Optional on all models
LEDs PPP, VPN, ADSL, G .SHDSL, WLAN, LAN
USB 2.0 Ports for Advanced
Security Features Such as
Security Tokens 2 USB 2 .0 ports cannot be used for connecting external devices than
specified for the Cisco 871
ISDN Basic Rate Interface
(BRI) S/T Only available on Cisco 876 for out-of-band management
Power over Ethernet Optional external adapter for inline PoE for IP phones or external wireless
access point

Cisco 870 Series Products
CISCO871-K9 Dual Ethernet Security Router
CISCO871W-G-E-K9 Dual E Security Router with 802.11g ETSI Compliant
CISCO871W-G-J-K9 Dual E Security Router with 802.11g Japan Compliant
CISCO871W-G-A-K9 Dual E Security Router with 802.11g FCC Compliant
CISCO871-SEC-K9 Cisco 871 Security Bundle with Advanced IP Services
CISCO876-K9 ADSLoISDN Security Router
CISCO876-SEC-I-K9 Cisco 876 Security Bundle with Advanced Enterprise features
CISCO876-SEC-K9 Cisco 876 Security Bundle with Advanced IP Sevices
CISCO876W-G-E-K9 ADSLoISDN Security Router w/wireless 802.11g ETSI compliant
CISCO877-K9 ADSL Security Router
CISCO877-M-K9 ADSL Security Router with Annex M Support
CISCO877W-G-A-K9 ADSL Security Router with wireless 802.11g FCC compliance
CISCO877W-G-A-M-K9 ADSL Sec Router with wireless 802.11g and AnnexM
CISCO877W-G-J-K9 ADSL Security Router with wireless 802.11g Japan compliance
CISCO877W-G-E-K9 ADSL Security Router with wireless 802.11g ETSI compliant
CISCO877W-G-E-M-K9 ADSL Sec Router with wireless 802.11g and Annex M
CISCO877-SEC-K9 Cisco 877 Security Bundle with Advanced IP Services
CISCO878-K9 G.SHDSL Security Router
CISCO878-SEC-K9 Cisco 878 Security Bundle with Plus Feature Set
CISCO878W-G-A-K9 G.SHDSL Security Router w/wireless 802.11g FCC compliant
CISCO878W-G-E-K9 G.SHDSL Security Router with wireless 802.11g ETSI compliant

No comments:

Post a Comment