ORIGINAL CISCO 2811 INTAGRATED ROUTER

integrated network router
100% original cisco products
quality guaranted
reasonable price
1 year warranty
The Cisco 2811 Integrated Services Router provides the following support:

Wire-speed performance for concurrent services such as security and voice , and advanced services to multiple T1/E1/xDSL WAN rates
Enhanced investment protection through increased performance and modularity
Increased density through High-Speed WAN Interface Card Slots (four)
Enhanced Network Module Slot
Support for over 90 existing and new modules
Support for majority of existing AIMs, NMs, WICs, VWICs, and VICs
Two Integrated 10/100 Fast Ethernet ports
Optional Layer 2 switching support with Power over Ethernet (PoE) (as an option)
Cisco 2800 Series
Cisco 2811
Product Architecture
DRAM
• Default: 256 MB
• Maximum: 768 MB
Compact Flash
• Default: 64 MB
• Maximum: 256 MB
Fixed USB 1.1 Ports
2
Onboard LAN Ports

Onboard AIM (Internal) Slot

Interface Card Slots
4 slots, each slot can support HWIC, WIC, VIC, or VWIC type modules




PVDM (DSP) Slots on Motherboard

Integrated Hardware-Based Encryption

VPN Hardware Acceleration (on Motherboard)

Optional Integrated In-Line Power (PoE)

Console Port

(up to 115.2 kbps)
Auxiliary Port

(up to 115.2 kbps)
Minimum Cisco IOS Software Release

Rack Mounting
Yes, 19- and 23-in. options
Wall Mounting
Yes
Power Requirements
AC Input Voltage

AC Input Frequency

AC Input Current

AC Input Surge Current

AC-IP Maximum In-Line Power Distribution
160W
AC-IP Input Current

AC-IP Input Surge Current

DC Input Voltage
24 to 60 VDC, autoranging positive or negative
DC Input Current
• 8A (24V)
• 3A (60V)
• Startup current 50A<10 ms
Typical Power Dissipation
32W (109 BTU/hr)
(No Modules)
Power Dissipation-AC without IP Phone Support
170W (580 BTU/hr)
Power Dissipation-AC with IP Phone Support-System Only
210W (717 BTU/hr)
Power Dissipation-AC with IP Phone Support-IP Phones
160W (546 BTU/hr)
Power Dissipation-DC
180W (614 BTU/hr)
RPS
External only, connector for RPS provided by default
Recommended RPS Unit
Cisco RPS-2300 Redundant Power System
Environmental Specifications
Operating Temperature

Non-Operating Temperature
-40° to 158°F (-40° to 70°C)
Maximum Operating Temperature at Altitude
• 40°C @ sea level
• 40°C @ 6,000 ft
(1800 m)
• 30°C @ 13,000 ft (4000 m)
• 27.2°C @ 15,000 ft (4600 m)
Note: Derate 1.4°C per 1,000 ft above 6,000 ft
Operating Humidity
5 to 85%RH, non-condensing
Dimensions (H x W x D)
• 1.75 x 17.25 x 16.4 in.
• (44.5 x 438.2 x 416.6 mm)
Rack Height

Weight (Fully Configured)
14 lb (6.4 kg)
Noise Level (Min/Max)
• 47 dBA for normal operating temperature (<90°F/32.2°C)
• 57 dBA (@ maximum fan speed)



we provide new seal Cisco products
we provide 1800 series.
cisco 1801
cisco 1802
cisco 1811/k9
cisco 1841
cisco 1801/k9
cisco 1841-sec-k9
2800 series
cisco 2801
cisco 2821
cisco 2811
cisco 2851
cisco 2801-sec/k9
cisco 2811-sec/k9
cisco 2821-sec/k9
cisco 2851-sec/k9
3800 series
cisco 3825
cisco 3825-srst/k9
cisco 3825-v/k9
cisco 3825-sec/k9
cisco 3845
cisco 3845-srst/k9
cisco 3845-v/k9
cisco 3845-sec/k9
if you have any questions ,pls feel free to contact with Echo Yang.